|
Std ID |
Description (Standard Title) |
|
NB/SH/T 0839-2010
|
Standard test method for low-temperature torque of grease-lubricated wheel bearings
|
|
NB/SH/T 0324-2010
|
Standard test method for oil separation from lubricating grease (Conical sieve method)
|
|
NB/SH/T 0586-2024
|
(Industrial enclosed gear oil change indicators)
|
|
NB/SH/T 0699-2023
|
(Refrigeration oil and refrigerant compatibility test method)
|
|
NB/SH/T 0764-2023
|
(Test method for coking of diesel engine nozzle XUD-9 method)
|
|
NB/SH/T 6072-2023
|
(Filtration of Particulate Contaminants in Lubricating Oils)
|
|
NB/SH/T 6073-2023
|
(Method for determination of fuel oil dilution content in internal combustion engine oil - surface acoustic wave method)
|
|
NB/SH/T 6077-2023
|
(Determination of glycol-based coolant in lubricating oil)
|
|
NB/SH/T 6079-2023
|
(Vehicle engine oil and rubber compatibility determination method)
|
|
NB/SH/T 6080-2023
|
(Evaluation of Diesel Engine Oil Performance Caterpillar C13 Method)
|
|
NB/SH/T 6040-2021
|
Rotate vector (RV) gear oil for robot
|
|
NB/SH/T 6042-2021
|
Lubricant oil for electric vehicle reducer
|
|
NB/SH/T 0703-2020
|
Standard test method for measuring apparent viscosity at high-temperature and high-shear rate by multicell capillary viscometer
|
|
NB/SH/T 6007-2020
|
Standard test method for determining the foaming and air release properties of industrial gear oils for FLENDER foam test procedure
|
|
NB/SH/T 0976-2019
|
Standard test method for bench oxidation of engine oils by ROBO apparatus
|
|
NB/SH/T 0983-2019
|
Standard test method for low temperature viscosity of drive line lubricants in a constant shear stress viscometer
|
|
NB/SH/T 0987-2019
|
(High-frequency linear vibration (SRV) standard test piece wear volume measurement method)
|
|
NB/SH/T 0973-2018
|
Criteria for changing oil of wind turbine main gear oil
|
|
NB/SH/T 0189-2017
|
Standard test method for wear preventive characteristics of lubricating fluid. four-ball method
|
|
NB/SH/T 0505-2017
|
Standard test method for determination of shear stability of polymer-containing oils by ultrasonic shear method
|
|
NB/SH/T 0656-2017
|
Standard test methods for instrumental determination of carbon, hydrogen, and nitrogen in petroleum products and lubricants
|
|
NB/SH/T 0944.1-2017
|
Standard test method for wear preventive characteristics of lubricating fluid. FE8 rolling bearing method. Part 1: Lubricating oil
|
|
NB/SH/T 0957-2017
|
Standard test method for evaluation of the ability of engine oil to emulsify water and simulated Ed85 fuel
|
|
NB/SH/T 0518-2016
|
Standard test method for evaluation of load-capacity capacity of lubricants under conditions of low speed and high torque used for final hypoid drive axles
|
|
NB/SH/T 0920-2016
|
Standard test method for determining fretting wear resistance of lubricating greases under high Hertzian contact pressures using a high-frequency, linear-oscillation(SRV)test machine
|
|
NB/SH/T 0922-2016
|
Standard test method for evaluating the micro-pitting capacity of lubricating oils (FZG method)
|
|
NB/SH/T 0924-2016
|
Standard test method for evaluation of engine oils for roller follower wear in light-duty diesel engine
|
|
NB/SH/T 0925-2016
|
Evaluation of the synchromesh endurance life using the FZG SSP180 synchromesh test rig
|
|
NB/SH/T 0926-2016
|
Standard test method for measurement of effects of automotive engine oils on fuel economy of passenger cars and light-duty trucks in sequence VID spark ignition engine
|
|
NB/SH/T 0931-2016
|
Standard test method for condition monitoring of oxidation in in-service petroleum and hydrocarbon based lubricants by trend analysis using Fourier transform infrared(FT-IR) spectrometry
|
|
NB/SH/T 0935-2016
|
Standard practice for condition monitoring of sulfate by-products in in-service petroleum and hydrocarbon based lubricants by trend analysis using Fourier transform infrared (FT-IR) spectrometry
|
|
NB/SH/T 0937-2016
|
Standarded test method for determination of resistance performance to ammonia for refrigerator lubricants
|
|
NB/SH/T 0940-2016
|
Standard test method for analysis of in-service lubricants using particular four-part integrated tester(Atomic emission spectroscopy, infrared spectroscopy, viscosity, and laser particle counter)
|
|
NB/SH/T 0893-2015
|
Oil dispersion test at medium temperature for passenger car direct injection diesel engines
|
|
NB/SH/T 0894-2015
|
Test method for sonic shear stability of polymer-containing oils
|
|
NB/SH/T 0896-2015
|
Standard test method for evaluation of automotive engine oils in the sequence ⅢG spark-ignition engine
|
|
NB/SH/T 0897-2015
|
Standard test method for evaluation of automotive engine oils in the sequence IVA spark-ignition engine
|
|
NB/SH/T 0898-2015
|
Standard test method for evaluation of automotive engine oils for inhibition of deposit formation in a spark-ignition internal combustion engine fueled with gasoline and operated under low-temperature, light-duty conditions
|
|
NB/SH/T 0899-2015
|
Standard test method for measurement of effects of automotive engine oils on fuel economy of passenger cars and light-duty trucks in sequence VIB spark ignition engine
|
|
NB/SH/T 0901-2015
|
Standard test method for determining the glass transition temperatures of mineral oil-Differential scanning calorimetry
|
|
NB/SH/T 0904-2015
|
Testing methods for oxidation stability of automatic transmission fluid
|
|
NB/SH/T 0906-2015
|
Determination of high temperature deposits of engine oils by hot tube test
|
|
NB/SH/T 0907-2015
|
Standard practice for conditon monitoring of phosphate antiwear additivies in in-service petroleum and hydrocarbon based lubricants by trend analysis using Fourier transform infrared (FT-IR)spectrometry
|
|
NB/SH/T 0911-2015
|
Standard practice for set-up and operation of Fourier transform infrared (FT-IR)spectrometers for in-service oil condition monitoring
|
|
NB/SH/T 0912-2015
|
Standard test method for determination of kinematic viscosity at 100℃ of engine test oils
|
|
NB/SH/T 0517-2014
|
Standard test method for evaluation of moisture eorrosion resistance of automotive gear lubricants
|
|
NB/SH/T 0723-2014
|
Standard test method for evaluation of corroesiveness of diesel engine oil at 121℃
|
|
NB/SH/T 0877-2014
|
The evaluation of oil-elastomer compatibility
|
|
NB/SH/T 0878-2014
|
Test equipment and instructions for hydraulic fluids performance evaluation on Parker pumps(Vane and Piston)
|
|
NB/SH/T 0880-2014
|
Standard test method for determination of caldmm, chlorine, copper, magnesium, phospehorus, sulfur, and zinc in unused lubricating ails and additives by wavelength dispersive X-ray fluorescence spectromefry (mathematical correction procedure)
|
|
NB/SH/T 0882-2014
|
Standard teat method for determining extreme pressure properties of lubricating oils using SRV test machine
|
|
NB/SH/T 0884-2014
|
Standard test method for Cummins ISM test
|
|
NB/SH/T 0885-2014
|
Determination and total aromatics and total saturates in lube base stocks by high performance liquid chromatography (HPLC) with refractive index detection
|
|
NB/SH/T 0891-2014
|
Spectrophotometric detection of soot in used engine oil samples
|
|
NB/SH/T 0538-2013
|
Criteria for change of compressor oils used in light duty rotary oil-flooded air compressor
|
|
NB/SH/T 0562-2013
|
Standard test method for determination of yield stress and apparent viscosity of engine oils at low temperature
|
|
NB/SH/T 0599-2013
|
Criteria for change oil of L-HM hydraulic oil
|
|
NB/SH/T 0636-2013
|
Criteria for changing of L-TSA turbine oils
|
|
NB/SH/T 0856-2013
|
Standard test method for evaluating the high temperature detergency of diesel engine oils for agriculture use
|
|
NB/SH/T 0857-2013
|
Passenger car direct injection diesel engine ring sticking and piston cleanliness test
|
|
NB/SH/T 0861-2013
|
Standard test method for pentane insolubles by membrane filtration
|
|
NB/SH/T 0862-2013
|
Standard test method for determination of yield stress and apparent viscosity of used engine oils at low temperature
|
|
NB/SH/T 0867-2013
|
Standard test method for determination of soot in diesel engine oils by thermal gravimetric analyzer
|
|
NB/SH/T 0876-2013
|
Standard test method for trace ethylene glycol in used engine oil
|
|
NB/SH/T 5001.1-2013
|
Energy consumption statistics indices and calculation methods for refinery in petrochemical industry
|
|
NB/SH/T 5001.2-2013
|
Energy consumption statistics indices and calculation methods for ethylene plant in petrochemical industry
|
|
NB/SH/T 0137-2013
|
Criteria for change of anti-ammonia turbine oil
|
|
NB/SH/T 0306-2013
|
Standard test method for evaluating the scuffing load capacity of oils (FZG visual method)
|
|
NB/SH/T 0474-2010
|
Standard test method for gasoline diluent in used gasoline engine oils by gas chromatography
|
|
NB/SH/T 0586-2010
|
Criteria for changing oil of enclosed industrial gear oil
|
|
NB/SH/T 0808-2010
|
Diesel fuel diluent in used diesel engine oils by gas chromatograph
|
|
NB/SH/T 0822-2010
|
Standard test method for determination of phosphorus, sulfur, clacium, and zinc in lubrication oils by energy dispersive X-ray fluorescence spectroscopy
|
|
NB/SH/T 0824-2010
|
Standard test method for determination of additive elements in lubricating oils by inductively coupled plasma atomic emission spectrometry
|
|
NB/SH/T 0826-2010
|
Standard test method for estimation of engine oil volatility by capillary gas chromatography
|
|
NB/SH/T 0832-2010
|
Determination of hot surface oxidation of lubricating oils by pressure differential scanning calorimetry
|
|
NB/SH/T 0834-2010
|
Standard test method for determination of moderately high temperature piston deposits by thermooxidation engine oil simulation test (TEOST MHT)
|
|
NB/SH/T 0838-2010
|
Determination of polycyclic aromatics (PCA) in unused lubricating base oils and asphaltene free petroleum fractions. Dimethyl sulphoxide extraction refractive index method
|
|
NB/SH/T 0840-2010
|
Four-stroke cycle motorcycle gasoline engine oils. Friction property test method for clutch system
|
|
NB/SH/T 0844-2010
|
Standard test method for corrosiveness and oxidation stability of turbine oils
|
|
NB/SH/T 0845-2010
|
Determination of viscosity shear stability of transmission lubricants using the tapered roller bearing rig
|
|
NB/SH/T 0847-2010
|
Standard test method for measuring friction and wear properties of extreme pressure (EP) lubricating oils using SRV test machine
|
|
NB/SH/T 0852-2010
|
Standard test method for determining the viscosity-temperature relationship of used and soot-containing engine oils at low temperature
|
|
NB/SH/T 0059-2010
|
Standard test method for evaporation loss of lubricating oils by the Noack method
|
|
NB/T 11687-2024
|
(Determination of α-olefins in coal-based Fischer-Tropsch synthetic oil)
|
|
NB/SH/T 0713-2023
|
(Determination of benzene and toluene content in gasoline - Gas chromatography)
|
|
NB/SH/T 6078-2023
|
Standard test method for benzene hydrocarbons and naphthalene hydrocarbons in jet fuels - Comprehensive two-dimensional gas chromatography
|
|
NB/T 34013-2023
|
(Agricultural alcohol ether diesel fuel)
|
|
NB/SH/T 0765-2021
|
(Evaluation of diesel oil lubricity high-frequency reciprocating testing machine method)
|
|
NB/SH/T 6003-2020
|
Standard guide for microbial contamination in fuels and fuel systems
|
|
NB/SH/T 6004-2020
|
Determination of alcohols, ethers and ketones in naphtha. Gas chromatography
|
|
NB/SH/T 6012-2020
|
Standard test method for determination of phosphorus content in fatty acid methyl ester by inductively coupled plasma optical emission spectrometry(ICP-OES)
|
|
NB/SH/T 6014-2020
|
Standard test method for nitrogen compounds in middle distillates by gas chromatography-nitrogen chemiluminescence detection
|
|
NB/SH/T 0606-2019
|
(Determination of hydrocarbon composition of middle distillates)
|
|
NB/SH/T 0711-2019
|
Standard test method for manganese in gasoline by atomic absorption spectroscopy
|
|
NB/SH/T 0984-2019
|
Standard test method for determination of the aromatic content and polynuclear aromatic content of diesel fuels and aviation turbine fuels by supercritical fluid chromatography
|
|
NB/SH/T 0986-2019
|
Standard test method for determination of total oxygen in gasoline, diesel and methanol fuels by reductive pyrolysis
|
|
NB/SH/T 0991-2019
|
(Determination of aniline compounds in gasoline - Gas chromatography - nitrogen chemiluminescence)
|
|
NB/SH/T 0992-2019
|
(Determination of sodium, potassium, calcium and magnesium in fatty acid methyl esters by inductively coupled plasma atomic emission spectrometry)
|
|
NB/SH/T 0993-2019
|
(Determination of silicon content in gasoline and related products - Single-wavelength dispersive X-ray fluorescence spectrometry)
|
|
NB/SH/T 0994-2019
|
(Separation and determination of oxygen and nitrogen-containing additives in gasoline Solid phase extraction / gas chromatography - mass spectrometry)
|