|
US$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
LY/T 2064-2012: Technical regulation of production for potted anthurium
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| LY/T 2064-2012 | English | 259 |
Add to Cart
|
3 days [Need to translate]
|
Technical regulation of production for potted anthurium
| Valid |
LY/T 2064-2012
|
PDF similar to LY/T 2064-2012
Basic data | Standard ID | LY/T 2064-2012 (LY/T2064-2012) | | Description (Translated English) | Technical regulation of production for potted anthurium | | Sector / Industry | Forestry Industry Standard (Recommended) | | Classification of Chinese Standard | B62 | | Classification of International Standard | 65.020 | | Word Count Estimation | 10,181 | | Regulation (derived from) | State Forestry Administration Notice 2012 No. 5; industry standard filing Notice 2012 No. 4 (No. 148 overall) | | Issuing agency(ies) | State Forestry Administration | | Summary | This standard specifies the anthurium flower production facilities of the basic requirements, production preparation, seedlings production, finished flower production, packaging and transportation of the technical requirements. This standard applies to po | LY/T 2064-2012: Technical regulation of production for potted anthurium---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Technical regulation of production for potted anthurium
ICS 65.020
B62
People's Republic of China Forestry Industry Standard
Anzu flower pot flower production technical regulations
Published on.2012-02-23
2012-07-01 implementation
State Forestry Administration released
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard is proposed and managed by the National Flower Standardization Technical Committee.
This standard was drafted. Tianjin Garden and Flower Management Center.
The main drafters of this standard. Zou Meng, Wu Guozhi, Zong Jingying, Zhang Peipei, Jiang Qianyun, Liu Zhanhai, Jiang Laicheng, Yan Lijiang, Zhao Wanzhen, Zhang Wei,
Dai Songxiang, Zhang Lei, Liu Rong.
Anzu flower pot flower production technical regulations
1 Scope
This standard stipulates the basic requirements of Anzu flower pot flower production facilities, pre-production preparation, large seedling production, finished flower production, packaging and transportation.
skills requirement.
This standard applies to the large-scale production of Anzu flower pots.
2 Terms and definitions
The following terms and definitions apply to this document.
2.1
Flowering rate ratioofblossom
The number of fully-opened buds in each pot of Anthurium accounts for the percentage of the total number of buds.
3 Basic requirements for production facilities
The covering material should have good lighting, airtightness and heat preservation; the temperature should be controlled at 18 ° C ~ 30 ° C; the light intensity should be controllable
Between 6000lx~20000lx; air humidity should be controlled at 75%~90%; configure ventilation windows, fans and other ventilation equipment, as well as purified water
Processing equipment and fertilizing equipment.
4 Production preparation
4.1 Disinfection of facilities
Before the production, the greenhouse and various equipment should be fumigated and disinfected. Generally, it should be sealed for 3d~5d. It can be used after 1d ventilation.
4.2 Matrix
4.2.1 Peat charcoal with a fiber length of 10 mm to 20 mm, a pH of 5.5 to 6.0, and an EC value of less than 0.4 mS/cm should be selected.
4.2.2 The substrate should be sterilized by drugs or sterilized by high temperature steam before use. Drug disinfection is carried out during the preparation of the matrix, and sprayed while stirring during preparation.
The fungicide and the insecticide are mixed and sterilized by plastic film for 7 days. The plastic film is removed and dried for 7 days to 10 days. The water content of the substrate is adjusted to 50% before use.
60%; high temperature steam disinfection using a steam sterilizer at 70 ° C ~ 80 ° C for 20 min, use after cooling.
4.3 flower pot
It is advisable to use an opaque plastic basin. Medium and small flower type Anthurium varieties, large seedling production using φ6cm~φ8cm plastic pots, finished peanuts
Production of plastic pots of φ14cm~φ16cm; large-flower varieties of seedlings use plastic bowls of φ8cm~φ12cm, finished flower production
Use a plastic basin of φ18cm~φ21cm.
4.4 Fertilizer
It is advisable to use special fertilizer for Anthurium.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of LY/T 2064-2012_English be delivered?Answer: Upon your order, we will start to translate LY/T 2064-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of LY/T 2064-2012_English with my colleagues?Answer: Yes. The purchased PDF of LY/T 2064-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|