|
US$154.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 4857.9-2008: Packaging -- Basic tests for transport packages -- Part 9: Water spray test
Status: Valid GB/T 4857.9: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 4857.9-2008 | English | 154 |
Add to Cart
|
3 days [Need to translate]
|
Packaging -- Basic tests for transport packages -- Part 9: Water spray test
| Valid |
GB/T 4857.9-2008
|
| GB/T 4857.9-1992 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Packaging-Complete filled transport packages--Water spray test
| Obsolete |
GB/T 4857.9-1992
|
PDF similar to GB/T 4857.9-2008
Basic data | Standard ID | GB/T 4857.9-2008 (GB/T4857.9-2008) | | Description (Translated English) | Packaging -- Basic tests for transport packages -- Part 9: Water spray test | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A80 | | Classification of International Standard | 55.020 | | Word Count Estimation | 8,891 | | Date of Issue | 2008-05-27 | | Date of Implementation | 2009-01-01 | | Older Standard (superseded by this standard) | GB/T 4857.9-1992 | | Quoted Standard | GB/T 4857.1; GB/T 4857.2 | | Adopted Standard | ISO 2875-2000, IDT | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 9, 2008 (No. 122 overall) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies requirements for transport packages and unit loads for spray test equipment used when the main performance requirements, test procedures and test reports. Can also be used for other tests on the package before the pretreatment method of washout due to reduced strength caused by the package case. This section applies to assess transport packages and unit loads on anti- dumping rain on the contents and packaging performance protection capabilities. It can be used as single test can be used as part of test series. | GB/T 4857.9-2008: Packaging -- Basic tests for transport packages -- Part 9: Water spray test---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
.. Packaging Basic tests for transport packages Part 9. Water spray test
ICS 55.020
A80
National Standards of People's Republic of China
GB/T 4857.9-2008/ISO 2875.2000
Replacing GB/T 4857.9-1992
Basic tests for transport packages
Part 9. Test methods for spray
(ISO 2875.2000, Packaging-Complete, filedtransportpackagesand
unitloads-Water-spraytest, IDT)
Posted 2008-05-27
2009-01-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 4857 "Basic tests for transport packages" is divided into the following sections.
--- Part 1. The test method for labeling various parts;
--- Part 2. Temperature and humidity adjustment process;
--- Part 3. Test methods for stacking static load;
--- Part 4. Compression and Stacking tests using a method of pressure testing machine;
--- Part 5. drop test method;
--- Part 6. Test methods for rolling;
--- Part 7. sinusoidal vibration test method given frequency;
--- Part 9. Water spray test;
--- Part 10. Test methods for sinusoidal vibration frequency;
--- Part 11. horizontal impact test method;
--- Part 12. Test methods for immersion;
--- Part 13. Low air pressure;
--- Part 14. Test methods for tipping;
--- Part 15. Controlled horizontal impact test method;
--- Part 17. compilation of performance test of the general principles;
--- Part 18. compilation of performance test of quantitative data;
--- Part 19. Flow test information recorded;
--- Part 20. Test methods for collision;
--- Part 21. Test methods for mold;
--- Part 22. Unit loads stability test methods;
--- Part 23. Test method for random vibration.
This section GB/T 94857 Part of.
This part identical with ISO 2875.2000 "Packaging intact, filled transport packages and unit loads spray test."
GB/T 4857.9-1992 "Transport packages spray test" in this section instead.
Section compared with the GB/T 4857.9-1992 The main changes are as follows.
--- In the scope of the original will only apply to the transport package modified to apply to transport packages and unit loads;
--- Adds a chapter terms and definitions, to increase the "test sample" term;
--- Chapter 4 Test principle increases the continuous and intermittent spraying;
--- 5.2 adds methods A and B;
--- Canceled 6.1 to 6.3 (1992 edition);
--- Increased in Chapter 6;
--- Increased 5.3 sprinkler system;
--- Increased 5.4 sprinklers schematic in Figure 1;
--- To modify Chapter 5 (1992 edition) was 7.1 (this version);
--- Modify the contents of the test report.
This part of the National Packaging Standardization Technical Committee (SAC/TC49) and focal points.
GB/T 4857.9-2008/ISO 2875.2000
This section drafted by. the Ministry of Railways Institute of Standards and Metrology.
The main drafters of this section. orchid Shumei, Zhang Jin, Zhao Hua, Bai Zhigang, Su Xuefeng.
This part of the standard replaces the previous editions are.
--- GB 4857.9-1986; GB/T 4857.9-1992.
GB/T 4857.9-2008/ISO 2875.2000
Basic tests for transport packages
Part 9. Test methods for spray
1 Scope
GB/T 4857 provisions of this part of the time used to transport packages and unit cargo spray test test equipment main performance
Requirements, test procedures and test the contents of the report. Pretreatment methods can also be used to package other tests performed before the study due to water washout and
Resulting in reduced strength of the package case.
This section applies to assess transport packages and unit loads of anti-dumping rain on the performance and packaging contents protection. It can
As a single test, it can be used as part of the series of tests.
2 Normative references
The following documents contain provisions which, through reference in this part of the GB/T 4857, constitute provisions of this part. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 4857.1 Transport packages when test each part of the labeling method (GB/T 4857.1-1992,
ISO 2206. 1987, MOD)
GB/T 4857.2 Transport packages temperature and humidity conditioning (GB/T 4857.2-2005, ISO 2233.2000,
MOD)
3 Terms and Definitions
The following terms and definitions apply GB/T 4857 of this section.
3.1
Complete, filled transport packages and unit loads.
4 Test principle
The test sample is placed in the ground test site, at a certain temperature water at a predetermined time and rate of the test sample surface spray.
Spray method is divided into continuous (Method A) and (Method B) batch.
5 Test equipment and conditions
5.1 Test Site
The test area shall meet the following requirements.
--- Thermal insulation and heating. As necessary to control the temperature of the test site, the site can be insulated or heated. Should be set to the Ground
GB/T 4857.9-2008/ISO 2875.2000
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 4857.9-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 4857.9-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 4857.9-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 4857.9-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 4857.9-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 4857.9-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|