Path: Home > GB/T > Page249 > GB/T 43593-2023 Home > Standard_List > GB/T > Page249 > GB/T 43593-2023

GB/T 43593-2023 English PDF

US$369.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 43593-2023: Ferrite cores - Standard inductance factor for gapped cores and its tolerance
Status: Valid

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
GB/T 43593-2023	English	369	Add to Cart	4 days [Need to translate]	Ferrite cores - Standard inductance factor for gapped cores and its tolerance	Valid	GB/T 43593-2023

PDF similar to GB/T 43593-2023

Standard similar to GB/T 43593-2023

GB/T 36103.1 SJ/T 10412 SJ/T 10410 GB/T 43795 GB/T 43870.1

Basic data

Standard ID	GB/T 43593-2023 (GB/T43593-2023)
Description (Translated English)	Ferrite cores - Standard inductance factor for gapped cores and its tolerance
Sector / Industry	National Standard (Recommended)
Classification of Chinese Standard	L19
Classification of International Standard	29.100.10
Word Count Estimation	18,194
Date of Issue	2023-12-28
Date of Implementation	2024-04-01
Issuing agency(ies)	State Administration for Market Regulation, China National Standardization Administration

GB/T 43593-2023: Ferrite cores - Standard inductance factor for gapped cores and its tolerance

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 29:100:10 CCSL19 National Standards of People's Republic of China Standard inductors with ferrite cores and air-gap cores Factors and their tolerances (IEC 62358:2012,MOD) Published on 2023-12-28 2024-04-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee

PrefaceⅠ Introduction II 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Measurement methods 2 5 AL values and their tolerances 2 5:1 General 2 5:2 Tolerance 2 5:3 E-type core 2 5:4 ETD type core and EER type core 2 5:5 EP type core 2 5:6 RM type core 2 5:7 Pot Core 2 5:8 PQ type core 2 5:9 Low profile core 3 Table 1 Code corresponding to tolerance 2 Table 2 AL value and tolerance of E-type core (IEC 63093-8) 4 Table 3 AL values and tolerances of ETD type cores (IEC 63093-6) and EER type cores (IEC 63093-7) 6 Table 4 AL value and tolerance of EP type core (IEC 63093-5) 7 Table 5 AL value and tolerance of RM type core (IEC 63093-4) 7 Table 6 AL values and tolerances of pot cores (IEC 63093-2) 8 Table 7 AL value and tolerance of PQ type core (IEC 63093-13) 9 Table 8 AL value and tolerance of EL type core (IEC 63093-9)10 Table 9 AL value and tolerance of EL-I (planar) core (IEC 63093-9) 11 Table 10 AL values and tolerances for low profile ER-I (planar) type cores (IEC 63093-9)12 Table 11 AL values and tolerances for low profile ER type cores (IEC 63093-9)13 Table 12 AL values and tolerances for low profile EI (planar) type cores (IEC 63093-9)14 Table 13 AL values and tolerances for low profile E-type cores (IEC 63093-9)14 Table 14 AL values and tolerances of low-profile RM type cores (IEC 63093-4)15 Table 15 AL values and tolerances for low profile PQ-I (planar) type cores (IEC 63093-13)15

Foreword

This document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting: This document has been modified to adopt IEC 62358:2012 "Standard inductance factors and their tolerances for ferrite cores with air gaps": Compared with IEC 62358:2012, this document has made the following structural adjustments: ---A chapter of "Terms and Definitions" has been added, and the subsequent chapter numbers have been postponed: The technical differences between this document and IEC 62358:2012 and their reasons are as follows: ---Replaced the withdrawn IEC 62317-8 with IEC 63093-8 (see Table 2); ---Replaced the withdrawn IEC 61185 with IEC 63093-6 (see Table 3); ---Replaced the withdrawn IEC 62317-7 with IEC 63093-7 (see Table 3); ---Replaced the withdrawn IEC 61596 with IEC 63093-5 (see Table 4); ---Added the specifications of EP type magnetic core, as well as the corresponding AL value and tolerance (see EP5 and EP30 in Table 4) to adapt to my country's technology technical conditions to increase operability; ---Replaced the withdrawn IEC 62317-4 with IEC 63093-4 (see Table 5, Table 14); ---Replaced the withdrawn IEC 62317-2 with IEC 63093-2 (see Table 6); ---Added the specifications of the can core, as well as the corresponding AL value and tolerance (see P3:3/2:6 and P4:6/3:1 in Table 6) to adapt to our country technical conditions to increase operability; ---Deleted the specification P42×29 of the pot core, as well as the corresponding AL value and tolerance (see Table 6), consistent with IEC 63093-2; ---Replaced the withdrawn IEC 62317-13 with IEC 63093-13 (see Table 7, Table 15); ---Added the specifications of PQ type core, as well as the corresponding AL value and tolerance (see PQ16/11:6, PQ65/54, PQ78/39, PQ107/87) to adapt to my country's technical conditions and increase operability; ---Replaced the withdrawn IEC 62317-9 with IEC 63093-9 (see Table 8~Table 13): The following editorial changes have been made to this document: ---Changed the expression form of the IEC reference core specifications in the table (see Table 2, Table 5, and Table 6) to be consistent with the current standards; ---Change the core specification "ER40×10×32" to "ER40×10×28" (see Table 11), consistent with IEC 63093-9: Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents: This document is proposed by the Ministry of Industry and Information Technology of the People's Republic of China: This document is under the jurisdiction of the National Magnetic Components and Ferrite Materials Standardization Technical Committee (SAC/TC89): This document was drafted by: Tiantong Holdings Co:, Ltd: The main drafters of this document: Song Yanyan, Bruce Lee, Shao Feng, Ma Zhanhua, Tan Weizhong, Jin Guoxin, Meng Guofeng:

Introduction

The AL value (inductance factor) of ferrite gapped cores and their tolerances have traditionally been specified by the user: When a manufacturer wishes to have a short When back-ordering inventory, they need to hold unprocessed air-gap products due to the lack of standards for AL values: With the development of e-commerce and the As the need to deliver products quickly increases, it will be more convenient for both users and suppliers to refer to established AL values and tolerances: Development of this document Just to meet this need: After the implementation of this document, core suppliers and users will easily use soft ferrite air-gap cores to develop electronic components: Traditional enterprises and new companies in new areas such as e-commerce will benefit: It is recommended that users specify AL values by selecting AL values through this file: It is recommended to use the tolerances in this document, but for historical reasons, manufacturing Specifications of some components may vary from manufacturer to manufacturer: The user is required to confirm the tolerances in the manufacturer's documentation: Encourage manufacturers to establish Air-gap cores are in stock for short-term delivery using the AL values in this document: Where the user or manufacturer specifies an air gap length with a tolerance Below, AL values will be approximate only without tolerance: This situation would be beyond the scope of this document: Standard inductors with ferrite cores and air-gap cores Factors and their tolerances

1 Scope

This document specifies the standards for E-type, ETD-type, EER-type, EP-type, RM-type, can-type, PQ-type and low-profile air-gap ferrite cores: Quasi AL value (inductance factor) and its tolerance: This document applies to the design, development, and production of air-gap ferrite cores:

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document: Note: GB/T 19764-2005 Selection guide for priority numbers and priority number integer series (ISO 497:1973, IDT) IEC 62044-2 Methods of measurement of magnetic cores made of soft magnetic materials Part 2: Magnetic properties at low excitation levels (Coresmade Note: GB/T 28869:2-2023 Measurement methods for magnetic cores made of soft magnetic materials Part 2: Magnetic properties at low excitation levels (IEC 62044-2: 2005,IDT) IEC 63093-2 Guidelines for limits on dimensions and surface defects of ferrite cores Part 2: Can magnets for communications, power supplies and filters IEC 63093-4 Guidelines for limits of size and surface defects of ferrite cores Part 4: RM type cores (Ferritecores- IEC 63093-5 Guidelines for limits of size and surface defects of ferrite cores Part 5: Type EP cores for inductors and transformers IEC 63093-6 Guidelines for limits of size and surface defects of ferrite cores Part 6: ETD type cores for power supplies (Ferrite power supplies) IEC 63093-7 Guidelines for limits of size and surface defects of ferrite cores Part 7: EER type cores (Ferritecores- Note: GB/T 36103:7-2018 Ferrite core dimensions Part 7: EER type core (IEC 62317-7:2005, MOD) IEC 63093-8 Guidelines for limits of size and surface defects of ferrite cores Part 8: Type E cores (Ferritecores- IEC 63093-9 Guidelines for limits of dimensions and surface defects of ferrite cores Part 9: Planar cores (Ferritecores- IEC 63093-13 Guidelines for limits of size and surface defects of ferrite cores Part 13: PQ type cores (Ferritecores-

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 43593-2023_English be delivered?

Answer: Upon your order, we will start to translate GB/T 43593-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 43593-2023_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 43593-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.