HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 25359-2023 English PDF

US$1659.00 · In stock
Delivery: <= 9 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 25359-2023: Petroleum and natural gas industries - Packaged reciprocating gas compressors
Status: Valid

GB/T 25359: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 25359-2023English1659 Add to Cart 9 days [Need to translate] Petroleum and natural gas industries - Packaged reciprocating gas compressors Valid GB/T 25359-2023
GB/T 25359-2010EnglishRFQ ASK 10 days [Need to translate] Petroleum and natural gas industries -- Packaged reciprocating gas compressors Obsolete GB/T 25359-2010

PDF similar to GB/T 25359-2023


Standard similar to GB/T 25359-2023

GB/T 13277.1   GB/T 33625   GB/T 4976   GB/T 25358   GB/T 25357   

Basic data

Standard ID GB/T 25359-2023 (GB/T25359-2023)
Description (Translated English) Petroleum and natural gas industries - Packaged reciprocating gas compressors
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J72
Classification of International Standard 23.140
Word Count Estimation 82,86
Date of Issue 2023-05-23
Date of Implementation 2023-12-01
Older Standard (superseded by this standard) GB/T 25359-2010
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GB/T 25359-2023: Petroleum and natural gas industries - Packaged reciprocating gas compressors

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 23:140 CCSJ72 National Standards of People's Republic of China Replacing GB/T 25359-2010 Integrated skid-mounted reciprocating compressors for the oil and gas industry (ISO 13631:2002, MOD) Released on 2023-05-23 2023-12-01 implementation State Administration for Market Regulation Released by the National Standardization Management Committee

table of contents

Preface III Introduction V 1 Scope 1 2 Normative references 1 3 Terms and Definitions 3 4 Statutory requirements4 5 General 4 6 Compressor 5 7 flow control 13 8 drive machine 15 9 cooling system 18 10 pressure vessel 21 11 pipeline and auxiliary equipment 24 12 Electrical system 29 13 Instrumentation and Controls 30 14 Shutdown, alarm and signaling devices 32 15 Skid seat 35 16 Paint and finishing 36 17 Inspection and testing 37 18 mark 39 19 Shipping Preparation 40 20 Corrosive gases 42 21 Offshore or marine environment 43 Appendix A (informative) Technical differences between this document and ISO 13631:2002 and their reasons 46 Appendix B (informative) Comparison of ISO 13631:2002 Normative References and Chinese Standards 49 Appendix C (Informative) Data Sheet 54 Appendix D (informative) Repair of gray iron castings or ductile iron castings 68 Appendix E (Normative) Buffer Specifications 69 Appendix F (Informative) Typical Logic Program Diagram 70 Appendix G (Informative) Compliant with GB/T 20972 (All Parts) Compressor Parts 73 Reference 74

foreword

This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting: This document replaces GB/T 25359-2010 "Integrated Skid-Mounted Reciprocating Compressors for the Oil and Gas Industry", and GB/T 25359- Compared with:2010, except for structural adjustment and editorial changes, the main technical changes are as follows: ---Changed the scope, deleted "compressed hydrocarbons" and added "oil-lubricated cylinders" (see Chapter 1, Chapter 1 of the:2010 edition chapter); --- Changed some terms and definitions (see 3:1, 3:2, 3:4, 3:5 and 3:12, 3:1, 3:2, 3:4, 3:5 and 3:12 of the:2010 edition); --- Deleted some terms and definitions (see 3:2:2, 3:3, 3:6, 3:8, 3:9, 3:14 and 3:15 of the:2010 edition); --- Changed the "pattern" requirements (see 5:3, 5:3 of the:2010 edition); --- Added the unit installation condition "with or without foundation" (see 5:6); --- Changed the "torsional vibration analysis" requirements (see 5:7, 5:7 of the:2010 edition); --- Increased "vibration" requirements (see 5:8); --- Added "safety" requirements (see 5:9); --- Increased the "compressor operating power deviation" requirements (see 6:1:5); --- Changed the "allowable speed" requirements (see 6:2, 6:2 of the:2010 edition); --- Added the requirement of "oil-free lubrication of cylinder" (see 6:2, 6:7:3 and 9:3:3); --- Increased "low temperature environment" requirements (see 6:13:4); --- Changed "This standard does not apply to shell-and-tube and plate coolers" to "This document does not include shell-and-tube and plate heat exchangers", and added Added requirements for shell-and-tube and plate heat exchangers (see 9:1, 9:1 of the:2010 edition); ---Changed the "container design standard" to "GB/T 150 and TSG21" (see 10:1:1, 10:1:1 of the:2010 edition); --- Added "pilot-operated safety valve shall comply with the provisions of GB/T 28778" (see 11:18:2); --- Changed the piping requirements for "thermometer casing" (see 13:3:3, 13:3:3 of the:2010 edition); ---Delete the "Magnetic Particle Testing" spectrum method (see 17:2:2 of the:2010 edition); --- Deleted the purchaser's checklist (see A:2 and Table A:3 of the:2010 edition): This document is modified to adopt ISO 13631:2002 "Integrated skid-mounted reciprocating compressors for the oil and gas industry": Compared with ISO 13631:2002, this document has made the following structural adjustments: ---6:5:2:3a)~6:5:2:3d) correspond to 6:5:2:3:1~6:5:2:3:4 of ISO 13631:2002; ---Appendix C, Appendix E, Appendix F, Appendix G and Appendix D correspond to Appendix A, Appendix B, Appendix C and Appendix of ISO 13631:2002 D and Appendix E: Compared with ISO 13631:2002, this document has more technical differences, and vertical Single lines (│) are marked: See Appendix A for a list of these technical differences and their causes: The following editorial changes have been made to this document: --- Deleted some terms and definitions (see 3:2:2, 3:3, 3:6, 3:8, 3:9, 3:14 and 3:15 of ISO 13631:2002), and changed numbering of other terms and definitions; --- Added "oil-free lubrication" related tips (see 6:2); --- Modified the "lubricant" selection criteria (see 6:11:1); --- Added the titles of Figure E:1, Figure F:1, Figure F:2 and Figure G:1; ---Deleted "the dot (·) at the beginning of the clause indicating that the purchaser is required to make a decision or provide further information" and "the purchaser's verification pair table"; --- Added Appendix A (informative) "Technical differences between this document and ISO 13631:2002 and their reasons"; --- Added Appendix B (informative) "ISO 13631:2002 Normative References and Chinese Standards": Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents: This document is proposed by China Machinery Industry Federation: This document is under the jurisdiction of the National Compressor Standardization Technical Committee (SAC/TC145): This document is drafted by: Shenyang Blower Group Reciprocating Machine Co:, Ltd:, China Petroleum Group Jichai Power Co:, Ltd: Chengdu Compressor Branch Company, Chongqing Gas Compressor Factory Co:, Ltd: The main drafters of this document: Song Yun, Meng Wenhui, Zhang Jianyun, Qin Feihu, Dong Zhen, Zhu Hailei, Liu Yong, Xiao Qiang, Cheng Yaya, Wang Yuefei, Yang Jin, Zhang Fakui: This document was first published in:2010, and this is the first revision:

Introduction

Users of this document should be aware that further or different requirements may be required for a particular application: This document is not intended to limit the seller to What kind of equipment or engineering solutions are received and selected by the supplier or purchaser for special purposes, especially innovative or developing technologies: in the seller's Where there are alternatives to the purchaser's requirements, the seller should identify any deviations from this document and provide a detailed description: For the effective use of this document and for easy reference to the text, it is advisable to use the data tables in Appendix C: Integrated skid-mounted reciprocating compressors for the oil and gas industry

1 Scope

This document specifies the integrated skid-mounted, oil-free or oil-free cylinder, split or integral reciprocating with drive machine for the oil and gas industry: Requirements for compressor design, materials, manufacturing, inspection and shipment preparation, as well as compliance with procurement specifications, on-site construction and equipment procurement minimum requirements: This document applies to integrated skid-mounted reciprocating compressors and all necessary auxiliary equipment for the oil and gas industry: Note 1: Necessary auxiliary equipment includes: water and gas coolers, mufflers, exhaust emission control equipment, filters, separators, control panels and pipelines, etc: Note 2: These devices are assembled into an operable unit according to the procurement specifications and the requirements for on-site construction and minimum installation equipment: This document does not cover the following equipment: --- Oil-lubricated or oil-free reciprocating compressors (hereinafter referred to as compressors) for oil and gas industry cylinders included in GB/T 20322; --- Compressors installed directly on the foundation; ---Single-acting piston compressor with integrated crosshead and piston (automotive type); --- Air compressors for power or instrumentation with discharge pressure not greater than 0:9MPa; --- Compressors driven by diesel engines, gas turbines and steam turbines:

2 Normative references

The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document: GB/T 150 (all parts) pressure vessels GB/T 151 heat exchanger GB/T 193 Common thread diameter and pitch series (GB/T 193-2003, ISO 261:1998, MOD) GB/T 755 Rating and performance of rotating electrical machines (GB/T 755-2019, IEC 60034-1:2017, IDT) GB/T 1348 Ductile Iron Castings (GB/T 1348-2019, ISO 1083:2018, MOD) GB/T 3098:1 Mechanical properties of fasteners Bolts, screws and studs (GB/T 3098:1-2010, ISO 898-1:2009, MOD) GB/T 3098:2 Mechanical properties of fastener nuts (GB/T 3098:2-2015, ISO 898-2:2012, MOD) GB/T 3098:15 Mechanical properties of fasteners Stainless steel nuts (GB/T 3098:15-2014, ISO 3506-2:2009, MOD) GB/T 3098:25 Mechanical properties of fasteners Selection guide for stainless steel and nickel alloy fasteners GB/T 3836 (all parts) Explosive atmospheres [IEC 60079 (all parts)] Note: See Table B:2 for the degree of consistency between each part of GB/T 3836 (all parts) and IEC 60079 (all parts): GB/T 4208 Enclosure protection level (IP code) (GB/T 4208-2017, IEC 60529:2013, IDT) GB/T 5677 Radiographic testing of castings (GB/T 5677-2018, IEC 4993:2015, MOD) GB/T 6391 Rated dynamic load and rated life of rolling bearings (GB/T 6391-2010, ISO 281:2007, IDT) GB/T 6479 Seamless Steel Tubes for High Pressure Fertilizer Equipment GB/T 7306 (all parts) 55° sealing pipe thread (GB/T 7306:1-2000, GB/T 7306:2-2000, eqvISO 7-1:1994) GB/T 8163 seamless steel pipe for conveying fluid GB/T 9144 Ordinary thread optimization series (GB/T 9144-2003, ISO 262:1998, MOD) GB/T 9439 gray iron castings (GB/T 9439-2010, ISO 185:2005, MOD)

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 25359-2023_English be delivered?

Answer: Upon your order, we will start to translate GB/T 25359-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 6 ~ 9 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 25359-2023_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 25359-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 25359-2023?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 25359-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.