Search result: GB/T 25358-2010
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 25358-2010 | English | 1019 |
Add to Cart
|
7 days [Need to translate]
|
Packaged rotary oil-free air compressors for petroleum and natural gas industries
| Valid |
GB/T 25358-2010
|
| Standard ID | GB/T 25358-2010 (GB/T25358-2010) | | Description (Translated English) | Packaged rotary oil-free air compressors for petroleum and natural gas industries | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J72 | | Classification of International Standard | 23.140 | | Word Count Estimation | 46,485 | | Date of Issue | 2010-11-10 | | Date of Implementation | 2011-03-01 | | Quoted Standard | GB 150; GB 151; GB/T 193; GB/T 196; GB/T 197; GB/T 2624.1; GB/T 3098.1; GB/T 3098.2; GB/T 3098.4; GB/T 3098.6; GB/T 3098.15; GB 3836.1-2000; GB/T 3853; GB/T 4980; GB 5310; GB/T 6391; GB/T 7306.1; GB/T 7306.2; GB/T 8163; GB/T 9112; GB/T 9113; GB/T 9114; GB/T 9115; GB/T 9116; GB/T 9117; GB/T 9118; GB/T 9119; GB/T 9120; GB/T 9121; GB/T 9122; GB/T 9123; GB/T 9124; GB/T 9144; GB 9948; GB/T 10095.2-2008; GB/T 12716; GB/T 14976; GB/T 15386; GB/T 17241; GB 50235; JB/T 4365; JB/T 9559; pressure Vessel safety Technology Supervision | | Adopted Standard | ISO 10440-2-2001 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, China National Standardization Administration Committee | | Summary | This standard specifies the oil refinery with a pressure of not more than 0. 2 MPa helical teeth, torsion leaves and straight blade rotary oil-free air compressor (hereinafter referred to as the compressor) the minimum requirements. It is suitable for continuous operation of the process air (and other inert gases) of the compressor. This standard does not apply to fuel injection rotary compressors. |
GB/T 25358-2010
Packaged rotary oil-free air compressors for petroleum and natural gas industries
ICS 23.140
J72
National Standards of People's Republic of China
Petroleum and natural gas industries
Cartridge-type rotary oil-free air compressor
(ISO 10440-2.2001, Petroleumandnaturalgasindustries-
Part 2. Packagedaircompressors (oil-firee), MOD)
Issued on. 2010-11-10
2011-03-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
Introduction Ⅳ
1 Scope 1
2 Normative references 1
3 Terms and definitions 2
4 Basic Design 4
4.1 General 4
4.2 bearing housing 5
4.3 chassis interface 5
4.4 external force and external moment 6
4.5 rotary member 6
7 4.6 Seal
4.7 Dynamics 7
4.8 bearing 8
4.9 bearing 8
4.10 lubricants and seal oil system 8
4.11 Material 8
Nameplate 9 4.12
5 aids 10
10 5.1 driver
5.2 coupling and shield 10
5.3 The mounting plate 10
11 5.4 Control and instrumentation
Piping and ancillary equipment 12 5.5
6 inspection, testing and preparation for shipment 15
6.1 General 15
6.2 Test 15
6.3 Test 15
6.4 ready for shipment 17
7 18 Vendor Information
7.1 Tender 18
7.2 Contract Information 19
Appendix A (informative) Data Table 21
Appendix B (normative) compressor allows an external force and external force moment 31
Annex C (normative) Permissible residual unbalance 33
Appendix D (Informative Appendix) ISO 10440-2 standard of reference standards and standard table 34
Appendix E (Informative Appendix) ISO 10440-2.2001 technical differences and their causes 38
References 41
Foreword
This revised standard adopts ISO 10440-2.2001 "oil and gas industry rotary displacement compressors - Part 2. Manifold Air
Compressor (oil-free) "(in English).
This standard is based on ISO 10440-2.2001 redrafted and ISO 10440-2.2001 is based on API619, Second Edition, 1992 onwards
Grass.
The standard in the use of international standards for technical content has been modified. These technical differences identified in a single vertical line to which they relate
Terms of margin, technical differences and their causes, see Appendix E, other differences (major content modifications) as follows.
--- Of ISO 10440-2.2001 references other international standards, it has been adopted by our country instead of the standard corresponding to international standards;
--- A unit of measurement instead of legal units of measurement, and removed the brackets imperial units of measurement;
--- Introduction of the latest ISO standards and related content is given in the Appendix;
--- Taking into account the changes made to our country, its technical differences and their reasons are given in the Appendix.
For ease of use, this standard also made the following editorial changes.
--- "This International Standard" be replaced by "this standard";
"." --- With a decimal point instead of a comma as the decimal point, "";
--- Deleted international standards foreword.
The Standard Appendix B, Appendix C are normative appendices, Appendix A, Appendix D, Appendix E is an information appendix.
The standard proposed by China Machinery Industry Federation.
This standard by the National Standardization Technical Committee of the compressor.
This standard is drafted by. Wuxi Compressor Co., Ltd..
Participated in the drafting of this standard. Hefei General Machinery Research Institute, Shanghai Electric Compressor Pump Co., Ltd., Shenyang Blower Works (Group) stocks
Limited copies.
The main drafters of this standard. Jiangshang Hong, Zhu Yu, Tan Meng acquaintance, Wuxia Jun, Chen Fang, Cheng Guangqing, Wu Hui, Wu Feng, Yun Song.
introduction
This standard is based on rotary compressor manufacturers and users of the accumulated knowledge and experience. The goal is to provide a standard technical specifications for later
Fan, facilitate the general oil and gas industry facilities rotary oil-free air compressor manufacturing and purchasing with container type, but its use is not limited to
These facilities.
The purpose of this standard is to provide minimum requirements for design and construction, so that the device is suitable for the required purposes. The standard range limit
Permit system is one of concern, not interests. Energy conservation and environmental protection are increasingly concerned, and in the design, application and operation
There is an important aspect. Equipment manufacturers and users should not give up the premise of safety and reliability, and actively pursue other possible
Improved energy use and minimize the environmental impact of the way. These pathways should fully research, selection and procurement should be increasingly
Based on the cost of the entire budget and the use of environmental impact not only on the purchase cost.
This standard requires the purchaser given the exact details and performance details.
In order to effectively and ease of use of this standard reference text, recommended in Appendix A.
Users of this standard should be aware that for a particular purpose may require further or different requirements. This standard is not intended to limit the sale
Provided by any device or purchaser receives for special purposes, the choice of equipment or engineering solutions. There are at or innovation of technology development,
This may be particularly suitable. Provide replacement equipment, the vendor should determine this deviation from the standard and provide detailed instructions.
Petroleum and natural gas industries
Cartridge-type rotary oil-free air compressor
1 Scope
This standard specifies the oil refinery pressure not more than 0.2MPa helical teeth, twisting leaves and straight blade rotary oil-free air compressor
(Hereinafter referred to as compressor) the minimum requirements, it is suitable for continuous operation in the process of air (and other inert gas) compressor.
This standard does not apply to fuel injection rotary compressors.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB 150 steel pressure vessels
GB 151 shell and tube heat exchangers
GB/T 193 series ordinary thread diameter and pitch (GB/T 193-2003, ISO 261.1998, MOD)
GB/T 196 common thread basic size (GB/T 196-2003, ISO 724.1993, MOD)
GB/T 197 common thread tolerance (GB/T 197-2003, ISO 965-1.1998, MOD)
GB/T 2624.1 with the differential pressure measuring device mounted to round pipe full pipe fluid flow - Part 1. General principles and
Requirements (GB/T 2624.1-2006, ISO 5167-1.2003, IDT)
GB/T 3098.1 Mechanical properties of fasteners Bolts, screws and studs (GB/T 3098.1-2000, ISO 898-1.1999, IDT)
GB/T 3098.2 Mechanical properties of fasteners - Nuts - Coarse thread (GB/T 3098.2-2000, ISO 898-2.1992, IDT)
GB/T 3098.4 Mechanical properties of fasteners fine thread (GB/T 3098.4-2000, ISO 898-6.1994, IDT)
GB/T 3098.6 Mechanical properties of fasteners stainless steel bolts, screws and studs (GB/T 3098.6-2000, ISO 3506-1.
1997, IDT)
GB/T 3098.15 mechanical properties of stainless steel fasteners nuts (GB/T 3098.15-2000, ISO 3506-2.1997, IDT)
GB 3836.1-2000 Electrical equipment for explosive gas atmospheres - Part 1. General requirements (eqv IEC 60079-0.1998)
GB/T 3853 displacement compressors acceptance test (GB/T 3853-1998, eqv ISO 1217.1996)
GB/T 4980 Determination of volumetric compressor noise
GB 5310 high-pressure boiler seamless steel pipe
GB/T 6391 Rolling bearings - Dynamic load ratings and rating life (GB/T 6391-2003, ISO 281.1990, IDT)
GB/T 7306.1 55 ° sealing pipe threads - Part 1. the inner cylindrical thread and taper external thread (GB/T 7306.1-2000,
eqv ISO 7-1.1994)
GB/T 7306.2 55 ° sealing pipe thread Part 2. internal Taper internal and external threads (GB/T 7306.2-2000,
eqv ISO 7-1.1994)
GB/T 8163 fluid seamless steel pipe (GB/T 8163-2008, neqEN10216.2004)
GB/T 9112 ~ 9124 steel pipe flanges
GB/T 9144 common thread preferred series (GB/T 9144-2003, ISO 262.1998, MOD)
GB 9948 oil cracking seamless pipe (GB 9948-2006, ISO 9329-2.1997, MOD)
GB/T 10095.2-2008 Cylindrical gear accuracy system - Part 2. radial composite deviations and runout Definitions and allowable values
......
|