HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB 6675.12-2014 English PDF

US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 6675.12-2014: Safety of toys -- Part 12: Toy scooter
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB 6675.12-2014English279 Add to Cart 3 days [Need to translate] Safety of toys -- Part 12: Toy scooter Valid GB 6675.12-2014

PDF similar to GB 6675.12-2014


Standard similar to GB 6675.12-2014

GB 6675.3   GB 6675.4   GB 6675.2   GB 6675.13   GB 6675.14   GB 6675.11   

Basic data

Standard ID GB 6675.12-2014 (GB6675.12-2014)
Description (Translated English) Safety of toys -- Part 12: Toy scooter
Sector / Industry National Standard
Classification of Chinese Standard Y57
Classification of International Standard 97.200.50
Word Count Estimation 12,196
Date of Issue 12/5/2014
Date of Implementation 1/1/2016
Quoted Standard GB 6675.2-2014; GB 6675.3-2014; GB 6675.4; GB 19865; GB 5296.5; EN 14619
Regulation (derived from) Announcement of Newly Approved National Standards 2014 No. 27
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This Standard specifies the toy scooters - Safety requirements and test methods. This section applies to the design or intended for under 14 years old, weighing less than 50kg of children play toy scooters, including collapsible and non-collapsible two fo

GB 6675.12-2014: Safety of toys -- Part 12: Toy scooter

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Safety of toys.Part 12. Toy scooter ICS 97.200.50 Y57 National Standards of People's Republic of China Safety of toys - Part 12. toy scooters Issued on. 2014-12-05 2016-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB 6675 All technical content of this section is mandatory. GB 6675 toy safety series of standards, including the following sections. --- Basic specification (GB 6675.1); --- General requirements, including but not limited to, move the mechanical and physical properties (GB 6675.2), flammability (GB 6675.3), a particular element Move (GB 6675.4); --- Specific requirements, requirements for specific products. This is Part 12 GB 6675's. This part is a series of toy safety standard toy scooters specific requirements (GB 6675.12), and GB 6675.1, GB 6675.2, GB 6675.3, GB 6675.4, GB 19865 (applicable to electric toys) combination. This section drafted in accordance with GB/T 1.1-2009 given rules. This part is proposed by the China National Light Industry Council. This part of the National Toy Standardization Technical Committee (SAC/TC253) centralized. This section drafted by. China Shanghai Import and Export Toy Inspection Center, Shenzhen CIQ Toy Testing Center, the good girls Child children Ltd., Yangzhou Import and Export Toy Inspection Institute, Guangdong Entry-Exit Inspection and Quarantine Bureau Technology Center Toys Lab, Ningbo Entry-Exit Inspection and Quarantine light industrial products testing center, Zhejiang Institute of Quality and Technical Supervision and Inspection. The main drafters of this section. Wang Jinsong, Yin Lijuan, Fu Xiaomei, Chi ceremony, Chen Lei Ming again, Heat Transfer Enhancement to be flat. Safety of toys - Part 12. toy scooters

1 Scope

GB 6675 of the provisions of this part of the toy scooters - Safety requirements and test methods. This section applies to the design or intended for the age of 14, weighing no more than 50kg of children play toy scooters, including foldable And not fold in two forms. This section does not apply to the design or intended for sports purposes scooters available electrically driven scooters.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB 6675.2-2014 Safety of toys - Part 2. Mechanical and physical properties GB 6675.3-2014 Safety of toys - Part 3. Flammable Properties GB 6675.4 Safety of toys - Part 4. Migration of certain elements GB 19865 electrical safety of toys GB 5296.5 consumer use - Part 5. Toys EN14619 scooters - Safety requirements and test methods

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 Toy scooters toyscooter Scooter is a toy for children weighing less than 50kg use by children through muscle movement driven ride-on toys, including a Folding and non-folding forms. Toy scooters composition comprises the following components. at least one standing surface, at least two wheels, a car Put, an adjustable or fixed-length of the riser. In this section, toy scooters are divided into the following two. --- For children weighing less than 20kg toy scooters; --- For weighing over 20kg but not exceeding 50kg children toy scooters. 3.2 Collapse colapse Sudden and unforeseen structures collapsed. 4. Technical Requirements 4.1 normal Toy scooters shall be tested under the foreseeable conditions of ordinary use, to ensure that in the case of normal wear and tear of the toy, still does not appear Danger. Toy scooters before and after a test shall meet the requirements of Chapter 4. 4.2 reasonably foreseeable misuse After a normal test for intended for children under 96 months of age to use a toy scooters shall GB 6675.2-2014 In 5.24 (reasonably foreseeable abuse tests, except for the first article 5.24.4) conducted abuse testing. Toy before and after a test shall meet the requirements of Chapter 4. 4.3 Material 4.3.1 The quality of materials Visually inspect all materials should be clean, non-polluting. Check the materials should be adopted through normal vision after correction of visual inspection rather than put Inspection. 4.3.2 flammability performance Performance of all flammable materials should be consistent with GB 6675.3-2014 4.1 (General Requirements) requirements. 4.3.3 Migration of certain elements Toy scooters accessible material shall comply with the requirements of GB 6675.4. 4.4 Small Parts Shall comply with GB 4.4 (small parts) requirements 6675.2-2014. 4.5 Edge Shall comply with the 4.6 GB (edge) requirements 6675.2-2014. 4.6 tip Shall comply with the 4.7 GB (tip) requirements 6675.2-2014. 4.7 Outstanding member Toy scooters protruding parts 4.7.1 should be consistent with the 4.8 GB (protruding parts) requirements 6675.2-2014. 4.7.2 toy scooters diameter end of the handle should be not less than 40mm. 4.8 Packaging for toys or plastic bags or plastic film Shall comply with GB 6675.2-2014 4.10 (for packaging toys or plastic bags or plastic film) requirements. 4.9 aperture, the gap, the mechanism can be touched Shall comply with GB 4.13 (holes, gaps, mechanical devices can be touched) requirements 6675.2-2014. This requirement does not apply to brake installed The gap between the opposing friction surfaces. 4.10 spring 4.14 GB shall comply with the (spring) requirements 6675.2-2014. 4.11 Strength 4.11.1 static strength and dynamic strength Toy scooters after following 5.1 (static strength) and 5.2 (dynamic strength) test shall comply with. a) can not produce accessible hazardous sharp edges (see 5.8 GB 6675.2-2014 sharp edge test); b) not accessible hazardous sharp points (see 5.9 GB 6675.2-2014 sharp point test); c) can not be exposed to the fingers and other body parts have squeezed dangerous driving mechanism; d) shall not collapse and not comply with the relevant requirements of this section. 4.11.2 The riser strength Toy scooters in accordance with 5.4 (the riser strength) after the test shall comply with. a) because of the collapse of the riser can not comply with the relevant requirements of this section; b) can not be broken into the riser section 2 or section; c) locking means not damage or failure. 4.12 Stability three scooters If three scooters distance between the centers of the outermost wheels exceeds 150mm, using 50kg load in accordance with GB 6675.2- 2014 5.12.2 (may be stabilizing feet toys lateral stability test) for testing, scooters can not tipping. 4.13 adjustable, foldable handlebar stem and the horizontal pipe 4.13.1 The riser should not be unexpected split. In order to prevent a sudden change in the height, height-adjustable handlebar stem shall comply with the following conditions. a) in order to adjust the tool; b) at least one main locking device and an auxiliary lock means when adjusting the height of which at least one locking device to automatically Effect. 4.13.2 collapsible due to a locking device on the folding mechanism riser. 4.13.3 clearance might pinch fingers moving parts should be. If you can insert rod 5mm should also be inserted into the round bar of 12mm. 4.13.4 may cut fingers moving parts accessible openings should not be inserted into a round rod of 5mm. 4.13.5 the horizontal pipe in accordance with 5.4.3 (the horizontal pipe connection strength) test, the horizontal pipe section should be split into 2 or more pieces. 4.14 Brake 4.14.1 for children weighing less than 20kg toy scooters can not install the braking system. 4.14.2 for weighing over 20kg but not exceeding 50kg children's scooters have at least one in the rear wheel brake system, Brake system should be able to work effectively, smooth deceleration, can not stop. 4.14.3 Press 5.3 (braking performance) test, the toy scooter on the inclined surface of the holding force should be less than 50N. 4.15 Wheel size Toy scooters wheel diameter should be not less than 90mm. 4.16 parts 4.16.1 Toys with functional components Toy scooter with a toy functional components shall meet the requirements of GB 6675.2-2014. 4.16.2 vocal member Toy scooter vocal member shall comply with GB 6675.2-2014 of 4.28 (requires sound) requirements. 4.16.3 Electrical accessories Electrical accessories toy scooter shall meet the requirements of GB 19865. 4.17 identification, warnings and instructions for use 4.17.1 Identification and warning Toy scooters or packaging or instructions for use, shall be marked with the applicable weight range, warning, Warnings and instructions for use. Should mention Parents or guardians awake ride-on toys scooters potentially dangerous (see Appendix A). 4.17.2 Instructions The instructions shall comply with the mandatory provisions of GB 5296.5.

5 Test Methods

5.1 Static strength Load is cylindrical, the diameter of the bottom surface 150 10 0 mm, height 300 10 0 mm, a height of the center of gravity 150 10 0 mm, respectively, by weight (50 ± 0.5) kg and (100 ± 1) kg. In the center of the pedal toy scooters placed load (see Figure 1). Labeled for use by children weighing less than 20kg toy scooters should be used (50 ± 0.5) kg load. Other toy scooters should be used (100 ± 1) kg load. Load holding 5min. Check toy scooter continues to comply with the relevant requirements of this section. Explanation. 1 --- test load. Figure 1 Static strength test 5.2 Dynamic strength 5.2.1 Principle Toys scooter placed load, simulated arm wrist hold down the handle. Operated toys inelastic collision steps three times. then Check toy scooter continues to comply with the relevant requirements of this section. 5.2.2 Load Load as shown in Figure 2, is equipped with two analog arm, a removable cushion with straps. Each analog weight arm (2 ± 0.02) kg. Mat including the weight of the sand and straps for (0.5 ± 0.01) kg. A load weight of (50 ± 0.5) kg, suitable for testing for weight exceeds 20kg ~ 50kg children toy scooters. B load weight of (25 ± 0.2) kg, suitable for testing for children weighing less than 20kg toy scooters. Load plus the weight of two analog arms and cushions for weight 50kg for children with a toy scooters with a rated weight 54.5kg. For weighing less than 20kg for toy scooters for use by children, their nominal weight of 29.5kg. Each element simulation ends of the arm is equipped with symmetrical spherical joint, so that the arm capable of moving in all directions. "Elbow" joint movement in one direction and can be locked, "wrist" joint movement in both directions and can be locked. The end of the arm Equipped jig enables the arm fixed to the toy. Millimeters a) Load A b) Load B Specifications dynamic strength test load part weight kg diameter mm height mm a 10.42 150 ± 2 75 ± 2 b 14.58 178 ± 2 75 ± 2 c 4.16 - 150 ± 2 D (each) 2.00 e 0.50 (maximum) 40 (max) Explanation. 1 --- the center of gravity; 2 --- spherical joint; 3 --- way joints; 4 --- two-way joint; 5 --- jig; a, b, c --- weight block; d --- simulation arm; e --- with strap pad (removable). Figure 2 dynamic strength test load 5.2.3 Test Procedure Use weight (4.8 ± 0.2) kg, height of (250 ± 25) mm of pad, standing face toy with the appropriate load, the load Location placed approximately at the position of normal use of the toy, the center of gravity of the load opposite the standing surface height of 400mm. With a rope load solid Given the toy. Simulation on the clamp arm is fixed in the direction of the pipe or wheel toys, roughly in line with the position of normal use position, elbow and wrist Joint lock. Toy scooters to (2 ± 0.2) speed stable m/s vertical impact height (50 ± 2) mm inelastic step three times. In the event After impact should Diaozhu load to prevent it from falling and to produce independent toy scooters damage. Note 1. When setting up a test device, pay attention to the safety of the operation 50kg weight. Note 2. In order to protect the personal safety Diaozhu load and test personnel, it is recommended the load is connected with a rope, the other end of the rope attached to the highline or similar device. Note 3. The toys can be used to define the device so as to impinge on the inelastic vertical steps. Note 4. The test may be used in toys and balancing device to ensure the load in a vertical position. If the toy scooters in use, capable of carrying more than one child at the same time, while the test each standing surface. 5.3 braking performance 5.3.1 with the handbrake toy scooters Use weight (4.8 ± 0.2) kg, height of (250 ± 25) mm of spacers in the toy scooter loaded 5.2.2 (50 ± 0.5) kg load center of gravity height above the pedal 400mm. Analog arm fixed to the tube, is placed on the inclined surface (10 ± 1) °, the oblique Working surface layer of abrasive paper (aluminum oxide P60), the horizontal axis parallel to the slope. Handbrake lever in the neutral position is applied perpendicular (30 ± 2) N of force. Use dynamometer, measuring the direction parallel to the slope. Toy scooters measurements will remain on the slope of the force is less than 50N. 5.3.2 with foot brake toy scooters Use weight (4.8 ± 0.2) kg, height of (250 ± 25) mm of spacers in the toy scooter loaded 5.2.2 (25 ± 0.2) kg load center of gravity height above the pedal 400mm. Analog arm fixed to the tube, is placed on the inclined surface (10 ± 1) °, the oblique Working surface a layer of abrasive paper (aluminum oxide P60), and the inclined surface parallel to the horizontal axis (see FIG. 3). Applied perpendicular (20 ± 1) in the middle of the foot brake lever kg Force. Use dynamometer, measuring the direction parallel to the slope. Toy scooters measurements will remain on the slope of the force is less than 50N. Explanation. 1 --- test load, 25kg, and simulation arm; 2 --- dynamometer; 3 --- test load, 20kg; 4 --- pad and counterweight, height (250 ± 25) mm, weight (4.8 ± 0.2) kg. Brake performance test 3 with foot brake toy scooters 5.4 riser strength 5.4.1 anti downward force The toy scooter on a level surface, which is fixed to remain vertical during the test. Check the locking device is working properly. a) If there are two handles, then applied (50 ± 0.5) kg load (see FIG. 4A)) in the middle of each handle position, remain 5min. Check whether the collapse of the riser, the locking mechanism whether normal operation and still effective. Then remove 50kg load. Loosen the lock master Setting means, so that the auxiliary lock device continues to work, applying (25 ± 0.2) on each handle kg of force maintain 5min. Check the secondary lock Given device is still operating normally and effectively. If it is not clear which is the main locking device, it is assumed that each of the locking devices are It is the primary locking device, and then click Test. a) a handle of the riser Anti-down Test b) without the handle riser Anti-down Test c) Anti-up Test Explanation. 1 --- test load; 2 --- gantry. Figure 4 riser test b) If the riser not handle, then a) when tested in accordance with the load, respectively (100 ± 1) kg and (50 ± 0.5) kg, action In the top of the riser [see Fig. 4b)]. 5.4.2 anti upward force Toy scooters down vertically fixed gantry [see Fig. 4c)]. Check the locking device is working properly. a) For handle 2 is applied (25 ± 0.2) kg on each handle the load and keep 5min. b) For the no handle on the risers, in applying the riser top (50 ± 0.5) kg load and keep 5min. Check whether the riser is pulled down, the lock if the device is still operating normally and effectively. 5.4.3 the horizontal pipe connection strength In the horizontal pipe ends in the opposite direction is applied (90 ± 5) N of force maintain 5min. Check whether the horizontal pipe separated. NOTE. When you need to dismantle the sets tested.

Appendix A

(Informative) Security identity guidelines For children weighing less than 20kg toy scooters should be marked. "Maximum load 20kg." For children weighing less than 50kg toy scooters should be marked. "Maximum load 50kg." In addition, the packaging (if any) and should contain instructions on the following warning. "Warning Wear protective equipment. Does not apply to the weight exceeds (or 50kg) 20kg of children. " Instructions for use should be reminded. the use of toy scooter requires a large skill, toy scooters should be used with caution in order to prevent the fall and hit Wounded and users and third parties. If appropriate, the instructions for use shall contain the following information. --- Above warning; --- How to safely fold and unfold foldable scooters; --- Must be noted that the locking mechanism to work; --- Danger on the road use; --- Recommend use of protective equipment, such as helmets, gloves, knee pads and elbow pads.

Appendix B

(Informative) Additional information The average weight of 5-year-olds is about 20kg. The average weight of children aged 14 to 50kg. As a sports equipment scooter safety requirements refer to EN14619. Once considered toy scooters are divided into 2 individual recombinant other, 20kg constituency and roller skates and other products division groups the same. play Higher category with scooters is 50kg. For children under 5 years of age to use a toy scooters do not need to install the brakes, because these toys scooters usually do not run at high speed OK, and children generally do not operate the brakes.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 6675.12-2014_English be delivered?

Answer: Upon your order, we will start to translate GB 6675.12-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 6675.12-2014_English with my colleagues?

Answer: Yes. The purchased PDF of GB 6675.12-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.