Path:
Home >
GB >
Page107 > GB 29386-2012
Home >
Standard_List >
GB >
Page107 > GB 29386-2012
US$239.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 29386-2012: [GB/T 29386-2012] Deltamethrin emulsifiable concentrates
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB 29386-2012 | English | 239 |
Add to Cart
|
3 days [Need to translate]
|
[GB/T 29386-2012] Deltamethrin emulsifiable concentrates
| Valid |
GB 29386-2012
|
PDF similar to GB 29386-2012
Basic data
| Standard ID | GB 29386-2012 (GB29386-2012) |
| Description (Translated English) | [GB/T 29386-2012] Deltamethrin emulsifiable concentrates |
| Sector / Industry | National Standard |
| Classification of Chinese Standard | G25 |
| Classification of International Standard | 65.100.10 |
| Word Count Estimation | 9,946 |
| Quoted Standard | GB/T 1600; GB/T 1601; GB/T 1603; GB/T 1604; GB/T 1605-2001; GB/T 4472-1984; GB 4838; GB/T 6682-2008; GB/T 8170-2008; GB/T 19136; GB/T 19137 |
| Adopted Standard | 2005/333/EC, MOD |
| Regulation (derived from) | National Standards Bulletin No. 42 of 2012 |
| Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China |
| Summary | This Chinese standard specifies the deltamethrin EC's requirements, test methods and marking, labeling, packaging, storage and warranty. This standard applies to the original drug with Deltamethrin emulsifier dissolved in a suitable solvent mixture of the |
GB 29386-2012: [GB/T 29386-2012] Deltamethrin emulsifiable concentrates
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Deltamethrin emulsifiable concentrates
ICS 65.100.10
G25
National Standards of People's Republic of China
Deltamethrin
Published 2012-12-31
2013-07-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China issued
Foreword
This standard in Chapter 3, Section 5 is mandatory, the rest are recommended.
This standard was drafted in accordance with rules GB/T 1.1-2009 given.
This draft standard method using the reformed modified using FAO Specifications 333/EC (May2005) "Deltamethrin."
This standard and FAO specification "Deltamethrin" The main technical differences and reasons.
--- This standard is to control the moisture content ≤1.0%, FAO specifications not control the indicators, EC water is too high, it will affect product quality
The amount should be controlled;
--- the FAO controlling the pH range of 4.5 to 7.5, the standard control pH range 4.0 to 7.0. Deltamethrin in neutral and weakly acidic
Medium stable;
--- FAO specifications lasting foam control amount ≤50mL (after 1min), this standard does not control the indicators. EC lasting domestic product
A small amount of foam, does not affect the product.
Please note that some of the content of this document may involve patents, the issuing authority of this document does not assume responsibility for identifying these patents.
The standard proposed by China Petroleum and Chemical Industry Federation.
This standard by the National Pesticide Standardization Technical Committee (SAC/TC133).
This standard is drafted. Shenyang Chemical Research Institute Co., Ltd.
Participated in the drafting. Bayer CropScience Co., Ltd., Yangzhou Agricultural Chemical Corporation.
The main drafters. Meibao Gui, Xing Hong, Li Na, monthly E, Liu Weirong.
Deltamethrin
1 Scope
This standard specifies the requirements deltamethrin EC, test methods and marking, labeling, packaging, storage and warranty.
This standard applies to the formulated in a suitable solvent Deltamethrin the drug and the deltamethrin dissolved emulsifiers.
Note. The other name, structural formula and basic physicochemical parameters of deltamethrin see Appendix A.
2 Normative references
The following documents for the application of this document is essential. For dated references, only applies to the version dated paper
Pieces. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 1600 Pesticide Method Moisture
Determination 1601 pH value pesticides GB/T
GB/T 1603 Determination of emulsion stability of pesticide
GB/T 1604 pesticide regulations for acceptance of goods
GB/T 1605-2001 sampling commercial pesticides
GB/T 4472-1984 Chemical density, relative density General
GB 4838 EC pesticide packaging
GB/T 6682-2008 analytical laboratory use specifications and test methods (ISO 3696. 1987, MOD)
GB/T 8170-2008 rounding off means about rules and determining limiting values
GB T 19136 Determination of heat storage stability of pesticide /
GB/T 19137 Pesticide low temperature stability determination
3.1 Composition and appearance
This product shall be made deltamethrin standard original drug, a stable homogeneous liquid, no visible precipitate or suspension.
3.2 Technical Specifications
Deltamethrin EC should also meet the requirements of Table 1.
Table 1 deltamethrin EC Control Project Index
project
index
25g/L 50g/L
Deltamethrin mass fraction a /%
Deltamethrin or mass concentration (20 ℃) / (g/L)
2.8 0.3-0.3
253-3
5.0 0.5-0.5
505-5
Moisture content /% ≤ 1.0
TABLE 1 (cont.)
project
index
25g/L 50g/L
The pH range of 4.0 to 7.0
Emulsion stability (200-fold dilution) Eligible
Low temperature stability Qualified b
B qualified thermal storage stability
Mass fraction measurement results to arbitration when a dispute occurred when the quality.
B When normal production, low temperature stability test, the thermal storage stability test was measured at least once every three months.
Test Method 4
Safety Tips. to use this standard shall have practical experience of laboratory work. This standard does not indicate any safety issues. Make
With those who have the responsibility to take appropriate safety and health practices and to ensure compliance with the provisions of relevant state laws and regulations.
4.1 General provisions
This standard reagent in the absence of water and other requirements stated, refer to three predetermined analytical reagents and GB/T 6682-2008 of
water. The test results performed by determining 4.3.3 rounding value in comparison 8170-2008 GB/T .
4.2 Sampling
Carried out in GB/T 1605-2001 of "liquid formulation sampling" approach. Determined by sampling a random number table method packages, the amount of the final sample
Not less than 200mL.
4.3 Identification Test
HPLC --- This identification test can be carried out simultaneously with the determination of the content of deltamethrin. Chromatography under the same operating conditions,
Deltamethrin peaks in the sample solution for a retention time of peaks and the retention time of the standard solution, the relative difference of 1.5% should be
Or less.
4.4 Determination of the mass fraction of deltamethrin
4.4.1 Method summary
Sample dissolved in mobile phase, isooctane dioxane as the mobile phase, used as a filler ZorbaxRX-Si1 stainless steel column and purple
Outer detector (254nm), deltamethrin sample of normal phase high performance liquid chromatography, external standard.
4.4.2 Reagents and solutions
Iso-octane;
Dioxane;
Deltamethrin Sample. deltamethrin known mass fraction, w≥99.0%.
4.4.3 Instruments
HPLC. a variable wavelength UV detector;
Chromatographic data processor;
Column. 250mm × 4.6mm (id) stainless steel column, built ZorbaxRX-Si1,5μm filler;
Filter. membrane pore size of about 0.45 m;
Microsyringe. 50μL;
Quantitative sampling tube. 10μL;
Ultrasonic cleaning.
4.4.4 HPLC operating conditions
Mobile phase. [Psi] (isooctane. dioxane) = 90.10, by membrane filtration, and degassing;
Flow rate. 1.0mL/min;
Column temperature. room temperature;
Detection wavelength. 254nm;
Injection volume. 10μL;
Retention time. deltamethrin about 5.4min.
Are typical operating parameters of the above, according to the characteristics of different instruments, for a given operating parameters appropriately adjusted to obtain the best result.
Deltamethrin typical normal phase HPLC is shown in Figure 1.
1 --- deltamethrin;
2 --- solvent.
Normal phase HPLC Deltamethrin 1 of FIG.
4.4.5 Determination Step
4.4.5.1 Preparation of standard solution
Sample Weigh 0.05 g of deltamethrin (accurate to 0.0002g), was placed in a 50mL volumetric flask, add the mobile phase is shaken to dissolve, stream
The mobile phase was diluted to the mark.
4.4.5.2 Preparation of sample solution
Weigh 0.05g of deltamethrin-containing sample (accurate to 0.0002g), was placed in a 50mL volumetric flask, dilute to the mark with the mobile phase,
Shake well.
4.4.5.3 Determination
Under the above operating conditions, after the instrument is stable, the number of consecutive doses of the standard solution is injected until the peak area of the adjacent two pins is relatively deltamethrin
After less than 1.2% of, measured according to the standard solution, sample solution, the sample solution, the order of standard solution.
4.4.6 computing
The two needle and the sample solution was measured before and after the two doses of the standard sample solution and peak areas were averaged deltamethrin. Sample Deltamethrin
Permethrin mass fraction calculated according to formula (1), the concentration of deltamethrin according to formula (2).
w1 =
A2 · m1 · w
A1 · m2
(1)
ρ1 =
A2 · m1 · ρ · w × 10
A1 · m2
(2)
Where.
W1 --- deltamethrin sample content, expressed in%;
A2 --- sample solution, deltamethrin average peak area;
M1 --- Sample mass in grams (G);
W --- Sample mass fraction deltamethrin, expressed in%;
A1 --- the standard solution, the average peak area deltamethrin;
--- M2 mass of sample, grams (G);
rho] 1 --- deltamethrin sample concentration in grams per liter (g/L);
When the density of the sample ρ --- 20 ℃, in units of grams per milliliter (g/mL) (according to GB/T 4472-1984 of "densitometer method"
Determination).
4.4.7 allows poor
Deltamethrin relatively poor mass fraction (mass concentration) of the two parallel measurement result should be less than 4%, measured as the arithmetic mean
Given result.
4.5 Determination of moisture content
According to GB/T 1600 in the "Karl Fischer method".
4.6 pH value measured
Carried out in GB/T 1601.
4.7 Emulsion stability test
Standard hard water sample was diluted 200-fold, tested in accordance with GB/T 1603, no floating oil (paste) in a measuring cylinder, and precipitation of heavy oil
qualified.
4.8 Low temperature stability test
According to GB/T 19137 of "emulsions and a homogeneous liquid formulation" for the volume of the bottom of the educts 0.3mL centrifuge tube does not exceed qualified.
Thermal storage stability test 4.9
According to GB/T 19136 of "liquid formulation" performed. After the heat storage, deltamethrin content should be greater than the measured mass deltamethrin Prestorage
Fraction of 97%, the emulsion stability should still meet the standards.
4.10 product inspection and acceptance
Shall comply with the provisions of GB/T 1604's.
5 marking, labeling, packaging, storage, security and guarantee period
5.1 marking, labeling, packaging
Deltamethrin EC mark, labeling and packaging should comply with the provisions of GB 4838; Deltamethrin large polyurethane packaging pail,
Barrel net weight of not more than 200kg. Deltamethrin small package polyurethane bottle, bottle net weight 100g (mL), 200g
(ML), 250g (mL), 500g (mL); with outer plastic box or corrugated boxes, each box net content should not exceed 15kg; according to user
Seeking agreement or order take other forms of packaging, subject to the provisions of GB 4838.
5.2 Storage
Deltamethrin package airiness, dry place; storage and transportation, prevent moisture and sunlight, no food, seeds and feed
Feed mix, to avoid contact with the skin, eyes, mouth and nose to prevent inhalation.
5.3 Security
Deltamethrin is moderately toxic pyrethroid insecticides, are in contact with or inhalation of toxic, potentially fatal ingestion, contact with the eye may cause
Pain, skin allergies. FDA should wear protective equipment, wash with soap after application. This product is no specific antidote, mainly thoroughly cleaned
In addition to poisons and symptomatic treatment.
5.4 Warranty Period
Under the provisions of storage and transportation conditions, deltamethrin EC guarantee period, counting from the date of manufacture 2 years.
Appendix A
(Informative)
Deltamethrin other names, structural formulas and physicochemical parameters of the basic
Other names, structural formulas and physicochemical parameters of the product basic active ingredient deltamethrin follows.
ISO common name. deltamethrin
CIPAC Numeric Code. 333
Chemical name. (S) -α- cyano-3-phenoxybenzyl (1R, 3R) -3- (2,2- dibromo-vinyl) -2,2-dimethyl-cyclopropane carboxylate
Structure.
Empirical formula. C22H19Br2NO3
Molecular weight. 505.2
Biological activity. Insecticides
Melting point. 98 ℃ ~ 101 ℃
Vapor pressure (25 ℃). 2.0 × 10-6Pa
Solubility (20 ℃, g/L). water < 2 × 10-6, 450 acetone, methylene chloride 700, 750 cyclohexane, dimethyl formamide
450, dioxane 900
Stability. light, heat stable, stable in neutral and acidic media, easy to decompose under basic conditions.
Tips & Frequently Asked Questions:
Question 1: How long will the true-PDF of GB 29386-2012_English be delivered?
Answer: Upon your order, we will start to translate GB 29386-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.
Question 2: Can I share the purchased PDF of GB 29386-2012_English with my colleagues?
Answer: Yes. The purchased PDF of GB 29386-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.
Question 3: Does the price include tax/VAT?
Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs):
List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?
Answer: Yes. If you need your currency to be printed on the invoice, please write an email to
[email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.