Path: Home > GB > Page107 > GB 29380-2012 || Home > Standard_List > GB > Page107 > GB 29380-2012 Price & DeliveryUS$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 29380-2012: [GB/T 29380-2012] Tetramethrin technical material
Status: Valid
| Std ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status |
| GB 29380-2012 | English | 259 |
Add to Cart
|
3 days [Need to translate]
|
[GB/T 29380-2012] Tetramethrin technical material
| Valid |
Basic data | Standard ID | GB 29380-2012 (GB29380-2012) | | Description (Translated English) | [GB/T 29380-2012] Tetramethrin technical material | | Sector / Industry | National Standard | | Classification of Chinese Standard | G25 | | Classification of International Standard | 65.100.10 | | Word Count Estimation | 10,166 | | Quoted Standard | GB/T 601; GB/T 1604; GB/T 1605-2001; GB 3796; GB/T 6682-2008; GB/T 8170-2008; GB/T 19138 | | Regulation (derived from) | National Standards Bulletin No. 42 of 2012 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Chinese standard specifies the requirements for the original drug tetramethrin, test methods and marking, labeling, packaging, storage and acceptance period. This standard applies to tetramethrin and impurities generated in the production of tetramet | GB 29380-2012: [GB/T 29380-2012] Tetramethrin technical material---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Tetramethrin technical material
ICS 65.100.10
G25
National Standards of People's Republic of China
Tetramethrin original drug
Published 2012-12-31
2013-07-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China issued
Foreword
This standard in Chapter 3, Section 5 is mandatory, the rest are recommended.
This standard was drafted in accordance with rules GB/T 1.1-2009 given.
Please note that some of the content of this document may involve patents, the issuing authority of this document does not assume responsibility for identifying these patents.
The standard proposed by China Petroleum and Chemical Industry Federation.
This standard by the National Pesticide Standardization Technical Committee (SAC/TC133).
This standard is drafted. Yangzhou Agricultural Chemical Corporation.
Participated in the drafting of this standard. Zhongshan Kai Co., Ltd. in Guangzhou Liby Enterprise Group Co., Ltd.
The main drafters of this standard. Liu Weirong, Huang Jin, Lin Bin, Ruan Shen, Yang Zuoyi.
Tetramethrin original drug
1 Scope
This standard specifies the requirements of the original drug tetramethrin, Test Method for marking, labeling, packaging, storage, and acceptance period.
This standard applies to tetramethrin impurities derived from the original drug tetramethrin and production thereof.
Note. Other names, structural formulas and physicochemical parameters of the basic tetramethrin see Appendix A.
2 Normative references
The following documents for the application of this document is essential. For dated references, only applies to the version dated paper
Pieces. For undated references, the latest edition (including any amendments) applies to this document.
Preparation GB/T 601 standard titration solution Chemicals
GB/T 1604 pesticide regulations for acceptance of goods
GB/T 1605-2001 sampling commercial pesticides
GB 3796 pesticide packaging General
GB/T 6682-2008 analytical laboratory use specifications and test methods (ISO 3696. 1987, MOD)
GB/T 8170-2008 rounding off means about rules and determining limiting values
GB/T 19138 Determination of acetone insoluble pesticide
3.1 Composition and appearance
This product should tetramethrin production and related impurities, as a white to pale yellow powder-like or small.
3.2 Technical Specifications
Tetramethrin original drug shall comply with the requirements in Table 1.
Table 1 tetramethrin original drug control project indicators
Item Index
Tetramethrin mass fraction /% ≥ 92.0
Cis-isomer/trans-isomer (20 ± 5)/(80 ± 5)
Acidity (H2SO4 basis) /% ≤ 0.2
Drying loss mass fraction /% ≤ 0.5
Acetone insoluble mass fraction /% ≤ 0.2
Test Method 4
4.1 General provisions
This standard reagent in the absence of water and other requirements stated, refer to three predetermined analytical reagents and GB/T 6682-2008 of
water. The test standard titration solution, in the absence of other requirements specified, and prepared according to GB predetermined calibration/T 601 a. test result
4.3.3 determination performed by the rounding value in comparison 8170-2008 GB/T .
4.2 Sampling
According to GB/T 1605-2001 of "original drug product sampling" method, is determined by random sampling method of the package, a final sample volume should not be
Less than 100g.
4.3 Identification Test
Optionally one of the following methods. When it is not determined by a process should then be determined using another method.
GC --- present identification test can be conducted simultaneously with the determination of the mass fraction of tetramethrin. Under the same chromatographic conditions, the sample solution
Retention time and peak tetramethrin solution of a standard sample peak retention time of the solution, the relative difference should be less than 1.5%.
Infrared spectroscopy --- tetramethrin standard sample and the infrared in the range of 4000cm-1 ~ 400cm-1 absorption spectrum should be no significant
difference. Tetramethrin standard infrared spectra of Figure 1.
1 tetramethrin standard infrared spectrum of FIG.
4.4 Determination of the mass fraction of tetramethrin and cis-trans isomers
4.4.1 Method summary
Sample was dissolved in ethyl acetate, diisooctyl phthalate esters as internal standard, using the DB-210 capillary column and flame ionization detection
Detector, tetramethrin of sample and measured by gas chromatography.
4.4.2 Reagents and solutions
Tetramethrin standard. tetramethrin known mass fraction, w≥98.0%;
Diisooctyl phthalate;
Ethyl acetate;
Internal standard solution. Weigh 0.8g of diisooctyl phthalate, in 100mL volumetric flask, dissolved in ethyl acetate, constant volume,
Shake well.
4.4.3 Instruments
Gas chromatograph. with a hydrogen flame ionization detector;
Chromatographic data processor or chromatography workstation;
Column. 30m × 0.25mm (id) DB-210 fused Shi Ying column, film thickness 0.25μm.
4.4.4 chromatographic operating conditions
Temperature. column compartment 240 ℃, the gasification chamber 250 ℃, the detector chamber 250 ℃;
Gas flow rate. carrier gas (N2) 1.6mL/min, hydrogen 30mL/min, air 400mL/min;
Retention time. about internal standard 3.5min, cis tetramethrin about 4.7min, trans tetramethrin about 5.4min.
Gas chromatography operational conditions described above, a typical system operating parameters; instruments according to different characteristics, for a given operating parameter adjusted as appropriate, in order to
For best results. Typical gas chromatograph tetramethrin parent drug shown in Figure 2.
1 --- internal standard;
2 --- cis-tetramethrin;
3 --- trans tetramethrin.
Fig 2 GC tetramethrin original drug and the internal standard
4.4.5 Determination Step
4.4.5.1 Preparation of standard solution
Sample Weigh 0.08 g of tetramethrin (accurate to 0.0002g), in 15mL clean, dry vial was stoppered, was added with a pipette accurately
Internal standard solution 10mL, shake.
4.4.5.2 Preparation of sample solution
Weigh a sample containing 0.08g of tetramethrin (accurate to 0.0002g), in 15mL clean, dry vial stoppered with and 4.4.5.1
With a pipette in exact 10mL was added to the standard solution, shake.
4.4.5.3 Determination
Under the above operating conditions, after the instrument is stable, the number of consecutive doses of the standard solution is injected until the two needles tetramethrin adjacent peak area relative change
After less than 1.2%, measured according to the standard solution, sample solution, the sample solution, the order of standard solution.
4.4.5.4 computing
The two needle and the sample solution was measured before and after the two doses of the standard sample solution tetramethrin and internal standard peak areas were averaged. Sample
The mass fraction of tetramethrin by formula (1).
w1 = r2 × m1 × wr1 × m2
(1)
Where.
W1 --- tetramethrin sample content, expressed in%;
r1 --- standard solution of cis, trans tetramethrin average peak area and the internal standard peak area ratio;
R2 --- cis sample solution, and an average value of the peak area of the internal standard peak area trans tetramethrin ratio;
M1 --- tetramethrin standard mass in grams (G);
--- M2 tetramethrin mass of sample, grams (G);
W --- tetramethrin standard samples tetramethrin content, expressed in%.
4.4.5.5 Determination of the cis-isomer/trans-isomer
Determination of the mass fraction determination of tetramethrin and cis-isomer/trans-isomer simultaneously.
The proportion of cis isomer/trans-isomer α is calculated according to formula (2).
α = A1
/ (A1 A2)
A2/(A1 A2)
(2)
Where.
A1 --- cis tetramethrin peak area in the sample solution;
A2 --- peak area of sample solution of trans-tetramethrin.
4.4.5.6 allow poor
Results measured by a differential mass fraction tetramethrin two parallel, should not exceed 1.2%, and the arithmetic mean value as a measurement result.
4.5 Determination of acidity
4.5.1 Reagents and solutions
Ethanol;
Sodium hydroxide standard titration solution. c (NaOH) = 0.01mol/L;
Methyl red. 1g/L ethanol solution;
Bromocresol Green. 1g/L ethanol solution;
Mixed indicator. methyl red ethanol solution of 2mL and 10mL bromocresol green ethanol solution, mix well.
4.5.2 Procedure
2g sample was weighed (accurate to 0.0002g), placed in 250mL Erlenmeyer flask, absolute ethanol was added 50mL, shaking the sample
Dissolving; 6 drops of mixed indicator solution was added, with 0.01mol/L sodium hydroxide standard titration solution titration, the solution changed from red to green as the end point;
At the same time as the blank determination.
4.5.3 computing
Acidity w2 of the sample (in terms H2SO4), according to equation (3) is calculated.
w2 = c ×
(V1-V0) × M
1000m × 100
(3)
Where.
--- acidity content w2 of the sample, expressed in%;
C --- sodium hydroxide concentration standard titration solution in units of moles per liter (mol/L);
Vl --- titration of the sample solution of sodium hydroxide consumption standard titration solution volume in milliliters (mL);
V0 titrate blank solution --- standard titration solution of sodium hydroxide consumption volume in milliliters (mL);
--- m sample mass in grams (G);
--- numerical molar mass M sulfuric acid, in units of grams per mole (g/moL), M 12H2SO
÷ 4
êê
úú = 49.04.
4.6 Determination of loss on drying
4.6.1 Instruments
Oven. 50 ℃ ± 2 ℃;
Weighing bottle. an inner diameter of 70mm, 40mm high;
Dryer.
4.6.2 Determination Step
The weighing bottle placed in an oven bake IH, placed in a desiccator taken cooled to room temperature, weigh (accurate to 0.0002g). Repeating the above steps
Step, until a constant weight weighing bottle. 2g sample was placed in the bottle, paving, weighed (accurate to 0.01g), the weighing bottle placed in an oven, without
After the lid, bake 2h, removed and placed in a desiccator to cool to room temperature, weigh (accurate to 0.0002g).
4.6.3 computing
The mass fraction of the sample weight loss by drying of formula (4) is calculated.
w3 = m1-m2m × 100
(4)
Where.
W3 --- drying loss mass fraction of the sample, expressed in%;
M1 --- sample mass before drying and weighing bottles in grams (G);
--- M2 sample mass after drying and weighing bottles in grams (G);
--- m sample mass, in grams (g).
4.6.4 allows poor
The measurement results of the two parallel relative deviation should not exceed 30%; and the arithmetic mean as a measurement result.
4.7 Determination of acetone insolubles
According to GB/T 19138 carried out.
4.8 product testing and acceptance
Shall comply with the provisions of GB/T 1604's.
5 marking, labeling, packaging, storage, security and acceptance of
5.1 marking, labeling, packaging
Tetramethrin original drug marker, label, package should meet the requirements of GB 3796; tetramethrin original drug application opening drum lined with double plastic
Bag, generally barrel net weight 20kg; ordering protocol according to user requirements or other forms of packaging may be employed, subject to GB 3796
Provisions.
5.2 Storage
Tetramethrin original drug package airiness, dry place; storage and transportation, prevent moisture and sunlight, no food, seeds and feed
Mix, to avoid contact with the skin, eyes, mouth and nose to prevent inhalation.
5.3 Security
Tetramethrin low toxicity pyrethroid insecticides, inhalation or contact with toxic average, the FDA should wear protective equipment, after application should
Wash with soap. This product is no specific antidote should be swallowed immediately to the hospital for symptomatic treatment.
5.4 Acceptance of
Tetramethrin original drug acceptance period of one month. From the date of delivery, product quality inspection completed within a month, the indicators should be consistent
standard requirement.
Appendix A
(Informative)
Other names, structural formulas and physicochemical parameters of the basic tetramethrin
Other names, structural formulas and physicochemical parameters of the product substantially tetramethrin active ingredients are as follows.
ISO common name. tetramethrin
CAS Registry Number. 7696-12-0
CIPAC Numeric Code. 322
Chemical Name. cyclohex-1-ene-1,2-dicarboxylic acid imino-methyl (RS) -2,2- dimethyl-3- (2-methyl-prop-1-en-yl) cyclopropanecarboxamide ester
Structure.
Empirical formula. C19H25NO4
Molecular weight. 331.42 (according to 2007 international relative atomic mass)
Biological activity. Insecticides
Vapor pressure (20 ℃). 4.7 × 10-2Pa
Relative density (20 ℃). 1.108
Solubility. Insoluble in water, soluble in xylene, toluene, acetone, ethanol and chloroform.
Stability. stable to heat, light and gradually decomposed at, when alkali and acid decomposition.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 29380-2012_English be delivered?Answer: Upon your order, we will start to translate GB 29380-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB 29380-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB 29380-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |