GB/T 5671-2014 PDF English
Search result: GB/T 5671-2014 English: PDF (GB/T5671-2014)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 5671-2014 | English | 85 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
General purpose lithium lubricating grease for automobile
| Valid |
| GB/T 5671-1995 | English | 199 |
Add to Cart
|
2 days
|
General purpose lithium base grease for automobile
| Obsolete |
| GB 5671-1985 | English | 199 |
Add to Cart
|
2 days
|
Lithium base grease for general purpose automobile
| Obsolete |
PDF Preview: GB/T 5671-2014
GB/T 5671-2014: PDF in English (GBT 5671-2014) GB/T 5671-2014
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 75.100
E 36
Replacing GB/T 5671-1995
General Purpose Lithium
Lubricating Grease for Automobile
ISSUED ON. FEBRUARY 19, 2014
IMPLEMENTED ON. JUNE 1, 2014
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative References ... 5
3 Classification and Mark ... 6
4 Requirements and Test Methods ... 6
5 Inspection Rules ... 7
6 Marking, Package, Transportation and Storage ... 8
Foreword
This Standard was drafted as per the rules specified in GB/T 1.1-2009.
This Standard replaced GB/T 5671-1995 General Purpose Lithium Base Grease for
Automobile.
Compared with GB/T 5671-1995, this Standard has the major changes as follows.
--- Delete “electric generator” in the application scope;
--- Add the low temperature torque index; and delete the similar viscosity index;
--- In the impurity items; change the number of particles with diameter10µm above
from the original no greater than 5000 pieces/cm3 into no greater than 2000
pieces/cm3; change the number of particles with diameter 25µm above from the
original no greater than 3000 pieces/cm3 into no greater than 1000 pieces/cm3;
change the number of particles with diameter 75µm above from the original no
greater than 500 pieces/cm3 into no greater than 200 pieces/cm3;
--- Express the anticorrosive property according to the result expressing mode
stipulated in the newly revised GB/T 5018, changing from the original “no more
than Grade-1” into “qualified”;
--- Add the No.3 consistency grades and technical indicators for the No.3 general
purpose lithium lubricating grease for automobile;
--- Add Chapter 3 Classification and Marking;
--- Add Chapter 5 Inspection Rules.
This Standard is not equivalent to the Japanese Industrial Standard JIS K2220-2003
Class-1 Lubricating Grease for Automobile Wheel Bearing in the aspect of consistency
degree.
This Standard was proposed by National Technical Committee for Standardization of
Petroleum Products and Lubricants (SAC TC/280).
This Standard shall be under the jurisdiction of Petroleum Products and Lubricants
Subcommittee of National Technical Committee for Standardization of Petroleum
Products and Lubricants (SAC TC/280/SC 1).
Drafting organization of this Standard. Sinopec petrochemical research institute.
Chief drafting staffs of this Standard. Jiang Liang, and Liu Zhongqi.
The historical editions replaced by this Standard are as follows.
General Purpose Lithium
Lubricating Grease for Automobile
1 Scope
This Standard specifies the classification and mark, requirements and test methods,
inspection rules, marking, package, transportation and storage of the general purpose
lithium lubricating grease for automobile.
This Standard is applicable to the lubricating grease made by adding antioxidant and
antirust additives into the fatty acid lithium soap thick mineral base oil.
Products conforming to this Standard are applicable to the lubrication of friction parts
such as automobile hub bearings, chassis and water pumps operating at the working
temperature ranging from -30°C~120°C.
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this document.
GB/T 269 Lubricating Grease and Petrolatum – Determination of Cone
Penetration
GB/T 4929 Lubricating Grease – Determination of Dropping Point
GB/T 5018 Standard Test Method for Corrosion Preventive Properties of
Lubricating Greases
GB/T 7325 Petroleum Products – Lubricating Greases and oils – Determination of
Evaporation Loss
GB/T 7326 Lubricating Grease – Corrosiveness to Copper – Copper Strip Test
SH/T 0109 Petroleum Products and Lubricants – Determination of Water Washout
Characteristics of Lubricating Greases
SH 0164 Petroleum Products – Package, Storage, Transportation, Delivery and
Acceptance Rules
SH/T 0229 Method for Sampling Solid and Semi-Solid Petroleum Products
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|