|
Std ID |
Description (Standard Title) |
|
YY/T 1007-2018
|
Vertical steam sterilizers
|
|
YY/T 1612-2018
|
Quality test method of steam in medical sterilization process
|
|
YY/T 1613-2018
|
Requirements for process characterization and control in radiation sterilization of medical devices
|
|
YY/T 1623-2018
|
Test method of effectiveness of sterilization process for reusable medical devices
|
|
YY/T 0734.1-2018
|
Washer-disinfectors. Part 1: General requirements and tests
|
|
YY/T 0734.2-2018
|
Washer-disinfectors - Part 2: Washer-disinfectors employing thermal disinfection for surgical instruments, anaestetic equipment, etc. Requirements and tests
|
|
YY/T 0734.3-2018
|
Washer-disinfector - Part 3: Washer-disinfectors employing thermal disinfection for human waste containers - Requirements and tests
|
|
YY/T 1403-2017
|
Requirements of contract sterilization using ethylene oxide
|
|
YY/T 1544-2017
|
Ethylene oxide sterilization safety and effectiveness basic supply requirements
|
|
YY 0503-2016
|
Ethylene oxide sterilizer
|
|
YY 0504-2016
|
Portable mode steam sterilizers
|
|
YY 0992-2016
|
Endoscopic washing station
|
|
YY 1275-2016
|
Dry heat (heated air) sterilizers
|
|
YY 1276-2016
|
(Development, validation and routine control requirements for dry heat sterilization of medical devices)
|
|
YY 1277-2016
|
Steam sterilizer - Performance requirements of biosafety
|
|
YY/T 0215-2016
|
Ozone disinfector for medical purpose
|
|
YY/T 0567.7-2016
|
Aseptic processing of health care products--Part 7: Alternative processes for medical devices and combination products
|
|
YY/T 0679-2016
|
Low temperature steam and formaldehyde sterilizers for medical purposes
|
|
YY/T 0734.4-2016
|
Washer-disinfectors. Part 4: Requirements and tests for washer-disinfectors employing thermal disinfection for non-invasive medical devices, etc.
|
|
YY/T 1276-2016
|
Requirements for the development, validation and routine control of dry heat sterilization process for medical devices
|
|
YY/T 1309-2016
|
Washer-disinfectors. Requirement and test of ultrasonic wash
|
|
YY/T 1402-2016
|
Test method to demonstrate the suitability of the process challenge device(PCD) during steam sterilization
|
|
YY/T 1463-2016
|
Sterilization validation of medical device. Guidance on selecting a microbial challenge and inoculation sites
|
|
YY/T 1464-2016
|
Sterilization of medical devices. Requirements for the development, validation and routine control of a low temperature steam and formaldehyde sterilization process for medical devices
|
|
YY/T 1478-2016
|
Traceability information of disinfection and sterilization reusable medical devices
|
|
YY/T 1479-2016
|
Sterility test method for membrane filters
|
|
YY/T 1495-2016
|
Microbiological test method for demonstrating cleaning and disinfecting efficacy
|
|
YY/T 0992-2016
|
Endoscopic washing station
|
|
YY/T 0646-2015
|
Small steam sterilizers - Automatic type
|
|
YY/T 1263-2015
|
Evaluation of materials of medical device subject to dry heat sterilization
|
|
YY/T 1264-2015
|
Evaluation of materials of medical device subject to ozone sterilization
|
|
YY/T 1265-2015
|
Evaluation of materials of medical device subject to moist heat sterilization
|
|
YY/T 1266-2015
|
Evaluation of materials of medical device subject to hydrogen peroxide sterilization
|
|
YY/T 1267-2015
|
Evaluation of materials of medical device subject to ethylene oxide sterilization
|
|
YY/T 1268-2015
|
Product adoption and process equivalence for ethylene oxide sterilization
|
|
YY/T 1302.1-2015
|
Physical requirements and microbiological performance of ethylene oxide sterilization - Part 1: Physical aspects
|
|
YY/T 1302.2-2015
|
Physical requirements and microbiological performance of ethylene oxide sterilization - Part 2: Microbiological aspects
|
|
YY 0154-2013
|
Spring full lift safety valves on pressure steam sterilizer
|
|
YY/T 0157-2013
|
Spring type release on pressure steam sterilizer
|
|
YY/T 0158-2013
|
Gasket ring on pressure steam sterilizer
|
|
YY/T 0567.1-2013
|
Aseptic processing of health care products. Part 1: General requirements
|
|
YY/T 0883-2013
|
Specification of process challenge devices and indicator systems for steam penetration testing
|
|
YY/T 0884-2013
|
Evaluation of materials of health care product subject to radiation sterilization
|
|
YY/T 0567.3-2011
|
Aseptic processing of health care products. Part 3: Lyophilization
|
|
YY/T 0567.4-2011
|
Aseptic processing of health care products. Part 4: Clean-in-place technologies
|
|
YY/T 0567.5-2011
|
Aseptic processing of health care products. Part 5: Sterilization in place
|
|
YY/T 0567.6-2011
|
Aseptic processing of health care products. Part 6: Isolator systems
|
|
YY/T 0822-2011
|
Ethylene oxide liquefied gas for sterilization
|
|
YY 0791-2010
|
Steam generators for medical use
|
|
YY 1007-2010
|
Vertical mode steam sterilizers
|
|
YY/T 0802-2010
|
Sterilization of medical devices. Information to be provided by the manufacturer for the processing of resterilizable medical devices
|
|
YY 0731-2009
|
Large steam sterilizers. Manual control type
|
|
YY/T 0084.1-2009
|
Strength calculation and relevant regulations of primary pressure components of cylindrical pressure steam sterilizer
|
|
YY/T 0084.2-2009
|
Strength calculation and relevant regulations of primary pressure containing parts for rectangular pressure steam-heated sterilizer
|
|
YY/T 0734.1-2009
|
Washer-disinfectors. Part 1: General requirements, terms and definitions and tests
|
|
YY/T 0734.2-2009
|
Washer-disinfectors. Part 2: Requirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaestetic equipment, etc
|
|
YY/T 0734.3-2009
|
Washer-disinfector. Part 3: Requirements and tests for washer-disinfectors employing thermal disinfection for human waste containers
|
|
YY 0215-2008
|
Medical ozone disinfecting cabinets
|
|
YY 0646-2008
|
Small steam sterilizers. automatic type
|
|
YY 0679-2008
|
Sterilizers for medical purposes. Low temperature steam and formaldehyde sterilizers
|
|
YY/T 0086-2007
|
Pharmaceutical refrigerator
|
|
YY/T 0168-2007
|
Blood refrigerator
|
|
YY/T 0615.1-2007
|
Requirements for medical devices to be designated “STERILE”. Part 1: Requirements for terminally sterilized medical devices
|
|
YY/T 0615.2-2007
|
Requirements for medical devices to be designated “STERILE”. Part 2: Requirements for aseptically processed medical devices
|
|
YY 0154-2005
|
Spring type safety valve on pressure steam sterilizer
|
|
YY 0503-2005
|
Ethylene oxide sterilizer
|
|
YY 0504-2005
|
Portable mode steam sterilizers
|
|
YY 1007-2005
|
Vertical mode steam sterilizers
|
|
YY/T 0157-2005
|
Spring type release on pressure steam sterilizer
|
|
YY/T 0158-2005
|
Spring type gasket on pressure steam sterilizer
|
|
YY/T 0159-2005
|
Steam trap fitted on pressure steam sterilizer
|
|
YY/T 0567.1-2005
|
Aseptic processing of health care products - Part 1: General requirements
|
|
YY/T 0567.2-2005
|
Aseptic processing of health care products. Part 2: Filtration
|
|
YY 91006-1999
|
Specifications for portable steam sterilizers
|
|
YY 91007-1999
|
Specifications for vertical and cylindrical steam sterilizers
|
|
YY 91008-1999
|
Specifications for horizontal and cylindrical steam sterilizers
|
|
YY 91009-1999
|
Specifications for horizontal and rectangular steam sterilizers
|
|
YY 91039-1999
|
Particular requirements for the safety of baby incubator
|
|
YY/T 0298-1998
|
General specification for medical oxygen generator with molecular sieve
|
|
YY 0215.1-1995
|
(Electric sterilizer safe disinfection general technical conditions)
|
|
YY 0215.2-1995
|
General technical requirements for safety and disinfection effect of ozone disinfection cabinet
|
|
YY 0154-1994
|
(Pressure steam sterilization equipment with a spring-loaded safety valve)
|
|
YY 0168-1994
|
(Blood Reefer)
|
|
YY/T 0157-1994
|
(Pressure steam sterilization equipment put steam valve spring)
|
|
YY/T 0158-1994
|
(Pressure steam sterilization equipment gasket)
|
|
YY/T 0159-1994
|
(Pressure steam sterilization equipment Traps)
|
|
YY 0085.1-1992
|
Pulse vacuum pressure steam sterilizer
|
|
YY 0085.2-1992
|
Forevacuum pressure steam sterilizer
|
|
YY 0086-1992
|
(Drug Reefer)
|
|
YY/T 0084.1-1992
|
Major pressure component of round pressure and steam sterilizer Calculation of intension and related stipulations
|
|
YY/T 0084.2-1992
|
Major pressure component of rectangle pressure and steam sterilizer Calculation of intension and related stipulations
|
|
YY 0003-1990
|
sickbed
|
|
YY/T 1947-2025
|
Recombinant collagen protein dressing
|
|
YY/T 0331-2024
|
Performance requirements and test methods for absorbent cotton gauze and absorbent cotton and viscose gauze
|
|
YY/T 1117-2024
|
Plaster of paris bandage
|
|
YY/T 0866-2024
|
Total inward leakage(TIL) determination method of protective face mask for medical use
|
|
YY/T 1938-2024
|
Medical sodium hyaluronate dressing
|
|
YY/T 0720-2023
|
(Single-use product packaging General requirements)
|
|
YY 0469-2023
|
Sterile drainage catheters and accessory devices for single use
|
|
YY/T 0969-2023
|
Single-use medical face mask
|