|
Std ID |
Description (Standard Title) |
Detail |
|
YY/T 0884-2013
|
Evaluation of materials of health care product subject to radiation sterilization
|
YY/T 0884-2013
|
|
YY/T 0886-2013
|
General requirements of disposable inserter for intrauterine devices
|
YY/T 0886-2013
|
|
YY/T 0887-2013
|
Radioactive seeds implantation treatment planning system. Requirements for dose calculations and test methods
|
YY/T 0887-2013
|
|
YY/T 0892-2013
|
Methods for the measurement of leakage radiation of medical diagnostic X-ray tube assemblies
|
YY/T 0892-2013
|
|
YY/T 0894-2013
|
Medical electrical equipment. Dosimetric instruments as used in brachtherapy. Instruments based on well-type ionization chambers
|
YY/T 0894-2013
|
|
YY/T 0895-2013
|
Commissioning of radiotherapy treatment planning systems. Testing for typical externai Beam treatment techniques
|
YY/T 0895-2013
|
|
YY/T 0905.2-2013
|
Dentistry. Plant area equipment. Part 2: Compressor systems
|
YY/T 0905.2-2013
|
|
YY/T 0906-2013
|
Performance testing methods for B-mode ultrasonic diagnostic equipment with intra-cavity probe
|
YY/T 0906-2013
|
|
YY/T 0907-2013
|
Needle-free injectors for medical use. Requirements and test methods
|
YY/T 0907-2013
|
|
YY/T 0908-2013
|
Single-use filter for syringe
|
YY/T 0908-2013
|
|
YY/T 0909-2013
|
Low resistance syring for single use
|
YY/T 0909-2013
|
|
YY/T 0910.1-2013
|
Medical electrical equipment. Medical image display systems. Part 1: Evaluation methods
|
YY/T 0910.1-2013
|
|
YY/T 0969-2013
|
Single-use Medical Face Mask
|
YY/T 0969-2013
|
|
YY/T 1014-2013
|
Dental explorers
|
YY/T 1014-2013
|
|
YY/T 1142-2013
|
Methods of measuring the frequency of medical ultrasonic equipment and probe
|
YY/T 1142-2013
|
|
YY/T 1196-2013
|
Chloride assay kit(Enzymic method)
|
YY/T 1196-2013
|
|
YY/T 1199-2013
|
Triglycerides assay kit (Oxidase method)
|
YY/T 1199-2013
|
|
YY/T 1201-2013
|
Urea assay kit(Enzyme coupling kinetic method)
|
YY/T 1201-2013
|
|
YY/T 1202-2013
|
Kalium assay kit(Enzymic method)
|
YY/T 1202-2013
|
|
YY/T 1203-2013
|
Sodium assay kit(Enzymic method)
|
YY/T 1203-2013
|
|
YY/T 1204-2013
|
Total bile acids assay kit(Enzyme cycle method)
|
YY/T 1204-2013
|
|
YY/T 1207-2013
|
Uric acid assay kit (Uricase-PAP method)
|
YY/T 1207-2013
|
|
YY/T 1208-2013
|
Thiosulfate-citrate-bile salts-sucrose agar medium
|
YY/T 1208-2013
|
|
YY/T 1209-2013
|
BCYE agar medium
|
YY/T 1209-2013
|
|
YY/T 1210-2013
|
MacConkey sorbitol agar medium
|
YY/T 1210-2013
|
|
YY/T 1211-2013
|
Mannitol salt agar medium
|
YY/T 1211-2013
|
|
YY/T 1212-2013
|
Gentamycin agar base medium
|
YY/T 1212-2013
|
|
YY/T 1215-2013
|
Hepatitis C antibody diagnostic kit (Colloid gold method)
|
YY/T 1215-2013
|
|
YY/T 1217-2013
|
Luteinizing hormone quantitative labelling immunoassay kit
|
YY/T 1217-2013
|
|
YY/T 1219-2013
|
Trypticase soy broth medium
|
YY/T 1219-2013
|
|
YY/T 1220-2013
|
Creatine kinase isoenzyme MB (CK-MB) diagnostic kit (Colloid gold method)
|
YY/T 1220-2013
|
|
YY/T 1221-2013
|
Cardiac Troponin I (cTnI) Diagnostic Kit (Colloid Gold Method)
|
YY/T 1221-2013
|
|
YY 0270.1-2011
|
Dentistry. Base polymers. Part 1: Denture base polymers
|
YY 0270.1-2011
|
|
YY 0307-2011
|
Nd: YAG laser medical instrument with continuous wave (CW)
|
YY 0307-2011
|
|
YY 0332-2011
|
Implantable drug-supplying device
|
YY 0332-2011
|
|
YY 0455-2011
|
Medical electrical equipment. Part 2: Particular requirements for the safety of infant radiant warmers
|
YY 0455-2011
|
|
YY 0469-2011
|
Surgical mask
|
YY 0469-2011
|
|
YY 0485-2011
|
Single-used cardioplegia delivery system
|
YY 0485-2011
|
|
YY 0493-2011
|
Dentistry. Elastomeric impression materials
|
YY 0493-2011
|
|
YY 0569-2011
|
Class Ⅱ biological safety cabinets
|
YY 0569-2011
|
|
YY 0580-2011
|
Cardiovascular implants and artificial organs. Cardiopulmonary bypass systems. Arterial blood line filters
|
YY 0580-2011
|
|
YY 0581.1-2011
|
Infusion access adapters. Part 1: Needle access adapters(Heparin plugs)
|
YY 0581.1-2011
|
|
YY 0581.2-2011
|
Infusion access adapter. Part 2: Needleless access adapters
|
YY 0581.2-2011
|
|
YY 0600.5-2011
|
Lung ventilators for medical use. Particular requirements for basic safety and essential performance. Part 5: Gas-powered emergency resuscitators
|
YY 0600.5-2011
|
|
YY 0671.2-2011
|
Sleep apnoea breathing therapy. Part 2: Masks and application accessories
|
YY 0671.2-2011
|
|
YY 0672.2-2011
|
Endoscopy instruments. Part 2: Laparoscopy scissors
|
YY 0672.2-2011
|
|
YY 0719.7-2011
|
Ophthalmic optics. Contact lens care products. Part 7: Biological evaluation test methods
|
YY 0719.7-2011
|
|
YY 0793.2-2011
|
Technical requirements of water treatment equipments for haemodialysis applications and related therapies. Part 2: For single-bed haemodialysis
|
YY 0793.2-2011
|
|
YY 0827-2011
|
Medical electrical equipment. Part 2: Particular requirements for the safety of transport incubators
|
YY 0827-2011
|
|
YY 0828-2011
|
ECG cables and leadwires
|
YY 0828-2011
|
|
YY 0830-2011
|
Ultrasonic therapy equipment for superficial tissue
|
YY 0830-2011
|
|
YY 0832.1-2011
|
Stereotactic and Planning System for Radiotherapy with X-Radiation - Part 1: Stereotactic and Planning System for Radiotherapy with X-Radiation for Head lesion
|
YY 0832.1-2011
|
|
YY 0833-2011
|
Compression physiotherapy equipment for limbs
|
YY 0833-2011
|
|
YY 0834-2011
|
Medical electrical equipment. Part 2-35: Particular requirements for the safety of blankets, pads and mattesses, intended for heating in medical use
|
YY 0834-2011
|
|
YY 0835-2011
|
Dentistry. Amalgam separators
|
YY 0835-2011
|
|
YY 0836-2011
|
Dental handpieces. Dental low-voltage electrical motor
|
YY 0836-2011
|
|
YY 0837-2011
|
Dental handpieces. Dental air-motors
|
YY 0837-2011
|
|
YY 0838-2011
|
Microwave ablation/coagulation equipment
|
YY 0838-2011
|
|
YY 0839-2011
|
Microwave hyperthermia equipment
|
YY 0839-2011
|
|
YY 0845-2011
|
Laser therapeutic equipment. Diode laser equipment for photodynamic therapy
|
YY 0845-2011
|
|
YY 0846-2011
|
Laser therapeutic equipment. Ho: YAG laser equipment
|
YY 0846-2011
|
|
YY 0849-2011
|
Ophthalmic high frequency ultrasound scanner
|
YY 0849-2011
|
|
YY 0852-2011
|
Sterile surgical films for single use
|
YY 0852-2011
|
|
YY 0854.1-2011
|
Performance requirements for pure cotton nonwoven surgical sompresses. Part 1: Nonwovens used in the manufacture of surgical compresses
|
YY 0854.1-2011
|
|
YY 0854.2-2011
|
Performance requirements for pure cotton nonwoven surgical compresses. Part 2: Finished compress
|
YY 0854.2-2011
|
|
YY 0860-2011
|
Radio frequency ablation instrument for cardiac application
|
YY 0860-2011
|
|
YY 0861-2011
|
Ophthalmic optics. Ophthalmic viscosurgical devices
|
YY 0861-2011
|
|
YY 0862-2011
|
Ophthalmic optics. Ocular endotamponades
|
YY 0862-2011
|
|
YY 0868-2011
|
Electrodes for nerve and muscle stimulators
|
YY 0868-2011
|
|
YY 1042-2011
|
Dentistry. Polymer-based restorative materials
|
YY 1042-2011
|
|
YY/T 0019.1-2011
|
Implants for surgery. Intramedullary nailing systems. Part 1: Intramedullary nails with cloverleaf or V-shaped cross-section
|
YY/T 0019.1-2011
|
|
YY/T 0019.2-2011
|
Implants for surgery. Intramedullary nailing systems. Part 2: Medullary pins
|
YY/T 0019.2-2011
|
|
YY/T 0170-2011
|
Dental elevators
|
YY/T 0170-2011
|
|
YY/T 0176.9-2011
|
Ophthalmic scissors
|
YY/T 0176.9-2011
|
|
YY/T 0191-2011
|
Abdominal suction tube
|
YY/T 0191-2011
|
|
YY/T 0270.2-2011
|
Dentistry. Base polymers. Part 2: Orthodontic base polymers
|
YY/T 0270.2-2011
|
|
YY/T 0274-2011
|
Dental scalers
|
YY/T 0274-2011
|
|
YY/T 0275-2011
|
Dental pluggers
|
YY/T 0275-2011
|
|
YY/T 0278-2011
|
Dental obturation
|
YY/T 0278-2011
|
|
YY/T 0345.1-2011
|
Implants for surgery. Skeletal pins and wires. Part 1: Material and mechanical requirements
|
YY/T 0345.1-2011
|
|
YY/T 0463-2011
|
Dentistry. Casting investments and refractory die materials
|
YY/T 0463-2011
|
|
YY/T 0475-2011
|
Dry chemistry urine analyzer
|
YY/T 0475-2011
|
|
YY/T 0478-2011
|
Reagent strips for urinalysis
|
YY/T 0478-2011
|
|
YY/T 0567.3-2011
|
Aseptic processing of health care products. Part 3: Lyophilization
|
YY/T 0567.3-2011
|
|
YY/T 0567.4-2011
|
Aseptic processing of health care products. Part 4: Clean-in-place technologies
|
YY/T 0567.4-2011
|
|
YY/T 0567.5-2011
|
Aseptic processing of health care products. Part 5: Sterilization in place
|
YY/T 0567.5-2011
|
|
YY/T 0567.6-2011
|
Aseptic processing of health care products. Part 6: Isolator systems
|
YY/T 0567.6-2011
|
|
YY/T 0590.3-2011
|
Medical electrical equipment. Characteristics of digital X-ray imaging devices. Part 1-3: Determination of the detective quantum efficiency. Detectors used in dynamic imaging
|
YY/T 0590.3-2011
|
|
YY/T 0591-2011
|
Implants for orthosynthesis. Metallic lockable intramedullary nail
|
YY/T 0591-2011
|
|
YY/T 0681.10-2011
|
Test methods for sterile medical device package. Part 10: Test for microbial barrier ranking of porous package material
|
YY/T 0681.10-2011
|
|
YY/T 0681.6-2011
|
Test methods for sterile medical device package. Part 6: Evaluation of chemical resistance of printed inks and coatings on flexible packaging materials
|
YY/T 0681.6-2011
|
|
YY/T 0681.7-2011
|
Test methods for sterile medical device package. Part 7: Evaluating inks or coating adhesion to flexible packaging materials using tape
|
YY/T 0681.7-2011
|
|
YY/T 0681.8-2011
|
Test methods for sterile medical device package. Part 8: Coating/adhesive weight determination
|
YY/T 0681.8-2011
|
|
YY/T 0681.9-2011
|
Test methods for sterile medical device package. Part 9: Burst testing of flexible package seals using internal air pressurization weight restraining plates
|
YY/T 0681.9-2011
|
|
YY/T 0698.1-2011
|
Packaging materials for terminal sterilized medical devices. Part 1: Co-extrusion plastic films used for vacuum forming packaging. Requirements and test methods
|
YY/T 0698.1-2011
|
|
YY/T 0822-2011
|
Ethylene oxide liquefied gas for sterilization
|
YY/T 0822-2011
|
|
YY/T 0823-2011
|
The fluoride compounds for dental carious prevention materials
|
YY/T 0823-2011
|
|
YY/T 0824-2011
|
Dental calcium hydroxide pulp capping and lining materials
|
YY/T 0824-2011
|
|
YY/T 0825-2011
|
Dentistry. Products for external tooth bleaching
|
YY/T 0825-2011
|
|
YY/T 0826-2011
|
Dental temporary polymer-based crown and bridge materials
|
YY/T 0826-2011
|