|
Std ID |
Description (Standard Title) |
Detail |
|
GB/T 15259-1994
|
Terms relating to mine safety
|
GB/T 15259-1994
|
|
GB/T 14441-1993
|
Safety code for painting. Terminology
|
GB/T 14441-1993
|
|
GB/T 12137-1989
|
Method for pneumatic testing of cylinders
|
GB/T 12137-1989
|
|
GB/T 7231-1987
|
Basic identification colours and code indications for industrial pipelines
|
GB/T 7231-1987
|
|
GB/T 6527.2-1986
|
General code of safety colour
|
GB/T 6527.2-1986
|
|
GB/T 7544-2019
|
Natural rubber latex male condoms - Requirements and test methods
|
GB/T 7544-2019
|
|
GB/T 30917-2014
|
Determination of nitrosamines migrating from natural rubber latex condoms
|
GB/T 30917-2014
|
|
GB/T 7544.10-1999
|
Rubber condoms--Part 10: Packaging and labelling--Condoms in consumer packages
|
GB/T 7544.10-1999
|
|
GB/T 7544.2-1999
|
Rubber condoms--Part 2: Determination of length
|
GB/T 7544.2-1999
|
|
GB/T 7544.3-1999
|
Rubber condoms--Part 3: Determination of width
|
GB/T 7544.3-1999
|
|
GB/T 7544.5-1999
|
Rubber condoms--Part 5: Testing for holes--Water leak test
|
GB/T 7544.5-1999
|
|
GB/T 7544.6-1999
|
Rubber condoms--Part 6: Determination of bursting volume and pressure
|
GB/T 7544.6-1999
|
|
GB/T 7544.7-1999
|
Rubber condoms--Part 7: Oven conditioning
|
GB/T 7544.7-1999
|
|
GB/T 7544.9-1999
|
Rubber condoms--Part 9: Determination of tensile properties
|
GB/T 7544.9-1999
|
|
GB/T 45634-2025
|
Technical specifications for the prevention and control of arthropod-transmitted infectious diseases at entry-exit points
|
GB/T 45634-2025
|
|
GB/T 45635-2025
|
Specifications for the control of biosafety risks in the operation and use of entry-exit special products
|
GB/T 45635-2025
|
|
GB/T 45636-2025
|
Technical specifications for the prevention and control of contact-transmitted infectious diseases at entry-exit points
|
GB/T 45636-2025
|
|
GB/T 19380-2016
|
Definition and demarcation of water-borne iodine-excess areas and iodine-excess endemial areas
|
GB/T 19380-2016
|
|
GB/T 16180-2014
|
Standard for identify work ability -- Gradation of disability caused by work-related injuries and occupational diseases
|
GB/T 16180-2014
|
|
GB/T 28236-2011
|
Method of chromosome aberration analysis for biological dose assessment
|
GB/T 28236-2011
|
|
GB/T 16180-2006
|
Standard for identify work ability -- Gradation of disability caused by work-related injuries and occupational diseases
|
GB/T 16180-2006
|
|
GB/T 9.1-2005
|
Small VRLA battery technology conditions
|
GB/T 9.1-2005
|
|
GB/T 28002-2002
|
Occupational health and safety management system -- Guidance
|
GB/T 28002-2002
|
|
GB/T 28001-2001
|
Occupational health and safety management system specification
|
GB/T 28001-2001
|
|
GB/T 18197-2000
|
Medical management standard for internal contamination of radionuclides
|
GB/T 18197-2000
|
|
GB/T 18198-2000
|
Estimation standards of personal cumulative exposure to radon decay products for miners
|
GB/T 18198-2000
|
|
GB/T 18199-2000
|
Medical management and treatment programme for personnel exposed to accidental external irradiation
|
GB/T 18199-2000
|
|
GB/T 18200-2000
|
Report form and contents for radiation induced occupational diseases
|
GB/T 18200-2000
|
|
GB/T 18201-2000
|
List for radiation induced diseases
|
GB/T 18201-2000
|
|
GB/T 16854.1-1997
|
Rules of drafting and presentation of diagnostic criteria of occupational disease--Part 1: General guideline for drafting diagnostic criteria of occupational disease
|
GB/T 16854.1-1997
|
|
GB/T 16854.2-1997
|
Rule of drafting and presentation of diagnostic criteria of occupational disease--Part 2: Terms of diagnosis of occupational disease
|
GB/T 16854.2-1997
|
|
GB/T 16180-1996
|
Assessment and gradation of disability caused by work-related injuries and occupational diseases
|
GB/T 16180-1996
|
|
GB/T 16148-1995
|
Specification for assessments of intakes and internal doses of radionuclides
|
GB/T 16148-1995
|
|
GB/T 16149-1995
|
Specification of estimation of dose for chronic radiation sickness from external exposure
|
GB/T 16149-1995
|
|
GB/T 14-1988
|
Cup head square neck bolts with large head
|
GB/T 14-1988
|
|
GB/T 235-1988
|
Metallic materials--Reverse bend test (Sheet and strip 3mm thick or less)
|
GB/T 235-1988
|
|
GB/T 247-1988
|
General rule of acceptance, package, mark and certification for steel plates (sheets) and strips
|
GB/T 247-1988
|
|
GB/T 91-1986
|
Split pins
|
GB/T 91-1986
|
|
GB/T 65-1985
|
Slotted cheese head screws
|
GB/T 65-1985
|
|
GB/T 67-1985
|
Slotted pan head screws
|
GB/T 67-1985
|
|
GB/T 68-1985
|
Slotted countersunk head screws
|
GB/T 68-1985
|
|
GB/T 69-1985
|
Slotted raised countersunk head screws
|
GB/T 69-1985
|
|
GB/T 70-1985
|
Hexagon socket cap head screws
|
GB/T 70-1985
|
|
GB/T 78-1985
|
Hexagon socket set screws with cone point
|
GB/T 78-1985
|
|
GB/T 79-1985
|
Hexagon socket set screws with dog point
|
GB/T 79-1985
|
|
GB/T 80-1985
|
Hexagon socket set screws with cup point
|
GB/T 80-1985
|
|
GB/T 239-1984
|
Metallic materials-wire-torsion test
|
GB/T 239-1984
|
|
GB/T 309-1984
|
Rolling bearings--Needle rollers
|
GB/T 309-1984
|
|
GB/T 311.2-1983
|
High voltage test techniques--Part 1: General test condition and requirements
|
GB/T 311.2-1983
|
|
GB/T 311.3-1983
|
High voltage test techniques--Part 2: Test procedures
|
GB/T 311.3-1983
|
|
GB/T 311.4-1983
|
High voltage test techniques--Part 3: Measuring device
|
GB/T 311.4-1983
|
|
GB/T 311.5-1983
|
High voltage test techniques--Part 4: Application guide for measuring devices
|
GB/T 311.5-1983
|
|
GB/T 245-1982
|
Method for flanging test on tubes of metals
|
GB/T 245-1982
|
|
GB/T 246-1982
|
Method for flattening test on tubes of metals
|
GB/T 246-1982
|
|
GB/T 3-1979
|
Screw thread runouts, undercuts and chamfers--Dimensions
|
GB/T 3-1979
|
|
GB/T 38-1976
|
Bolts--Technical requirements
|
GB/T 38-1976
|
|
GB/T 61-1976
|
Nuts--Technical requirements
|
GB/T 61-1976
|
|
GB/T 89-1976
|
Screws--Technical requirements
|
GB/T 89-1976
|
|
GB/T 26366-2021
|
Hygienic requirements for chlorine dioxide disinfectant
|
GB/T 26366-2021
|
|
GB/T 15981-2021
|
Evaluating method for the efficacy of sterilization for disinfection equipment
|
GB/T 15981-2021
|
|
GB/T 38504-2020
|
Evaluation method of disinfection effect of spray disinfection
|
GB/T 38504-2020
|
|
GB/T 27949-2011
|
Hygienic requirements for medical items disinfection
|
GB/T 27949-2011
|
|
GB/T 16145-2022
|
Gamma-ray spectrometry method for the determination of radionuclides in environmental and biological samples
|
GB/T 16145-2022
|
|
GB/T 16137-2021
|
Methods for estimation of examinee’s organ doses in X-ray diagnosis
|
GB/T 16137-2021
|
|
GB/T 41144-2021
|
Requirements and test methods for ventilated protective clothing against radioactive aerosol
|
GB/T 41144-2021
|
|
GB/T 16145-2020
|
Gamma spectrometry method of analysing radionuclides in biological samples
|
GB/T 16145-2020
|
|
GB/T 16140-2018
|
Determination of radionuclides in water by gamma spectrometry
|
GB/T 16140-2018
|
|
GB/T 17982-2018
|
Models and parameters for calculating radiation doses to the public in the emergency of a nuclear accident
|
GB/T 17982-2018
|
|
GB/T 11713-2015
|
General analytical methods of high-purity germanium gamma spectrometer
|
GB/T 11713-2015
|
|
GB/T 16146-2015
|
Requirements for control of indoor radon and its progeny
|
GB/T 16146-2015
|
|
GB/T 11743-2013
|
Determination of radionuclides in soil by gamma spectrometry
|
GB/T 11743-2013
|
|
GB/T 16149-2012
|
Specification of dose estimation for chronic radiation sickness from external exposure
|
GB/T 16149-2012
|
|
GB/T 16148-2009
|
Specification for assessments of intakes and internal doses of radionuclides
|
GB/T 16148-2009
|
|
GB/T 17982-2000
|
Models and parameters for calculating radiation doses to the public in the event of a nuclear accident
|
GB/T 17982-2000
|
|
GB/T 17150-1997
|
Radiological protection monitoring procedure. Part 1: Industrial X-ray detection
|
GB/T 17150-1997
|
|
GB/T 16135-1995
|
Principles of estimate on personal dose from external exposure in radiation accident
|
GB/T 16135-1995
|
|
GB/T 16136-1995
|
Radiological protection requirement for design of γ-ray teletherapy rooms
|
GB/T 16136-1995
|
|
GB/T 16137-1995
|
Methods for estimation of examineeorgan doses in X-ray diagnosis
|
GB/T 16137-1995
|
|
GB/T 16138-1995
|
Guide for the use of potassium iodide in accident of radioiodine contamination
|
GB/T 16138-1995
|
|
GB/T 16139-1995
|
Dose conversion coefficients for use in protection against neutron radiation
|
GB/T 16139-1995
|
|
GB/T 16140-1995
|
Gamma spectrometry method for analysis of radionuclides in water
|
GB/T 16140-1995
|
|
GB/T 16141-1995
|
Analytical method for radionuclides by alpha spectrometry
|
GB/T 16141-1995
|
|
GB/T 16142-1995
|
Annual limits on intake of some radionuclides for the public members with the different age
|
GB/T 16142-1995
|
|
GB/T 16144-1995
|
Annual limits on intakes for radioactive aerosol with different particle size
|
GB/T 16144-1995
|
|
GB/T 16145-1995
|
Gamma spectrometry method of analysing radionuclides in biological samples
|
GB/T 16145-1995
|
|
GB/T 11712-1989
|
Dose conversion factors for use in protection against χ, γ-ray external radiation
|
GB/T 11712-1989
|
|
GB/T 11713-1989
|
Standard methods of analyzing low specific gamma radioactivity samples by semiconductor gamma spectrometers
|
GB/T 11713-1989
|
|
GB/T 11743-1989
|
Gamma spectrometry method of analysing radionuclides in soil
|
GB/T 11743-1989
|
|
GB/T 147-1989
|
Sizes of unprocessed paper for printing, writing and drawing
|
GB/T 147-1989
|
|
GB/T 180-1988
|
Table tennis ball
|
GB/T 180-1988
|
|
GB/T 232-1988
|
Metallic materials--Bend test
|
GB/T 232-1988
|
|
GB/T 117-1986
|
Taper pins
|
GB/T 117-1986
|
|
GB/T 118-1986
|
Taper pins with internal thread
|
GB/T 118-1986
|
|
GB/T 119-1986
|
Parallel pins
|
GB/T 119-1986
|
|
GB/T 120-1986
|
Parallel pins with internal thread
|
GB/T 120-1986
|
|
GB/T 5294-1985
|
Methods of personal dose monitoring for radiation workers
|
GB/T 5294-1985
|
|
GB/T 233-1982
|
Method for forging test of metals
|
GB/T 233-1982
|
|
GB/T 36876-2018
|
Hygienic requirements of lighting design and setting in primary and middle school
|
GB/T 36876-2018
|
|
GB/T 17225-2017
|
Hygienic requirements of microclimate for heating classroom in middle and elementary school
|
GB/T 17225-2017
|
|
GB/T 17226-2017
|
Hygienic requirements of classroom ventilation in middle and elementary school
|
GB/T 17226-2017
|