|
Std ID |
Description (Standard Title) |
|
GB/T 23365-2009
|
Electrochemical performance test of lithium cobalt oxide -- Test method for specific capacity and charge-discharge efficiency of the first cycle
|
|
GB/T 23366-2009
|
Electrochemical performance test of lithium cobalt oxide -- Test method for discharge plateau capacity ratio and cycle life
|
|
GB/T 23367.1-2009
|
Methods for chemical analysis of lithium cobalt oxide -- Part 1: Determination of cobalt content -- EDTA titration
|
|
GB/T 23367.2-2009
|
Methods for chemical analysis of lithium cobalt oxide -- Part 2: Determination of lithium, nickel, manganese, magnesium, aluminium, iron, sodium, calcium and copper content -- Inductively coupled plasma atomic emission spectrometry
|
|
GB/T 24485-2009
|
Niobium carbide powder
|
|
GB/T 2967-2008
|
Cast tungsten carbide powder
|
|
GB/T 4295-2008
|
[Replaced by GB/T 4295-2019] Tungsten carbide powder
|
|
GB/T 5124.1-2008
|
Methods for chemical analysis of hard metals -- Determination of total carbon content -- Gravimetric method
|
|
GB/T 5124.2-2008
|
Methods for chemical analysis of hard metals -- Determination of insoluble (free) carbon content -- Gravimetric method
|
|
GB/T 7160-2008
|
Carbonyl Nickel Powder
|
|
GB/T 2085.1-2007
|
Aluminium powder -- Part 1: Air atomized aluminium powder
|
|
GB/T 2085.2-2007
|
Aluminum powder -- Part 2: Inflammable fine aluminum powder
|
|
GB/T 19743-2005
|
Water atomized pure iron powder and alloyed steel powder for powder metallurgy
|
|
GB/T 19588-2004
|
Nano-nickel powder
|
|
GB/T 19589-2004
|
Nano-zine oxide
|
|
GB/T 5160-2002
|
Metallic powders -- Determination of green strength by transverse rupture of rectangular compacts
|
|
GB/T 5319-2002
|
Sintered metal materials, excluding hard metals -- Determination of transverse rupture strength
|
|
GB/T 5158.4-2001
|
Determination of the total oxygen content of the metal powder reduction-extraction
|
|
GB/T 5158-1999
|
Metallic powders--Determination of loss of mass on hydrogen reduction (hydrogen loss)
|
|
GB/T 1773-1995
|
Flake silver powders
|
|
GB/T 1774-1995
|
Superfine silver powders
|
|
GB/T 1775-1995
|
Superfine gold powders
|
|
GB/T 1776-1995
|
Superfine platinum powder
|
|
GB/T 1777-1995
|
Superfine palladium powder
|
|
GB/T 4136-1994
|
Reduced iron powders for powder metallurgy
|
|
GB/T 4295-1993
|
Tungsten carbide powder
|
|
GB/T 2082-1989
|
Industrial aluminium powder
|
|
GB/T 2083-1989
|
Aluminium powder for paint
|
|
GB/T 2084-1989
|
Bubble aluminium powder
|
|
GB/T 2085-1989
|
Inflammable aluminium powder
|
|
GB/T 2086-1989
|
Inflammable fine aluminium powder
|
|
GB/T 2967-1989
|
Cast tungsten carbide
|
|
GB/T 8548-1987
|
Metallic powder material Nickel-based alloy powder for spraying
|
|
GB/T 8549-1987
|
Metallic powder material--Self-fluxing Fe-Cr-B-Si alloy powder
|
|
GB/T 5774-1986
|
Aluminum-coated nickel composite powders
|
|
GB/T 6452-1986
|
Zirconium-aluminium alloy powders for getter
|
|
GB/T 6885-1986
|
Hardmetals. Sampling and testing of mixed powder
|
|
GB/T 5060-1985
|
Metallic powders--Determination of apparent density--Part 2: Scott volumeter method
|
|
GB/T 5157-1985
|
Metallic powders--Determination of particle size distribution by method of sedimentation balance
|
|
GB/T 5159-1985
|
Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering
|
|
GB/T 5160-1985
|
Metallic powders--Determination of green strength by transverse rupture of rectangular com-pacts
|
|
GB/T 5161-1985
|
Metallic powders--Determination of effective density--Liquid immersion method
|
|
GB/T 5246-1985
|
Electrolytic copper powder
|
|
GB/T 5247-1985
|
Electrolytic nickel powder
|
|
GB/T 5315-1985
|
Metallic powder material--Self-fluxing Ni-B-Si alloy powder
|
|
GB/T 5316-1985
|
Metallic powder material--Self-fluxing Ni-Cr-B-Si alloy powder
|
|
GB/T 5318-1985
|
Sintered metals materials, excluding hardmetals. Unnotched impact test piece
|
|
GB/T 5319-1985
|
Sintered metal materials, excluding hardmetals--Determination of transverse rupture strength
|
|
GB/T 3501-1983
|
Technical requirements of superfine ruthenium dioxide hydrate powder
|
|
GB/T 3502-1983
|
Technical requirements of superfine palladium oxide powder
|
|
GB/T 3626-1983
|
Technical requirements of tantalum pentoxide
|
|
GB/T 3627-1983
|
Technical requirements of niobium pentoxide
|
|
GB/T 3990-1983
|
Nickel-coated alumina composite powder
|
|
GB/T 3991-1983
|
Cobalt-coated tungsten carbide composite powder
|
|
GB/T 3992-1983
|
Nickel-coated chromium composite powder
|
|
GB/T 3993-1983
|
Nickel-coated copper composite powder
|
|
GB/T 3256.1-1982
|
Chemical analysis of zirconium powder for electro-vacuum uses--The gravimetric method for determination of total zirconium and active zirconium
|
|
GB/T 3458-1982
|
Technical requirements of tungsten powders
|
|
GB/T 3459-1982
|
Tungsten bars
|
|
GB/T 3461-1982
|
Technical requirements of molybdenum powders
|
|
GB/T 1480-2025
|
Metallic powders - Determination of particle size by dry sieving
|
|
GB/T 45338-2025
|
General principle for hot isostatic pressing densification
|
|
GB/T 44194-2024
|
Additive manufacturing - Technical specification for reuse of metal powder
|
|
GB/T 44237-2024
|
Packaging, marking, transport and storage for additive manufacturing metal powder
|
|
GB/T 18376.2-2024
|
Grades of cemented carbide - Part 2: Grades of cemented carbide for rock drilling and engineering
|
|
GB/T 2077-2023
|
Indexable carbide inserts - Corner radii
|
|
GB/T 2076-2021
|
Indexable inserts for cutting tools - Designation
|
|
GB/T 40389-2021
|
Sintered metal materials, excluding hardmetals - Measurement of surface roughness
|
|
GB/T 38516-2020
|
Permeable sintered metal materials - Determination of average pore size of medium flow
|
|
GB/T 5243-2020
|
Marking, packing, transport and storage of cemented carbide products
|
|
GB/T 6885-2020
|
Hard metals - Sampling and testing method of mixed powders
|
|
GB/T 39251-2020
|
(Additive Manufacturing Metal Powder Performance Characterization Method)
|
|
GB/T 2078-2019
|
Dimensions of indexable hard metal (carbide) inserts with rounded corners, with cylindrical fixing hole
|
|
GB/T 34916-2017
|
Nanotechnologies -- Multi-walled carbon nanotubes -- Determination of amorphous carbon content by thermogravimetric analysis
|
|
GB/T 2079-2015
|
Indexable hard metal (carbide) inserts with rounded corners, without fixing hole -- Dimensions
|
|
GB/T 18376.3-2015
|
Grades of cemented carbide -- Part 3: Grades of cemented carbide for wear parts
|
|
GB/T 18376.2-2014
|
Grades of cemented carbide -- Part 2: Grades of cemented carbide for geological and mining tools
|
|
GB/T 7997-2014
|
Hard metals -- Vickers hardness test
|
|
GB/T 1480-2012
|
Metallic powders -- Determination of particle size by dry sieving
|
|
GB/T 5314-2011
|
Powders for powder metallurgical purposes -- Sampling
|
|
GB/T 23271-2009
|
Molybdenum disulfide
|
|
GB/T 4309-2009
|
Classification and designation for powder metallurgy materials
|
|
GB/T 18376.1-2008
|
Grades of cemented carbide -- Part 1: Grades of cemented carbide for cutting tools
|
|
GB/T 3500-2008
|
Powder metallurgy -- Vocabulary
|
|
GB/T 2076-2007
|
Indexable inserts for cutting tools -- Designation
|
|
GB/T 2078-2007
|
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole -- Dimensions
|
|
GB/T 2080-2007
|
Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole -- Dimensions
|
|
GB/T 18376.1-2001
|
Carbide grade -- Part 1: cutting tools with carbide grade
|
|
GB/T 18376.2-2001
|
Part 2 of carbide grade: geological, mining tools with carbide grade
|
|
GB/T 18376.3-2001
|
Grades of cemented carbide -- Part 3: grades of cemented carbide for wear parts
|
|
GB/T 3500-1998
|
Powder metallurgy--Vocabulary
|
|
GB/T 2076-1987
|
Indexable inserts for cutting tools--Designation
|
|
GB/T 6804-1986
|
Sintered metal bushes determination of radial crushing strength
|
|
GB/T 5314-1985
|
Powders for powder metallurgical purposes--Sampling
|
|
GB/T 4309-1984
|
Classification and designation for powder metallurgy materials
|
|
GB/T 21181-2025
|
Secondary lead ingots
|
|
GB/T 45203-2024
|
Recycled black mass for lithium ion battery
|
|
GB/T 21182-2022
|
Scraps of cemented carbide
|
|
GB/T 21651-2018
|
Regenerated zinc and zinc alloy ingots
|
|
GB/T 21181-2017
|
Secondarily lead and lead alloy ingots
|