|
Std ID |
Description (Standard Title) |
|
GB/T 6467-1986
|
The involute master of gear
|
|
GB/T 6468-1986
|
The helix master of gear
|
|
GB/T 1216-1985
|
Micrometers
|
|
GB/T 1219-1985
|
Dial gauges
|
|
GB/T 5106-1985
|
Gauges for straight cylindrical involute splines
|
|
GB/T 6060.2-1985
|
Roughness comparison specimens--Ground, turned, bored, milled, shaped and planed
|
|
GB/T 6062-1985
|
Stylus instruments for the measurement of surface roughness by the profile method--Profile recording instruments and profile meters by the system M
|
|
GB/T 6091-1985
|
Straight edge
|
|
GB/T 6092-1985
|
Squares 90 degree
|
|
GB/T 4755-1984
|
Microkator
|
|
GB/T 3934-1983
|
Gauges for general purpose screw threads
|
|
GB/T 1957-1981
|
Limit gauges for plain workpiece
|
|
GB/T 1484-1979
|
Gauges for bayonet lamp caps
|
|
GB/T 1581-1979
|
Gauges for tapered screw thread, metric series
|
|
GB/T 20333-2023
|
Taps for parallel and taper pipe threads general dimensions and marking
|
|
GB/T 1127-2023
|
Woodruff keyseat cutters
|
|
GB/T 20328-2023
|
Circular screwing dies of R series for taper pipe threads
|
|
GB/T 21951-2023
|
Cubic boron nitride inserts, tipped or solid - Dimensions, types
|
|
GB/T 21952-2023
|
Polycristalline diamond inserts, tipped - Dimensions, types
|
|
GB/T 43076-2023
|
CVD diamond tools - Categorization
|
|
GB/T 6138-2023
|
Subland twist drills for holes prior to tapping screw threads
|
|
GB/T 1115-2022
|
Cylindrical cutters
|
|
GB/T 17112-2022
|
Spot drills
|
|
GB/T 4256-2022
|
Core drills with parallel shanks and with Morse taper shanks
|
|
GB/T 25672-2021
|
Hammer drill bit and shell hammer drill bit
|
|
GB/T 20326-2021
|
Long full-diameter shank taps with recess
|
|
GB/T 6132-2021
|
Interchangeability dimensions for milling cutter or milling cutter arbors
|
|
GB/T 20323-2020
|
Milling cutters designation - Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges
|
|
GB/T 37891.1-2019
|
Cutter arbors with parallel key and tenon drive -- Part 1: General dimensions
|
|
GB/T 37891.2-2019
|
Cutter arbors with parallel key and tenon drive -- Part 2: Dimensions and designation of tool holders with hollow taper interface with flange contact surface
|
|
GB/T 37891.3-2019
|
Cutter arbors with parallel key and tenon drive -- Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changers
|
|
GB/T 37891.4-2019
|
Cutter arbors with parallel key and tenon drive -- Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changers
|
|
GB/T 37891.5-2019
|
Cutter arbors with parallel key and tenon drive -- Part 5: Dimensions and designation of tool holders with polygonal taper interface with flange contact surface
|
|
GB/T 37891.6-2019
|
Cutter arbors with parallel key and tenon drive -- Part 6: Dimensions and designation of tool holders with modular taper interface with ball track system
|
|
GB/T 37895-2019
|
Dimensions of accessories for cutter arbors with parallel key and tenon drive
|
|
GB/T 36485.1-2018
|
Tool holders with rectangular shank for indexable inserts -- Part 1: General, correlation and determination of dimensions
|
|
GB/T 36485.2-2018
|
Tool holders with rectangular shank for indexable inserts -- Part 2: Arbor dimension
|
|
GB/T 1132-2017
|
Machine chucking reamers with cylindrical shanks and Morse taper shanks
|
|
GB/T 1139-2017
|
Morse and metric taper reamers
|
|
GB/T 33524.1-2017
|
Modular taper interface with ball track system -- Part 1: Dimensions and designation of shanks
|
|
GB/T 33524.2-2017
|
Modular taper interface with ball track system -- Part 2: Dimensions and designation of receivers
|
|
GB/T 4243-2017
|
Long fluted machine reamers with Morse taper shanks
|
|
GB/T 4247-2017
|
Machine bridge reamers with Morse taper shanks
|
|
GB/T 6122-2017
|
Corner-rounding cutters
|
|
GB/T 1443-2016
|
Self-holding tapers for machine tools and tool shanks
|
|
GB/T 16459-2016
|
Tool life testing in face milling
|
|
GB/T 16460-2016
|
Tool life testing in end milling
|
|
GB/T 16461-2016
|
Tool-life testing with single-point turning tools
|
|
GB/T 32556.1-2016
|
Cutter arbors with tenon drive -- Part 1: Dimension of Morse taper
|
|
GB/T 32556.2-2016
|
Cutter arbors with tenon drive -- Part 2: Dimensions of 7: 24 taper
|
|
GB/T 32556.3-2016
|
Cutter arbors with tenon drive -- Part 3: Dimensions of hollow taper interface with flange contact surface
|
|
GB/T 32557.1-2016
|
Polygonal taper interface with flange contact surface -- Part 1: Dimensions and designation of shanks
|
|
GB/T 32557.2-2016
|
Polygonal taper interface with flange contact surface -- Part 2: Dimensions and designation of receivers
|
|
GB/T 32558-2016
|
Reduction sleeves with 7/24 external and Morse internal taper
|
|
GB/T 6078-2016
|
Centre drills
|
|
GB/T 6083-2016
|
Gear hobs -- The basic types and dimensions
|
|
GB/T 6084-2016
|
Gear hobs -- General technical specification
|
|
GB/T 1114-2016
|
Shell end mills
|
|
GB/T 51046-2014
|
Code for design of national forest park
|
|
GB/T 51050-2014
|
Technical code for energy measuring and monitoring engineering in the iron and steel enterprises
|
|
GB/T 51061-2014
|
Code for grid identification system
|
|
GB/T 19449.3-2013
|
Hollow taper interface with flange contact surface -- Part 3: Dimensions of shanks for stationary tools
|
|
GB/T 19449.4-2013
|
Hollow taper interface with flange contact surface -- Part 4: Dimensions of receivers for stationary tools
|
|
GB/T 10944.1-2013
|
Tool shanks with 7/24 taper for automatic tool changers -- Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF
|
|
GB/T 10944.2-2013
|
Tool shanks with 7/24 taper for automatic tool changers -- Part 2: Dimensions and designation of shanks of forms J, JD and JF
|
|
GB/T 10944.3-2013
|
Tools shanks with 7/24 taper for automatic tool changers -- Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF
|
|
GB/T 10944.4-2013
|
Tool shanks with 7/24 taper for automatic tool changers -- Part 4: Technical specifications for shanks
|
|
GB/T 10944.5-2013
|
Tool shanks with 7: 24 taper for automatic tool changers -- Part 5: Technical specifications of Retention knobs
|
|
GB/T 28247-2012
|
Rotary gear milling cutters
|
|
GB/T 28248-2012
|
Cemented carbide drills for printed boards
|
|
GB/T 28249-2012
|
The types and dimensions of timing belt wheel hobs
|
|
GB/T 28250-2012
|
The types and dimensions of timing belt mold hobs
|
|
GB/T 28251-2012
|
The technical specifications for timing belt wheel hobs and timing belt mold hobs
|
|
GB/T 28252-2012
|
Hobs for pre-grinding gear
|
|
GB/T 28253-2012
|
Thread forming tap
|
|
GB/T 28254-2012
|
Spiral pointed taps
|
|
GB/T 28255-2012
|
Taps with the hollow interior to deposit the swarf
|
|
GB/T 28256-2012
|
Trapezoidal taps
|
|
GB/T 28257-2012
|
Long shank nut taps
|
|
GB/T 28691-2012
|
High precision trapezoidal thread broaching tap
|
|
GB/T 1112-2012
|
Slot drills
|
|
GB/T 6119-2012
|
Side and face milling cutter
|
|
GB/T 6120-2012
|
Metal slitting saw
|
|
GB/T 12204-2010
|
Glossary of general terms in metal cutting
|
|
GB/T 14895-2010
|
Terms in metal cutting tools -- Gear cutters
|
|
GB/T 17984-2010
|
Twist drills -- Technical specifications
|
|
GB/T 25369-2010
|
Metal cutting-bimetal band saw blades -- Technical specifications
|
|
GB/T 25664-2010
|
Milling cutters for high speed machining -- Safety requirements
|
|
GB/T 25665-2010
|
Solid end mills with corner radii and cylindrical shanks made of hard cutting materials -- Dimensions
|
|
GB/T 25666-2010
|
Parallel shank twist drills with carbide tips
|
|
GB/T 25667.1-2010
|
Solid carbide twist drills with parallel shank -- Part 1: The types and dimensions for parallel shank twist drills
|
|
GB/T 25667.2-2010
|
Solid carbide twist drills with parallel shank -- Part 2: The types and dimensions for parallel shank twist drills with 2-degree angular flats
|
|
GB/T 25667.3-2010
|
Solid carbide twist drills with parallel shank -- Part 3: Technical specifications
|
|
GB/T 25668.1-2010
|
Modular tooling system for boring and milling -- Part 1: Designation
|
|
GB/T 25668.2-2010
|
Modular tooling system for boring and milling -- Part 2: TMG21 Tooling system dimensions
|
|
GB/T 25669.1-2010
|
Tooling system for NC boring and milling machine -- Part 1: Designation
|
|
GB/T 25669.2-2010
|
Tooling system for NC boring and milling machine -- Part 2: Dimensions
|
|
GB/T 25670-2010
|
End mills with brazed angular hard metal tips
|
|
GB/T 25671-2010
|
High speed steels metal cutting tools with hard coating -- Technical specifications
|
|
GB/T 25672-2010
|
Hammer drills and shell hammer drills
|