|
US$909.00 · In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 5106-2012: Straight cylindrical involute splines -- Gauge
Status: Valid GB/T 5106: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 5106-2012 | English | 909 |
Add to Cart
|
7 days [Need to translate]
|
Straight cylindrical involute splines -- Gauge
| Valid |
GB/T 5106-2012
|
| GB/T 5106-2006 | English | RFQ |
ASK
|
6 days [Need to translate]
|
Straight cylindrical involute splines gauge
| Obsolete |
GB/T 5106-2006
|
| GB/T 5106-1985 | English | 759 |
Add to Cart
|
5 days [Need to translate]
|
Gauges for straight cylindrical involute splines
| Obsolete |
GB/T 5106-1985
|
PDF similar to GB/T 5106-2012
Basic data | Standard ID | GB/T 5106-2012 (GB/T5106-2012) | | Description (Translated English) | Straight cylindrical involute splines -- Gauge | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J42 | | Classification of International Standard | 17.040.30 | | Word Count Estimation | 41,494 | | Older Standard (superseded by this standard) | GB/T 5106-2006 | | Quoted Standard | GB/T 1957-2006; GB/T 3478.1; GB/T 3478.2; GB/T 3478.3; GB/T 3478.4; GB/T 3478.5; GB/T 3478.6; GB/T 3478.7; GB/T 3478.8; GB/T 3478.9 | | Regulation (derived from) | National Standards Bulletin No. 41 of 2012 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the Straight cylindrical involute spline gauges terms and definitions, symbols and description, classification, type and size parameters, tolerances, requirements, test methods, marking and packaging. Specified in this standard gau | GB/T 5106-2012: Straight cylindrical involute splines -- Gauge---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Straight cylindrical involute splines. Gauge
ICS 17.040.30
J42
National Standards of People's Republic of China
Replacing GB/T 5106-2006
Straight cylindrical involute spline gauges
Issued on. 2012-12-31
2013-10-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions
Symbol Description 1 and 4
5 Category 2
6 type and size parameters 4
7 Tolerance 15
8 requires 18
9 18 test method
Marking and packaging 10 21
Regulation controversial decision to use rule 22 Appendix A (normative) amount
Annex B (informative) measuring a workpiece spline path, external splines large diameter smooth limit gauge 24
Annex C (informative) spline gauge shape the structure and size 25
Annex D (informative) Calculation example gauge cross bar and rod spacing distance MRe MRi 28
Figure 1 a gauge test workpiece space width or tooth thickness limit size of 4 3
Figure 2 integrated through the end ring 5
FIG. 3 through the end ring with integrated proofing plug 6
4 part-toothed ring gauges pass 7
FIG. 5 through part-toothed ring gauges with proof plug 7
Integrated end stop ring 8 6
Integrated end stop ring with 7 proofing plug 9
8 part-toe ring gear 10
9 non-full tooth toe ring with proofing plug 10
FIG. 10 integrated through the end plug 11
11 non-full gear through the end plug 12
Integrated end stop 12 plug 12
13 non-stop the whole tooth end plug 13
14 workpiece spline teeth Teeth ≤30 part-plug of teeth 15
15 gauge or thickness of the tooth space width tolerance position 17
16 odd large diameter gear plug detection 19
17 plug gauge tooth thickness detector 20
18 ring gauge space width detection 20
Figure A.1 and the effective length of the spline fit length 23
Figure B.1 smooth limit plug gauge 24
Figure B.2 smooth limit ring 24
Figure C.1 splined ring shape structure 25
Figure C.2 spline plug shape structure 26
Figure D.1 plug in the tooth thickness tolerance band and the workpiece spline space width tolerance zone 29
Figure D.2 rod diameter is calculated to detect the amount of plug gauge 29
Figure D.3 ring space width tolerance band and the workpiece external spline tooth thickness tolerance zone 33
Figure D.4 calculate the amount of ring gauge detecting rod diameter 34
Table 1 Symbol and Description 1
Table 2 gauge name, code, functions, features and the use of Rule 3
Table 3 through the end of the ring size parameters 5
Table 4-way ring gauges with proofing plug size parameters 6
Table 5 end-stop ring size parameters 8
Table 6 end stop ring with proofing plug size parameters 9
Table 7 through the end of the plug gauge size parameters 11
Table 8 size parameters only end plug 13
The minimum length of the table 9 gauge measuring section 14
Table 10 Non-full tooth gauge the number of teeth of two sector selection 14
Table 11 manufacturing tolerances and position element value 15
18 Table 12 individual tolerance
Table C.1 spline ring gauge Dimensions 25
Table C.2 spline plug dimensions 27
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The reference standard ISO 4156-3.2005 "Straight cylindrical involute splines (Metric module, side fit) - Part 3. Test" and
GB/T 3478.5-2008 "Straight cylindrical involute splines (Metric module, side fit) - Part 5. Inspection" in preparation.
This standard compared with GB/T 5106-2006, the main changes are as follows.
--- Added "part-toothed ring gauges pass", "part-toothed ring gauges pass with proof plug," "non-full gear through the end plug" Three Kinds of gauge;
--- An increase in the measurement of the workpiece spline path, external splines large diameter smooth limit gauge;
--- Increasing the gauge cumulative pitch tolerance (indexing tolerance) notes;
--- Increasing the gauge of test methods;
--- Original standard Appendices Appendix D A modified standard cost;
--- Increase in Appendix A "gauge usage rule controversial decision," Appendix B "measure workpiece spline path, external splines of the large diameter smooth pole
Limited regulation ", Appendix C" spline gauge shape the structure and size ";
--- Modify the original standard wrong, and made changes to the editorial.
The standard proposed by China Machinery Industry Federation.
The standard measuring instrument by the National Standardization Technical Committee (SAC/TC132) centralized.
This standard is drafted by. Heng Fung Tools Co., Ltd.
Participated in the drafting of this standard. Jiangsu Province Institute of Metrology, China Institute of Metrology, Chengdu Tool Research Institute Co., Ltd., Heiner iron
Fu shaft Co., Shanghai Automotive Transmission Co., Ltd.
The main drafters of this standard. Chen Ziyan, HE Qin Song, Xia Yongsheng, Yang Min Li, Lu promising, Jiang Zhigang, Goal Orientation, Zhao, Zhao Lin, Xu Jianxing.
This standard replaces the standards previously issued as follows.
--- GB/T 5106-1985, GB/T 5106-2006.
Straight cylindrical involute spline gauges
1 Scope
This standard specifies the Straight cylindrical involute spline gauges (hereinafter referred to as "gauge") terms and definitions, symbols and description, category, type
And size parameters, tolerances, requirements, and other test methods, marking and packaging.
This standard specifies the amount of regulation applicable to test GB/T 3478 prescribed pitch diameter ≤180mm spline. Pitch circle diameter
> 180mm or GB/T 3478 not specified spline, reference may be used.
2 Normative references
For this article the following documents are indispensable. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 1957-2006 smooth limit gauge the technical conditions
GB/T 3478 (all parts) Straight cylindrical involute splines (Metric module, side fit)
3 Terms and Definitions
Terms and definitions GB/T established in 3478.1 apply to this document.
4 Symbol and description
Table symbols and instructions listed in this document apply to 1.
Table 1 Symbol and description
Symbol Description Unit
z number of teeth -
m Modulus mm
αD standard pressure angle (°)
D pitch circle diameter mm
Db base diameter mm
DFemax workpiece external splines involute starting circle diameter maximum mm
Splined inner DFimin workpiece involute termination circle diameter minimum mm
Deemax workpiece external splines large diameter maximum mm
Dimin spline path within the workpiece minimum mm
|