|
US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 25669.1-2010: Tooling system for NC boring and milling machine -- Part 1: Designation
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 25669.1-2010 | English | 139 |
Add to Cart
|
3 days [Need to translate]
|
Tooling system for NC boring and milling machine -- Part 1: Designation
| Valid |
GB/T 25669.1-2010
|
PDF similar to GB/T 25669.1-2010
Basic data | Standard ID | GB/T 25669.1-2010 (GB/T25669.1-2010) | | Description (Translated English) | Tooling system for NC boring and milling machine -- Part 1: Designation | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J41 | | Classification of International Standard | 25.100 | | Word Count Estimation | 6,669 | | Date of Issue | 2010-12-23 | | Date of Implementation | 2011-07-01 | | Quoted Standard | GB/T 1443-1996; GB/T 3837-2001; GB/T 5342.1-2006; GB/T 6133.1-2006; GB/T 19449.1-2004; ISO 7388-1-2007; ISO 7388-2-2007; ISO 10643-2009; ISO 10897-1996; ISO 15488-2003; ISO 26622-1-2008; ISO 26623-1-2008; DIN 6360-1983 | | Regulation (derived from) | National Standard Approval Announcement 2010 No.10 (Total No.165) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the CNC boring and milling machine tool system model representation rules. This section applies to CNC boring and milling machine tool systems. | GB/T 25669.1-2010: Tooling system for NC boring and milling machine -- Part 1: Designation---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Tooling system for NC boring and miling machine Part 1. Designation
ICS 25.100
J41
National Standards of People's Republic of China
CNC boring and milling machine tool system
Part 1. Model presentation rules
Part 1. Designation
Issued on. 2010-12-23
2011-07-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 25669 "CNC boring and milling machine tool system" is divided into two parts.
--- Part 1. Model presentation rules;
--- Part 2. The types and dimensions.
This is Part 1 GB/T 25669 of.
This part is proposed by China Machinery Industry Federation.
This part of the tool by the National Standardization Technical Committee (SAC/TC91) centralized.
This part mainly drafted by. Chengdu Tool Research Institute, Chengdu into a tool Group Co., Ltd., Harbin Measuring & Cutting Tool Group, on
Sea Tools Factory Limited.
The main drafters of this section. Chen Shichang, Zhangtie Ming Zeng Yu ring, check States soldiers, Joe Tian, \u200b\u200bWeihua Liang, in Haihong, Liu Gang.
CNC boring and milling machine tool system
Part 1. Model presentation rules
1 Scope
This section GB/T 25669 specifies the CNC boring and milling machine tool system model representation rules.
This section applies to CNC boring and milling machine tool systems.
2 Normative references
The following documents contain provisions which, through reference GB/T 25669 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 1443-1996 and machine tool shank with clips from the cone (eqv ISO 296.1991)
GB/T 3837-2001 7.24 taper shank tool manually (eqv ISO 297. 1988)
GB/T 5342.1-2006 indexable face milling cutter - Part 1. nested face mill (ISO 6462. 1983, MOD)
GB/T 6133.1-2006 Weldon shank toolholders Part 1. Transmission of the tool shank size (ISO 5414-1.
2002, IDT)
GB/T 19449.1-2004 with flange contact surface of the hollow cone interfaces - Part 1. handle --- size (ISO 12164-1.
2001, IDT)
ISO 7388-1.2007 for automatic tool changers - Part tool shank taper 7.24 Part 1. A, AD, AF, U, UD and UF type
Shank sizes and codes
ISO 7388-2.2007 for automatic tool changers - Part tool shank taper 7.24 Part 2. J, JD and JF shank type and size
Code
Accessories Dimensions 2009 cutting tool. ISO 10643
ISO 10897.1996 with 1.10 taper of the collet chuck retainer
ISO 15488.2003 with a half cone angle of 8 ° retainer collet chuck
ISO 26622-1.2008 with a hollow cone ball tensioning system interfaces - Part 1. Shank sizes and codes
Part polygonal arc cone 2008 with flange contact surface interfaces - 1.. ISO 26623-1 shank sizes and codes
DIN6360. 1983 cutter with a large cone with a longitudinal groove cutter arbor sleeve jacket
Name and type of preparation 3
3.1 General Description
CNC boring and milling machine tool system referred to as TSG tool system.
TSG tool system tool model consists of three parts, separated by a horizontal line between the parts.
3.2 Model presentation rules
3.2.1 Part 1
Part 1 by 1 to 5 capital letters and symbols shank type, followed by ×× (digital) indicates the standard of a foot
Inch size, see Table 1.
|