|
US$234.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 10944.3-2013: Tools shanks with 7/24 taper for automatic tool changers -- Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 10944.3-2013 | English | 234 |
Add to Cart
|
3 days [Need to translate]
|
Tools shanks with 7/24 taper for automatic tool changers -- Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF
| Valid |
GB/T 10944.3-2013
|
PDF similar to GB/T 10944.3-2013
Basic data | Standard ID | GB/T 10944.3-2013 (GB/T10944.3-2013) | | Description (Translated English) | Tools shanks with 7/24 taper for automatic tool changers -- Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J41 | | Classification of International Standard | 25.100.01 | | Word Count Estimation | 12,124 | | Older Standard (superseded by this standard) | GB/T 10945.1-2006 | | Quoted Standard | ISO 2768-1; ISO 2768-2; ISO 8015; ISO 1629 | | Adopted Standard | ISO 7388-3-2007, IDT | | Regulation (derived from) | National Standards Bulletin 2013 No. 27 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the ATC 7: 24 taper shank tools with AC, AD, AF, UC, UD, UF, JD and JF type rivets size, it fits in with a tool from the magazine to the spindle or delivery use transported from the spindle to the automatic tool changer machine too | GB/T 10944.3-2013: Tools shanks with 7/24 taper for automatic tool changers -- Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Tools shanks with 7/24 taper for automatic tool changers Part 3.. Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF
ICS 25.100.01
J41
National Standards of People's Republic of China
Replacing GB/T 10945.1-2006
ATC tool shank taper 7.24
Part 3. AC, AD, AF, UC, UD, UF, JD
And JF Type Rivet
Part 3. Retentionknobsforshanksofforms
AC, AD, AF, UC, UD, UF, JDandJF
(ISO 7388-3.2007, IDT)
Issued on. 2014-10-01 2013-12-31 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 10944 "ATC 7.24 cone tool shank" is divided into five sections.
--- Part 1. A, AD, AF, U, UD and UF type shank dimensions and marking;
--- Part 2. J, JD and JF type shank dimensions and marking;
Part --- Section 3. AC, AD, AF, UC, UD, UF, JD and JF type Rivet;
--- Part 4. handles the technical conditions;
--- Part 5. Rivet technical conditions.
This section GB/T Part of 310,944.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This Part replaces GB/T 10945.1-2006 "automatic tool changer with 7.24 taper tool shank -40,45 and 50 of the first handle with rivets
Part 1. Dimensions and mechanical properties ", compared with the GB/T 10945.1-2006, the main technical changes are as follows.
--- Modify the name in English;
--- Modify the scope;
--- Modify the normative references;
--- Adds new JD type shown and rivet dimensions;
--- Increased by 30 and 60 with a rivet tool shank;
--- Increasing the size of some of the tool shank No. 40,45,50 with pull nail;
--- Increased AF, UF, JF type rivets without central cooling holes;
--- Increased rivet holes with data chip;
--- Increasing the O-ring information;
--- Increasing the mark;
--- Remove the maximum tension applied to pull the nail.
This section uses the translation method identical with ISO 7388-3.2007 "ATC machine tool taper shank 7/24 --- Part 3.
AC, AD, AF, UC, UD, UF, JD and JF type Rivet "(in English).
Consistency correspondence between this part of international documents and normative references of our files are as follows.
--- GB/T 1804-2000 General tolerances Tolerances for linear and angular dimensions without individual tolerance (eqv ISO 2768-1. 1989);
--- GB/T 1184-1996 shape and position tolerances without individual tolerance value (eqv ISO 2768-2. 1989);
--- GB/T 4249-2009 Geometrical product specifications (GPS) principles of tolerance (ISO 8015. 1985, MOD);
--- GB/T 5576-1997 rubber and latex nomenclature (idt ISO 1629.1995).
This part of ISO 7388-1.2007 compared to modify the following editorial.
--- Chapter 1 replaced by AC A (A handle is a model, does not match the full text).
This part is proposed by China Machinery Industry Federation.
This part of the tool by the National Standardization Technical Committee (SAC/TC91) centralized.
This section is responsible for drafting unit. Chengdu into a tool Group Co., Ltd. Chengdu Tool Research Institute.
The main drafters of this section. Chen Li, Tian Lixin, Chen Shichang, Zeng Yu ring.
This part of the standard replaces the previous editions are.
--- GB/T 10945-1989, GB/T 10945.1-2006.
ATC tool shank taper 7.24
Part 3. AC, AD, AF, UC, UD, UF, JD
And JF Type Rivet
1 Scope
This section GB/T 10944 specifies the ATC 7.24 taper tool holder with AC, AD, AF, UC, UD, UF, JD and JF
Type rivets the size of which is adapted to having a transport tool from the magazine to the spindle or transporting the tool from the spindle to the magazine automatic clamping system
Use the conventional automatic tool change. These tools are designed to handle the most important dimensions in line with ISO 9270 end of the spindle.
This section applies to automatic tool change tool shank taper 7.24.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
ISO 2768-1 General tolerances - Part 1. No NOTE tolerances for linear and angular tolerances (Generaltolerances-Part 1. Tol-
erancesforlinearandangulardimensionswithoutindividualtoleranceindications)
ISO 2768-2 General tolerances - Part 2. No individual tolerance components of geometric tolerances (Generaltolerances-Part 2.
Geometricaltolerancesforfeatureswithoutindividualtoleranceindicationsfirstedition; CENEN
22768-2.1993)
ISO 8015 Technical drawings - tolerancing basic principles (Technicaldrawings-Fundamentaltolerancingprinci-
ple)
ISO 1629 Rubber and latex named (Rubberandlatices-Nomenclature)
3 Dimensions
3.1 General provisions
All dimensions and tolerances are in millimeters, tolerance according to ISO 8015, ISO 2768-1 did not note tolerance press the "m" level and press
ISO 2768-2 of "k" level.
3.2 AD-type screws, center with cooling holes
Figure 1 and Table 1.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 10944.3-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 10944.3-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 10944.3-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 10944.3-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|