|
Std ID |
Description (Standard Title) |
|
GB/T 32180.5-2015
|
Financial information technology -- Data interface of enterprise resource planning software -- Part 5: Budget
|
|
GB/T 32180.6-2015
|
Financial information technology -- Data interface of enterprise resource planning software -- Part 6: Treasury
|
|
GB/T 32181-2015
|
Aluminium alloy welding wires for railway application
|
|
GB/T 3218-1982
|
Specification and testing for 5D general purpose containers
|
|
GB/T 32182-2015
|
Aluminium and aluminium alloy plates and sheets for railway application
|
|
GB/T 32183-2015
|
Aluminium strips for computer-to-printing plates
|
|
GB/T 10580-1989
|
Standard conditions for use prior to and during the testing of solid insulating materials
|
|
GB/T 10580-2003
|
Standard conditions of the solid insulating material before the test and test
|
|
GB/T 32186-2015
|
Test methods of cleanliness of aluminium and aluminium alloy ingots
|
|
GB/T 32187-2015
|
General specification for chemical agent alarm
|
|
GB/T 32188-2015
|
Test method for full width at half maximum of double crystal X-ray rocking curve of GaN single crystal substrate
|
|
GB/T 32189-2015
|
Test method for surface roughness of GaN single crystal substrate by atomic force microscope
|
|
GB/T 32190-2015
|
Standard practice for using flame photometric detectors in gas chromatography
|
|
GB/T 32191-2015
|
Leakage current tester
|
|
GB/T 3219-1995
|
Specification and testing for 1CC, 1C and 1CX general pose containers
|
|
GB/T 32192-2015
|
Withstanding voltage tester
|
|
GB/T 32193-2015
|
Standard practice for testing flame ionization detectors used in gas or supercritical fluid chromatography
|
|
GB/T 32194-2015
|
Hand-held digital multimeters
|
|
GB/T 32195-2015
|
Non-destructive testing instruments -- Quality inspection provisions
|
|
GB/T 32196-2015
|
Non-destructive testing instruments -- Model designation method
|
|
GB/T 32197-2015
|
Robot controller open communication interface profile
|
|
GB/T 32198-2015
|
Standard practice for general techniques of infrared quantitative analysis
|
|
GB/T 32199-2015
|
Standard practice for general techniques for obtaining infrared spectra for qualitative analysis
|
|
GB/T 32200-2015
|
Characteristic parameter and measurement of projection screens
|
|
GB/T 32201-2015
|
Gas meters
|
|
GB/T 3220-1982
|
Dimensional and capacity series for freight container spreader
|
|
GB/T 3220-2011
|
Freight Container Spreader
|
|
GB/T 32202-2015
|
Functional safety of safety instrumented system in oil and gas pipelines -- Assessment code
|
|
GB/T 32203-2015
|
Functional safety of safety instrumented system in oil and gas pipelines -- Acceptance code
|
|
GB/T 32204-2015
|
Industrial process calibrator
|
|
GB/T 32205-2015
|
Standard practice for testing thermal conductivity detectors used in gas chromatography
|
|
GB/T 32206-2015
|
Standard practice for testing electrolytic conductivity detectors used in gas chromatography
|
|
GB/T 32207-2015
|
Standard practice for use of electron-capture detectors in gas chromatography
|
|
GB/T 32208-2015
|
Chemical oxygen demand meters
|
|
GB/T 32209-2015
|
Poly-component deleterious gas detection alarm
|
|
GB/T 32210-2015
|
Technical requirements and test methods for portable gas chromatography-mass spectrometer
|
|
GB/T 32211-2015
|
Standard practice for testing variable-wavelength photometric detectors used in liquid chromatography
|
|
GB/T 3221-1996
|
Code for dock and sea trials of diesel-driven inland ships
|
|
GB/T 3221-2010
|
Code for dock and sea trials of diesel-driven inland ships
|
|
GB/T 32212-2015
|
Standard practice for testing fixed-wavelength photometric detectors used in liquid chromatography
|
|
GB/T 32213-2015
|
Information security technology -- Public key infrastructure -- Specification for remote password authentication and key establishment
|
|
GB/T 32214.2-2015
|
Information technology -- Generic applications of ASN.1 -- Part 2: Fast Web Services
|
|
GB/T 32215-2015
|
Pneumatic fluid power -- Identification of ports and control mechanisms of control valves and other components
|
|
GB/T 32216-2015
|
Hydraulic fluid power -- Test method for the proportional/servo controlled hydraulic cylinder
|
|
GB/T 32217-2015
|
Hydraulic fluid power -- Sealing devices -- Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications
|
|
GB/T 32218-2015
|
Vacuum technology -- Test methods for leak rates of vacuum system
|
|
GB/T 32219-2015
|
Cylinder mill -- Cast grinding cylpebs
|
|
GB/T 3222.1-2006
|
Acoustics -- Description, measurement and assessment of environmental noise -- Part 1: Basic quantities and assessment procedures
|
|
GB/T 3222.2-2009
|
Acoustics -- Description, measurement and assessment of environmental noise -- Part 2: Determination of environmental noise levels
|
|
GB/T 32220-2015
|
Taper bush -- Types, size and basic parameters
|
|
GB/T 32221-2015
|
Vacuum technology -- Vacuum thermal environmental simulation test equipment of spacecraft -- General specification
|
|
GB/T 3222-1994
|
Acoustics--Measurement method of environmental noise
|
|
GB/T 32222-2015
|
Remanufactured internal combustion engine -- General specifications
|
|
GB/T 32223-2015
|
Building hardware for windows and doors -- General requirements
|
|
GB/T 32224-2015
|
Heat meters
|
|
GB/T 32225-2015
|
Technical specification of evaluation for agricultural science and technology achievements
|
|
GB/T 32226-2015
|
Specific solid enzyme (ALD, TIM, GDH) reagent for determination of fructose diphosphate (FDP)
|
|
GB/T 32227-2015
|
Work lifejackets for ship
|
|
GB/T 32228-2015
|
Ships and marine technology -- Pyrotechnic life-saving appliance -- Testing, inspection and marking of production units
|
|
GB/T 32229-2015
|
Road test methods for all-terrain vehicles
|
|
GB/T 32230-2015
|
Guidelines for quality culture development in enterprises
|
|
GB/T 32231-2015
|
General technical specifications of engine used for all-terrain vehicles
|
|
GB/T 3223-1994
|
Acoustics. Free-field calibration method of underwater sound transducers
|
|
GB/T 32232-2015
|
Marine child-lifejacket
|
|
GB/T 32233-2015
|
Technical requirement for the pavement management system
|
|
GB/T 32234.7-2015
|
Personal flotation devices -- Part 7: Materials and components -- Safety requirements and test methods
|
|
GB/T 32234.8-2015
|
Personal flotation devices -- Part 8: Accessories -- Safety requirements and test methods
|
|
GB/T 32236-2015
|
Integrated data management framework of product middle-term lifecycle cored on BOM structure
|
|
GB/T 32237-2015
|
Sprat dryer for the extract of traditional Chinese medicine
|
|
GB/T 32238-2015
|
General steel castings suitable for low temperature and high pressure service
|
|
GB/T 32239-2015
|
Chinese medicine pill making machine
|
|
GB/T 32240-2015
|
Automatic milking installations -- Requirements and testing
|
|
GB/T 32241-2015
|
Equipment for crop protection -- Methods for the laboratory measurement of spray drift -- Wind tunnels
|
|
GB/T 32242.1-2015
|
Equipment for crop protection -- Induction hopper -- Part 1: Test methods
|
|
GB/T 32242.2-2015
|
Equipment for crop protection -- Induction hopper -- Part 2: General requirements and performance limits
|
|
GB/T 32243-2015
|
Equipment for crop protection -- Sprayer filters -- Colour coding for identification
|
|
GB/T 32244-2015
|
Crop protection equipment -- Field measurement of spray distribution in tree and bush crops
|
|
GB/T 32245-2015
|
Numerical control system of machine tool -- Reliability test and evaluation
|
|
GB/T 32246-2015
|
GH 141 alloy forgings -- General specification
|
|
GB/T 32247-2015
|
Ferritic ductile iron castings suitable for low temperature service
|
|
GB/T 32248-2015
|
Superstrength alloy steel forgings -- General specifications
|
|
GB/T 32249-2015
|
Aluminum and aluminum-alloy die forgings, hand forgings and rolled ring forgings -- General specification
|
|
GB/T 32250.2-2015
|
Inspection of sprayers in use -- Part 2: Field crop sprayers
|
|
GB/T 32250.3-2015
|
Inspection of sprayers in use -- Part 3: Air-assisted sprayers for bush and tree crops
|
|
GB/T 32251-2015
|
Investment casting process -- Pollutants control
|
|
GB/T 32252-2015
|
Investment casting process -- General technology guidelines
|
|
GB/T 32253-2015
|
Precision hot forging of straight bevel gear -- Structural design specification
|
|
GB/T 32254-2015
|
Precision hot forging of straight bevel gear -- General specifications
|
|
GB/T 10580-2015
|
Standard conditions for use prior to and during the testing of solid electrical insulating materials
|
|
GB/T 32256-2015
|
Steel forgings for rings for reduction gears -- General specification
|
|
GB/T 32257-2015
|
Qualification testing of welders for fusion welding on nickel and nickel alloys
|
|
GB/T 10581-1989
|
Method of test for insulation resistance and volume resistivity of insulating materials at elevated temperature
|
|
GB/T 10581-2006
|
Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures
|
|
GB/T 10582-1989
|
Test methods for determining electrolytic corrosion with insulating materials
|
|
GB/T 32260.2-2015
|
Destructive tests on welds in metallic materials -- Cold cracking tests for weldments -- Arc welding processes -- Part 2: Self-restraint tests
|
|
GB/T 32260.3-2015
|
Destructive tests on welds in metallic materials -- Cold cracking tests for weldments -- Arc welding processes -- Part 3: Externally load tests
|
|
GB/T 32261.2-2015
|
Usability of consumer products and products for public use -- Part 2: Summative test method
|
|
GB/T 32262-2015
|
Preparation of deoxyribonucleic acid sample for atomic force microscope measurement
|
|
GB/T 32263-2015
|
Highly purified compound -- Reagent for pesticide residue analysis -- Method of the gas chromatography with electron capture detector (ECD)
|
|
GB/T 32264-2015
|
Method of performance testing for gas chromatography-single quadrupole mass spectrometry
|