GB/T 32260.2-2015 English PDF

US$399.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32260.2-2015: Destructive tests on welds in metallic materials -- Cold cracking tests for weldments -- Arc welding processes -- Part 2: Self-restraint tests
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 32260.2-2015	399	Add to Cart	4 days	Destructive tests on welds in metallic materials -- Cold cracking tests for weldments -- Arc welding processes -- Part 2: Self-restraint tests	Valid

Similar standards

GB/T 29712   GB/T 34628   GB/T 32260.1   GB/T 32257   GB/T 32260.3   

Basic data

Standard ID: GB/T 32260.2-2015 (GB/T32260.2-2015)
Description (Translated English): Destructive tests on welds in metallic materials -- Cold cracking tests for weldments -- Arc welding processes -- Part 2: Self-restraint tests
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J33
Classification of International Standard: 25.160.40
Word Count Estimation: 19,139
Date of Issue: 2015-12-10
Date of Implementation: 2016-07-01
Regulation (derived from): National Standard Announcement 2015 No.38
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 32260.2-2015: Destructive tests on welds in metallic materials -- Cold cracking tests for weldments -- Arc welding processes -- Part 2: Self-restraint tests

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Destructive tests on welds in metallic materials-Cold cracking tests for weldments-Arc welding processes - Part 2. Self-restraint tests ICS 25.160.40 J33 National Standards of People's Republic of China Destructive tests on welds in metallic materials Cold cracking test method for welding weldment Part 2. Self-restraint tests Arcweldingprocesses-Part 2. Self-restrainttests (ISO 17642-2.2005, MOD) Issued on. 2015-12-10 2016-07-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Test parameter names and symbols 1 Principle 2 5 5.1 Overview 2 5.2 Qualitative assessment 2 5.3 Quantitative Evaluation 2 6 Test 2 6.1 CTS Test 2 6.2 Tekken (oblique Y-groove) test and the Caspian Sea (U-groove) Test 8 7 13 test reports Appendix A (Informative Appendix) CTS 14 Test Report Annex B (informative) Tekken (or the Caspian Sea) Test Report 15

Foreword

GB/T 32260 "cold crack test welds in metallic materials welding methods Destructive tests weldment" is divided into three parts. --- Part 1. General; --- Part 2. Self-restraint tests; --- Part 3. external load test. This section GB/T Part of 232,260. This section drafted in accordance with GB/T 1.1-2009 given rules. This section uses redrafted Law Amendment uses ISO 17642-2.2005 "Destructive tests on welds in metallic materials weldment cold cracks Arc test methods - Part 2. Self-restraint tests. " This part of ISO 17642-2.2005 and its technical differences for the following reasons. --- On normative references, this part has been adjusted technical differences, in order to adapt our technical conditions. Adjustment situation Focus is reflected in the status of Chapter 2, "Normative references", the specific adjustments are as follows. ● increase the GB/T 3375 "Welding terms"; ● The ISO 17642-2.2005 standard of international and European standards cited, instead of using the corresponding standard. This part of ISO 17642-2.2005, compared the structure to reduce the appendix ZA. This part of the National Welding Standardization Technical Committee (SAC/TC55) and focal points. This section is drafted. Harbin Welding Research Institute, Department of Shipbuilding Equipment Co., Ltd. St. Dongguan future Laser Technology Co., Ltd., Shanghai Special Equipment Inspection Technology Research Institute, Chinese Academy of Oil and Gas Pipeline, China Special Equipment Inspection and Research Institute, Tianjin gold Bridge Welding Materials Group Co., Ltd. Drafters of this section. Wang Kenan, Su Jinhua, Zhang, Dai Hai, Xu Bin, Suiyong Li, Shi Kun, Yang Yongmei, Pudong Guang. Destructive tests on welds in metallic materials Cold cracking test method for welding weldment Part 2. Self-restraint tests

1 Scope

GB/T 32260 provisions of this section, the following self-restraint cold cracking test specimen size, sampling requirements, test procedures and evaluation methods. --- CTS (controlled thermal strength) test; --- Tekken (oblique Y-groove) or the Caspian Sea (U-groove) test. This section applies to (but not limited to) carbon and low alloy steel weld cold cracking susceptibility assessment.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 2654 welded joint hardness test method (GB/T 2654-2008, ISO 9015-1.2001, IDT) GB/T 3375 Welding terminology GB/T 3965 deposited metal diffusible hydrogen determination method (GB/T 3965-2012, ISO 3690.2000, MOD) GB/T 26955 Destructive tests on welds in metallic materials weld macroscopic and microscopic examination (GB/T 26955-2011, ISO 17639. 2003, MOD) Cold welding crack test methods - Part 1 GB/T 32260.1 Destructive tests on welds in metallic materials weldment. General (GB/T 32260.1-2015, ISO 17642-1.2004, MOD)

3 Terms and Definitions

Terms and definitions GB/T 3375 and GB/T 32260.1 defined apply to this document. Names and symbols 4 test parameters Names and symbols of test parameters are shown in Table 1. Table 1 Name and Symbol Symbol Name Unit CTS (to control heat intensity) test t Material thickness mm LV size of fillet (vertical) mm LH weld leg size (transverse) mm L length mm test weld ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 32260.2-2015_English be delivered?

Answer: Upon your order, we will start to translate GB/T 32260.2-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 32260.2-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 32260.2-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.