GB/T 32192-2015 English PDF

US$609.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32192-2015: Withstanding voltage tester
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 32192-2015	609	Add to Cart	5 days	Withstanding voltage tester	Valid

Similar standards

GB 4793   GB/T 34067.2   GB/T 18216.8   GB/T 18216.12   GB/T 32191   

Basic data

Standard ID: GB/T 32192-2015 (GB/T32192-2015)
Description (Translated English): Withstanding voltage tester
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: N20
Classification of International Standard: 17.220.20
Word Count Estimation: 29,216
Date of Issue: 2015-12-10
Date of Implementation: 2016-07-01
Regulation (derived from): National Standard Announcement 2015 No.38
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 32192-2015: Withstanding voltage tester

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Withstanding voltage tester ICS 17.220.20 N20 National Standards of People's Republic of China Withstand voltage tester 2015-12-10 released 2016-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released Directory Preface III Introduction IV 1 Scope 1 2 normative reference document 1 3 Terms and definitions 2 4 Product Category 3 5 requirements 3 6 Test Method 10 7 Inspection rules 17 Marking, packaging, transportation and storage Appendix A (normative appendix) Representation of maximum permissible error and calculation formula for error 21 Appendix B (Normative Appendix) Test items and recommended test sequence

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009. Please note that some of the contents of this document may involve patents. The issuer of this document does not assume responsibility for the identification of these patents. This standard is proposed by the China Machinery Industry Federation. This standard by the National Electrotechnical Instrumentation Standardization Technical Committee (SAC/TC104) centralized. The drafting of this standard. Shandong Institute of Metrology, Shanghai Institute of Instrument and Instrument, Zhejiang Xianheng International General Equipment Co., Ltd., Qingdao Ainuo Intelligent Instrument Co., Ltd., Zhejiang Institute of Metrology, Suzhou City Weiming Electronic Instrument Co., Ltd., Guangzhou, the new electrical appliances Equipment factory. The main drafters of this standard. Wang Xinjun, Zhang Qin, Teng Huaqiang, Wang Laixing, Wang Yansong, Luo Jin, Hou Diancheng, Wu Yonghui, Wu Xingguang, Yang Zhifeng, Wu Weihua, Xu Mingjie, Zhou Chao.

Introduction

In order to standardize the quality behavior of the withstand voltage tester manufacturing industry, to ensure the use of withstand voltage tester test to verify a variety of electrical equipment, insulation Materials and insulation structure of the insulation (dielectric) strength requirements of the ability to withstand the performance and function of the voltage tester to make more and more important To this is due to. Detection equipment defects, to ensure the insulation performance of the device, which is directly related to the safety performance of the product, related to the user's personal Safety; Almost every safety standard is cited; Scientific and technological progress (AC and DC withstand voltage tester, measurement characteristics and control functions, etc.); End user requirements (cost savings, compliance with all aspects of product standards, etc.); Safety and maintenance of coherence; Sustainable development requirements, for example, resistance to voltage measurement is considered the basic elements of safety management, as China's mandatory product certification Part of this request. Currently on the market there are resistance to the voltage tester has different characteristics, need to have a common reference system. So need to have a new one Of the standard to help end users on the performance, functional control to make a choice to explain the various signs. This standard is a specification and description of a withstand voltage tester As well as assessing its performance provides a basis. Withstand voltage tester

1 Scope

This standard specifies the terminology and definitions, classification, requirements, inspection methods, inspection rules, marking, packaging, shipping and Storage. This standard applies to the maximum output voltage of not more than 15kV digital display and analog (pointer) instructions of the AC (frequency) and DC The withstand voltage tester (hereinafter referred to as the "tester") is also applicable to the withstand voltage part of other test equipment which meets the above conditions. This standard does not apply to the inter-turn impulse voltage tester and other output voltage for the pulse voltage or transient voltage voltage test equipment.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. GB/T 191-2008 Packaging and storage icon (ISO 780..1997, MOD) GB/T 2423.1-2008 Environmental testing for electric and electronic products - Part 2. Test methods - Test A. Low temperature (IEC 60068-2- 1..2007, IDT) GB/T 2423.2-2008 Environmental testing for electric and electronic products - Part 2. Test methods - Test B. High temperature (IEC 60068-2- 2..2007, IDT) GB/T 2423.4-2008 Environmental testing for electric and electronic products - Part 2. Test methods - Test Db. alternating damp heat (12 h 12h cycle) (IEC 60068-2-30..2005, IDT) GB/T 2423.5-1995 Environmental testing for electric and electronic products - Part 2. Test methods - Test Ea and guidance. Impact (IEC 60068-2-27. 1987, IDT) GB/T 2423.10-2008 Environmental testing for electric and electronic products - Part 2. Test methods - Test Fc. Vibration (sinusoidal) (IEC 60068-2-6..1995, IDT) GB/T 2423.22-2012 Environmental tests - Part 2. Test methods - Test N. Temperature change (IEC 60068-2-14. 2009, IDT) GB 4208-2008 enclosure protection class (IP code) (IEC 60529..2001, IDT) GB 4793.1-2007 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 1. General requirements (IEC 61010 - 1..2001, IDT) GB 4824-2013 Industrial, scientific and medical (ISM) RF equipment Disturbance characteristics Limits and measurement methods (CISPR11- 2003, IDT) GB/T 6587-2012 General specification for electronic measuring instruments General rules for the use of industrial products GB/T 9969-2008 Reliability test of electronic measuring instruments GB/T 11463-1989 General technical requirements for packaging of electromechanical products GB/T 13384-2008 Reliability requirements and test methods for digital communication equipment GB/T 13426-1992 GB/T 16511-1996 Electrical documentation for electrical and electronic measuring equipment (IEC 1187..1993, IDT) GB/T 17626.2-2006 Electromagnetic compatibility test and measurement techniques Electrostatic discharge immunity test (IEC 61000-4-2..2001, IDT) ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 32192-2015_English be delivered?

Answer: Upon your order, we will start to translate GB/T 32192-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 32192-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 32192-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.