GB/T 32198-2015 English PDF

US$659.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32198-2015: Standard practice for general techniques of infrared quantitative analysis
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 32198-2015	659	Add to Cart	6 days	Standard practice for general techniques of infrared quantitative analysis	Valid

Similar standards

GB/T 40219   GB/T 25929   GB/T 25930   GB/T 32208   GB/T 32199   

Basic data

Standard ID: GB/T 32198-2015 (GB/T32198-2015)
Description (Translated English): Standard practice for general techniques of infrared quantitative analysis
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: N53
Classification of International Standard: 71.040.10
Word Count Estimation: 31,388
Date of Issue: 2015-12-10
Date of Implementation: 2016-07-01
Regulation (derived from): National Standard Announcement 2015 No.38
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 32198-2015: Standard practice for general techniques of infrared quantitative analysis

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Standard practice for general techniques of infrared quantitative analysis ICS 71.040.10 N53 National Standards of People's Republic of China Infrared spectroscopy technique General Issued on. 2015-12-10 2016-07-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms, definitions and symbols 1 General Description 4 1 5 Equipment 1 6 Hazard 2 7 Infrared Quantitative Analysis Note 2 test 8 Single Component Analysis Theory 2 9 single-component working curve drawing 3 10 4-component analysis theory More than 11 component solution analysis 4 12 5 Baseline 13 single-band measurements 5 14 baseline method 6 15 non-solution analysis 7 16 spectral subtraction 8 Calculation Method 9 17 18 Beer's Law curvature correction in FIG. 10 Statistical evaluation 19 10 Appendix A (normative) Operation Guide 12 References 23

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard reference adopted ASTME168-2004 "infrared spectroscopy technique General." The standard proposed by China Machinery Industry Federation. Control and automation Standardization Technical Committee (SAC/TC124) is under the jurisdiction of this standard is measured by the country's industrial processes. This standard was drafted. China Instrument Industry Association, Peking University, Beijing Huayun Institute for the Analysis Instrument Co., Ltd., Beijing China Kechuang Instrument Technology Co., Ltd., Beijing Agricultural College, Beijing Analytical Instrument Institute. The main drafters of this standard. Maya Juan, Ong Fu, elevation up to, Tang Qingyun, Zhang Xinmin, Louxing Jun. Infrared spectroscopy technique General

1 Scope

1.1 standard specifies the infrared quantitative analysis of the most common technique, with and without the use of computer data collection and analysis of data related to terms Content. 1.2 This standard does not involve security issues relating to the actual use of the process. Users are, shall determine the limitations of the standard applications, and We have the responsibility to develop appropriate safety and health practices. For safe handling, see Chapter 6 and A.4.5.1.3, Notes 1, A.4.6.1.3 in A.5.6 in Note 1 and Note 1.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. ASTME131 molecular spectroscopy related terms (TerminologyRelatingtoMolecularSpectroscopy) ASTME334 infrared microanalysis General Technology (PracticesforGeneralTechniquesofInfraredMicroanaly- sis) ASTME932 dispersive infrared spectroscopy characterization and measurement performance (PracticeforDescribingandMeasuringPer- formanceofDispersiveInfraredSpectrometers) ASTME1252 infrared spectroscopy qualitative analysis General (PracticeforGeneralTechniquesforObtainingIn- fraredSpectraforQualitativeAnalysis) ASTME1421 Fourier transform infrared (FT-IR) to characterize and measure the performance of the spectrometer. 0 and Level 1 is filled with zeros [Practice forDescribingandMeasuringPerformanceofFourierTransformInfrared (FT-IR) Spectrometers. LevelZeroandLevelOne] ASTME1655 infrared multivariate quantitative analysis techniques General (PracticesforInfraredMultivariateQuantitativeAnalysis) 3 Terms, definitions and symbols Terms, definitions and symbols ASTME131 defined apply to this document.

4 General Description

This standard provides a set for all IR workers from preparation, infrared spectroscopy analysis of the operation to calculate the guidance technology.

5 device

Premise 5.1 standard analytical techniques described in the infrared is that the quality of the instrument should not only meet the common commercial standards, but also meet the Manufacturer's specifications. Dispersive Fourier transform instruments and apparatus respectively refer ASTME1421 and ASTME932, microanalysis See ASTME334. 5.2 In developing a new spectroscopic methods, the researchers should describe repeatability and bias performance used equipment and instrumentation, the method can ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 32198-2015_English be delivered?

Answer: Upon your order, we will start to translate GB/T 32198-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 32198-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 32198-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.