GB/T 32240-2015 English PDF

US$374.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32240-2015: Automatic milking installations -- Requirements and testing
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 32240-2015	374	Add to Cart	3 days	Automatic milking installations -- Requirements and testing	Valid

Similar standards

GB/T 24674   LY/T 3022   GB/T 33006   GB/T 14290   GB/T 37924   

Basic data

Standard ID: GB/T 32240-2015 (GB/T32240-2015)
Description (Translated English): Automatic milking installations -- Requirements and testing
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: B92
Classification of International Standard: 65.040.10
Word Count Estimation: 19,150
Date of Issue: 2015-12-10
Date of Implementation: 2016-07-01
Quoted Standard: GB 4208-2008; GB 5226.1-2008; GB/T 15706.1-2007; GB/T 15706.2-2007; GB/T 9480-2001; GB/T 5981-2011; GB/T 3766-2001; GB/T 7932- 2003; GB/T 8186-2011; GB/T 25078.1-2010; GB/T 25078.2-2010; ISO 13852-1996; GB 19891-2005; GB/T 5023.1-2008; GB/T 5013.1-2008; IEC 60825- 1-2001; GB 14048.4-2010; GB 14048.5-2008; GB/T 12668.1-2002; EN 1088; EN 13732
Adopted Standard: ISO 20966-2007, IDT
Regulation (derived from): National Standard Announcement 2015 No.38
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies automatic milking equipment (AMI) structural requirements, in addition to the requirements of ISO 5707 and ISO 6690 are described, but also includes specific safety, health, and performance requirements and test methods. This standard does not contain requirements for the design of milking equipment installation site.

GB/T 32240-2015: Automatic milking installations -- Requirements and testing

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Automatic milking installations - Requirements and testing ICS 65.040.10 B92 National Standards of People's Republic of China Automatic milking equipment requirements and test methods (ISO 20966.2007, IDT) Issued on. 2015-12-10 2016-07-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard is identical with ISO 20966.2007 "Automatic milking equipment requirements and test methods." Correspondence between the consistency of the standards of international documents and normative references of the following documents. --- GB/T 3766-2001 Hydraulic System General technical conditions (ISO 4413.1998, EQV); --- GB/T 5013.1-2008 rated voltage of 450/750V and below rubber insulated cables - Part 1. General To Seek (IEC 60245-1.2003, IDT); --- GB/T 5023.1-2008 rated voltage of 450/750V and below PVC insulated cables - Part 1. General requirements (IEC 60227-1.2007, IDT); --- GB/T 5981-2011 milking equipment - Vocabulary (ISO 3918.2007, IDT); --- GB/T 7932-2003 Pneumatic system General technical conditions (ISO 4414.1998, IDT); --- GB/T 8186-2011 milking equipment structure and properties (ISO 5707.2007, IDT); --- GB/T 9480-2001 agricultural and forestry tractors and machinery, lawn and garden equipment manuals - Regulation Then (ISO 3600.1996, EQV); --- GB/T 12668.1-2002 Adjustable speed electrical power drive systems - Part 1. General requirements for low-voltage DC speed electric drivetrain Rating system requirements (IEC 61800-1.1997, IDT); --- GB 14048.4-2010 Low-voltage switchgear and control equipment - Part 4-1. Contactors and motor starters electromechanical Contactors and motor starters (including motor protection) (IEC 60947-4-1.2009, IDT); --- GB 14048.5-2008 Low-voltage switchgear and control equipment - Part 5-1. Control circuit devices and switching elements Machine Electrical control circuit devices (IEC 60947-5-1.2003, MOD); --- GB 19891-2005 Safety of machinery designed for hygiene requirements (ISO 14159.2002, MOD); --- GB/T 25078.1-2010 Acoustics low-noise machinery and equipment design and implementation of the recommendations - Part 1. Planning (ISO /T R11688-1.1995, IDT); --- GB/T 25078.2-2010 Acoustics low-noise machinery and equipment design and implementation of the recommendations - Part 2. Low Noise Design Matter Doctrinal Foundation (ISO /T R11688-2.1998, IDT). The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee (SAC/TC201) Agricultural machinery centralized. This standard was drafted. Chinese Academy of Agricultural Mechanization Sciences, Ministry of Agriculture, Agricultural Machinery Testing Station. Drafters of this standard. Emperor before entering, Chen Fengqi, Lin Yuhan, Jin Hongwei, Zhang Jian. Automatic milking equipment requirements and test methods Warning. Some of the test methods specified in this standard may result in a hazardous situation occurs. Operations personnel to perform tests of this standard shall be opened Show the type of work training. Automatic milking equipment consumers are responsible for monitoring the implementation of national regulations and safety and health requirements.

1 Scope

This standard specifies automatic milking equipment (AMI) structural requirements, in addition to the requirements of ISO 5707 and ISO 6690 are described, but also includes Specific safety, health, and performance requirements and test methods. This standard does not contain requirements for the design of milking equipment installation site.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB 4208-2008 housing protection (IP Code) (IEC 60529.2001, IDT) GB 5226.1-2008 Safety of machinery - Electrical machinery and electrical equipment - Part 1. General requirements (IEC 60204-1.2005, IDT) GB/T 15706.1-2007 Safety of machinery - Basic concepts, general principles for design - Part 1. Basic terminology and square Method (ISO 12100-1.2003, IDT) GB/T 15706.2-2007 Safety of machinery - Basic concepts, general principles for design - Part 2. Technical principles (ISO 12100-2.2003, IDT) ISO 3600 Tractors and machinery for agriculture and forestry, powered lawn and garden equipment - Operator 's manuals (Tractorsmachinery foragricultureandforestry, poweredlawnandgardenequipment-Operator'smanuals-Contentand presentation) ISO 3918 milking apparatus vocabulary (Milkingmachineinstalations-Vocabulary) ISO 4413 General technical conditions for hydraulic power systems (Hydraulicfluidpower-Generalrulesrelatingtosys- tems) ISO 4414 pneumatic systems General technical conditions (Pneumaticfluidpower-Generalrulesrelatingtosystems) ISO 5707 milking equipment Structure and Properties (Milkingmachineinstalations-Constructionandperform- ance) ISO /T R11688-1 low - noise machinery and equipment design and implementation of the recommendations - Part 1. Planning (Acoustics-Recom- mendedpracticeforthedesignoflow-noisemachineryandequipment-Part 1. Planning) ISO /T R11688-2 low - noise machinery and equipment design and implementation of the recommendations Part 2. introduction to physics of low-noise design (Acoustics-Recommendedpracticeforthedesignoflow-noisemachineryandequipment-Part 2. In- troductiontothephysicsoflownoisedesign) ISO 13852.1996 Safety of machinery - Safety distances to prevent danger zones being reached on the lower limbs (Safetyofmachinery-Safety distancestopreventdangerzonesbeingreachedbytheupperlimbs) ISO 14159 Safety of machinery designed for hygiene requirements (Safetyofmachinery-Hygienerequirementsfor thedesignofmachinery) IEC 60227-1 rated voltage of 450/750V or less PVC insulated cables and Part 1. General requirements (Polyvinyl ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 32240-2015_English be delivered?

Answer: Upon your order, we will start to translate GB/T 32240-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 32240-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 32240-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.