GB/T 32195-2015 English PDF

US$339.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32195-2015: Non-destructive testing instruments -- Quality inspection provisions
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 32195-2015	339	Add to Cart	4 days	Non-destructive testing instruments -- Quality inspection provisions	Valid

Similar standards

GB/T 36017   GB/T 36071   GB/T 36015   GB/T 45391   GB/T 32196   

Basic data

Standard ID: GB/T 32195-2015 (GB/T32195-2015)
Description (Translated English): Non-destructive testing instruments -- Quality inspection provisions
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: N78
Classification of International Standard: 19.100
Word Count Estimation: 16,194
Date of Issue: 2015-12-10
Date of Implementation: 2016-07-01
Quoted Standard: GB/T 2828.1-2012; GB/T 2829-2002; GB 4793.1-2007; GB/T 6587; GB/T 17618; GB/T 19000-2000; JB/T 6214
Regulation (derived from): National Standard Announcement 2015 No.38
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the quality nondestructive testing inspection rules, including inspection classification, packet inspection, test items, sampling plans and decision rules. This standard applies to non-destructive testing instruments and accessory equipment (hereinafter referred to as equipment) factory inspection, periodic inspection and type testing.

GB/T 32195-2015: Non-destructive testing instruments -- Quality inspection provisions

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Non-destructive testing instruments - Quality inspection provisions ICS 19.100 N78 National Standards of People's Republic of China Nondestructive testing equipment quality inspection rules Issued on. 2015-12-10 2016-07-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Symbols and abbreviations 2 5 2 General requirements 6 detailed requirements 5 7 Type test 12

Foreword

This standard is prepared in accordance with GB/T 1.1-2009 given rules. The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee tester (SAC/TC122) centralized. This standard was drafted. Liaoning Instrument Research Institute, Shantou Ultrasonic Electronics Corp. Ultrasonic Instrument Branch, Shandong Province Special Equipment Inspection and Research Institute Jining Branch Ji Ning Luke Detection Equipment Co., Ltd., Wuhan Branch Innovation and Technology Co., Ltd. The main drafters of this standard. Li Hongguo, Chen Wei, Shen Defeng, Ma Jun, Wang Zicheng. Nondestructive testing equipment quality inspection rules

1 Scope

This standard specifies the quality nondestructive testing inspection rules, including inspection classification, packet inspection, test items, sampling plan and determination rule. This standard applies to non-destructive testing instruments and accessory equipment (hereinafter referred to as equipment) factory inspection, periodic inspection and type testing.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 2828.1-2012 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample plan GB/T 2829-2002 periodic inspection Sampling procedures and tables (suitable for process stability test) GB 4793.1-2007 measurement, control and laboratory safety requirements for electrical equipment - Part 1. General requirements GB/T 6587 General specification for electronic measuring instruments GB/T 17618 Information technology equipment - Immunity characteristics - Limits and methods of measurement GB/T 19000-2000 Quality Management System Fundamentals and vocabulary JB/T 6214 instrumentation reliability verification test and measurement test (exponential distribution) Guidelines

3 Terms and Definitions

GB/T 2828.1-2012, GB/T 2829-2002, GB/T 19000-2000 define the following terms and definitions apply This document. 3.1 Quality characteristics qualitycharacteristic Product, process or system inherent characteristics and requirements related. 3.2 Important quality characteristics majorqualitycharacteristic Characteristics that affect the production process or production skills changes, as well as essential requirement for achieving a predetermined performance. 3.3 General quality characteristics minorqualitycharacteristic Characteristics of parts or equipment that is more quality and less influence by the impact of the production process or production skills, as well as those requiring special work Loading or performance of special circumstances. 3.4 A class failed nonconformitytypeA A very important quality characteristics per unit of product non-compliance, or per unit of product quality characteristics of very serious non-compliance. 3.5 Class B failed nonconformitytypeB Important quality characteristics per unit of product non-compliance, or per unit of product quality characteristics serious non-compliance. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 32195-2015_English be delivered?

Answer: Upon your order, we will start to translate GB/T 32195-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 32195-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 32195-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.