|
Std ID |
Description (Standard Title) |
|
GB/T 23588-2009
|
Scraps of neodymium iron boron
|
|
GB/T 23589-2009
|
Gadolinium oxalate
|
|
GB/T 23590-2009
|
Praseodymium-neodymium fluoride
|
|
GB/T 23591-2009
|
Lanthanum-cerium-terbium oxide
|
|
GB/T 23592-2009
|
Catalyst for motorcycle exhaust purification
|
|
GB/T 23593-2009
|
Yttrium-europium-gadolinium oxide
|
|
GB/T 23594.1-2009
|
Chemical analysis methods of rare earth contents in samarium-europium-gadolinium concentrates -- Part 1: Determination of total rare earth oxide content -- Gravimetry
|
|
GB/T 23594.2-2009
|
Sm-Eu-Gd enrichment methods for chemical analysis -- Part 2: fifteen rare earth oxide component by inductively coupled plasma emission spectrometry
|
|
GB/T 23595.1-2009
|
Rare white LED lights with yellow phosphor test methods -- Part 1: Determination of spectral properties
|
|
GB/T 23595.2-2009
|
Test methods of rare earth yellow phosphor for white LED lamps -- Part 2: Determination of relative brightness
|
|
GB/T 23595.3-2009
|
Test methods of rare earth yellow phosphor for white LED lamps -- Part 3: Determination of chromaticity coordinates
|
|
GB/T 23595.4-2009
|
Test methods of rare earth yellow phosphor for white LED lamps -- Part 4: Determination of thermostability
|
|
GB/T 23595.5-2009
|
Test methods of rare earth yellow phosphor for white LED lamps -- Part 5: Determination of pH value
|
|
GB/T 23595.6-2009
|
Test methods of rare earth yellow phosphor for white LED lamps -- Part 6: Determination of conductivity
|
|
GB/T 23595.7-2010
|
Test methods of rare earth yellow phosphor for white LED lamps -- Part 7: Determination of temperature quenching
|
|
GB/T 23596-2009
|
Instant seaweed
|
|
GB/T 23597-2009
|
Dried laver
|
|
GB/T 23598-2009
|
Code of practice for water resources bulletin
|
|
GB/T 23599-2009
|
Pure culture of straw mushroom
|
|
GB/T 23600-2009
|
X-ray real-time radioscopic testing method for magnesium alloy castings
|
|
GB/T 23601-2009
|
Method of eddy current testing for titanium and titanium alloy bars and wires
|
|
GB/T 23602-2009
|
Methods of descaling and cleaning for titanium and titanium alloy surfaces
|
|
GB/T 23603-2009
|
Titanium and titanium alloy surface contamination layer detection method
|
|
GB/T 23604-2009
|
Titanium and titanium alloy products for mechanical testing methods
|
|
GB/T 23605-2009
|
Method for β transus temperature determination of titanium alloys
|
|
GB/T 23606-2009
|
Copper-hydrogen embrittlement test method
|
|
GB/T 23607-2009
|
Methods for chemical analysis of copper anode mud -- Determination of arsenic, bismuth, iron, nickel, lead, antimony, selenium and tellurium content -- Inductively coupled plasma-atomic emission spectrometry
|
|
GB/T 23608-2009
|
Platinum groups metals waste classification and technology qualification
|
|
GB/T 23609-2009
|
Seamless copper alloy tube for water desalting applications
|
|
GB/T 23610-2009
|
Pt77Co alloy plate
|
|
GB/T 23611-2009
|
Gold target
|
|
GB/T 2361-1992
|
Rust preventing oils and greases. Test method of wet heat
|
|
GB/T 23612-2009
|
Anodizing and electrophoretic painting technical specification on wrought aluminium alloy extruded profiles for architecture
|
|
GB/T 23613-2009
|
Methods for chemical analysis of osmium powder -- Determination of magnesium, iron, nickel, aluminum, copper, silver, gold, platinum, iridium, palladium, rhodium and silicon content -- Inductively coupled plasma atomic emission spectrometry
|
|
GB/T 23614.1-2009
|
Methods for chemical analysis of titanium nickel shape memory alloy -- Part 1: Determination of nickel content -- Dimethylglyoxime precipitate separation-EDTA complex-zinc chloride back titration
|
|
GB/T 23614.2-2009
|
Chemical analysis methods for titanium nickel shape memory alloy -- Part 2: Determination of cobalt, copper, chromium, iron, niobium content -- Inductively coupled plasma atomic emission spectrometry
|
|
GB/T 23615.1-2009
|
Accessorial material for architectural aluminum alloy profiles -- Part 1: Thermal barrier strip of polyamide
|
|
GB/T 23615.2-2012
|
Accessorial material for architectural aluminum alloy profiles -- Part 2: Material for thermal barrier polyurethane
|
|
GB/T 23616-2009
|
Grades of apples for processing
|
|
GB/T 23617-2009
|
General principles of survey on forestry quarantine pest
|
|
GB/T 23618-2009
|
Report, publication and disestablishment process of quarantine pests
|
|
GB/T 23619-2009
|
Guidelines for quarantine surveillance of bactrocera dorsalis (Hendel)
|
|
GB/T 23620-2009
|
Potato beetle epidemic monitoring procedures
|
|
GB/T 23621-2009
|
Guidelines for the establishment of plant quarantine laboratory
|
|
GB/T 2362-1990
|
Basic rack tooth profile of fine-pitch involute cylindrical gears
|
|
GB/T 23622-2009
|
Quarantine protocols for banana seedlings in places of production
|
|
GB/T 23623-2009
|
Quarantine protocols for sunflower seeds in places of production
|
|
GB/T 23624-2009
|
Quarantine protocols for maize seeds in places of production
|
|
GB/T 23625-2009
|
Guidelines for quarantine surveillance on imported tulips
|
|
GB/T 23626-2009
|
Guidelines for quarantine surveillance of solenopsis invicta buren
|
|
GB/T 23627-2009
|
Technical regulation for the quarantine of poplar and willow weevil
|
|
GB/T 23628-2009
|
Requirements for the establishment of areas of low pest prevalence
|
|
GB/T 23629-2009
|
General requirements for the introduction of plant pathogens
|
|
GB/T 23630-2009
|
Guidelines for a phytosanitary import regulatory system
|
|
GB/T 23631-2009
|
Establishment of pest free areas for fruit flies (Tephritidae)
|
|
GB/T 2363-1990
|
Accuracy of fine-pitch involute cylindrical gears
|
|
GB/T 23632-2009
|
Rule for identification of pests intercepted in entry plant quarantine
|
|
GB/T 23633-2009
|
Guideline for the risk analysis of plant virus and viroid
|
|
GB/T 23634-2009
|
Rules for quarantine of solenopsis invicta buren
|
|
GB/T 23635-2009
|
The writing rules for detection and identification of regulated pests
|
|
GB/T 23636-2009
|
Plate for lead-acid battery
|
|
GB/T 23637-2009
|
Master controller in ships
|
|
GB/T 23638-2009
|
Lead-acid batteries for motorcycles
|
|
GB/T 23639-2009
|
Energy conservation and corrosion-resistant steel-made cable support system
|
|
GB/T 23640-2009
|
AC generators for reciprocating internal combustion (RIC) engine driven generating sets
|
|
GB/T 23641-2009
|
Fiber reinforced unsaturated polyester moulding -- Compounds (SMC and BMC) for electrical purposes
|
|
GB/T 2364-1980
|
Industrial organic products--Determination of iron content--2, 2-bipyridyl method
|
|
GB/T 23642-2009
|
Electrical insulating materials and systems instantaneous rise and repeated electrical shock voltage conditions partial discharge (PD) measurement
|
|
GB/T 23643-2009
|
Wire and cable high-speed knitting machine
|
|
GB/T 23644-2009
|
General specifications for electrical special equipment
|
|
GB/T 10324-1988
|
Refractory products--Definitions of model
|
|
GB/T 23646-2009
|
Fuel cell power system for electric bicycles -- Technical specification
|
|
GB/T 23647-2009
|
General specification for self-service terminal
|
|
GB/T 23648-2009
|
Guideline of earthquake emergency response and rescue for community volunteer
|
|
GB/T 23649-2009
|
Graphic technology -- Process control -- Optical, geometrical and metrological requirements for reflection densitometers for graphic arts use
|
|
GB/T 23650-2009
|
Supermarket shop condition
|
|
GB/T 23651-2009
|
Rubber, vulcanized or thermoplastic -- Hardness testing -- Introduction and guide
|
|
GB/T 23652-2009
|
Plastics -- PVC resins -- Determination of compacted apparent bulk density
|
|
GB/T 23653-2009
|
Plastics -- PVC resins for general use -- Determination of hot plasticizer absorption
|
|
GB/T 23654-2009
|
Rubber, vulcanized and thermoplastic -- Preformed gaskets used in buildings -- Classification, specification and test methods
|
|
GB/T 23655-2009
|
Test for the cure level of compound latex
|
|
GB/T 23656-2009
|
Rubber compounding ingredients -- Silica, precipitated, hydrated -- Determination of CTAB surface area
|
|
GB/T 23656-2016
|
Rubber compounding ingredients -- Determination of surface area for silica, precipitated, hydrated -- CTAB method
|
|
GB/T 23657-2009
|
Series of cycle rims
|
|
GB/T 11066.5-1989
|
Gold--Determination of silver, copper, lead, and bismuth contents--Emission spectrographic method
|
|
GB/T 23659-2009
|
Cots copier
|
|
GB/T 23660-2009
|
Building structure crack split-stopping tape
|
|
GB/T 23661-2009
|
Rubber building structural gaskets
|
|
GB/T 2366-1986
|
Chemical products for industrial use--Determination of water content--Gas chromatographic method
|
|
GB/T 2366-2008
|
Determination of water content in industrial chemicals -- Gas chromatographic method
|
|
GB/T 23662-2009
|
Rubber seals for use between concrete motorway paving sections
|
|
GB/T 23663-2009
|
Test method of automobile tyre longitudinal and lateral stiffness
|
|
GB/T 23664-2009
|
Test method of non-destructive inspection for automobile tyres -- X-ray method
|
|
GB/T 23665-2009
|
1-chloroanthraquinone
|
|
GB/T 23666-2009
|
1-naphthol-5-sulfonic acid (L acid)
|
|
GB/T 23667-2009
|
2, 5-Dichloroaniline
|
|
GB/T 23668-2009
|
2, 6-Dichloro-4-nitroaniline
|
|
GB/T 23668-2016
|
2, 6-Dichloro-4-nitroaniline
|
|
GB/T 23669-2009
|
2, 6-Dibromo-4-nitroaniline
|
|
GB/T 23669-2016
|
2, 6-Dibromo-4-nitroaniline
|