|
US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 17160-2008: Specifications for digitizing 1: 500 1: 1 000 and 1: 2 000 topographic maps
Status: Valid GB/T 17160: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 17160-2008 | English | 229 |
Add to Cart
|
3 days [Need to translate]
|
Specifications for digitizing 1: 500 1: 1 000 and 1: 2 000 topographic maps
| Valid |
GB/T 17160-2008
|
| GB/T 17160-1997 | English | 479 |
Add to Cart
|
4 days [Need to translate]
|
Specifications for digitising of 1: 500, 1: 1000 and 1: 2000 topographic maps
| Obsolete |
GB/T 17160-1997
|
PDF similar to GB/T 17160-2008
Basic data | Standard ID | GB/T 17160-2008 (GB/T17160-2008) | | Description (Translated English) | Specifications for digitizing 1: 500 1: 1 000 and 1 | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A79 | | Classification of International Standard | 07.040 | | Word Count Estimation | 10,130 | | Date of Issue | 2008-06-20 | | Date of Implementation | 2008-12-01 | | Older Standard (superseded by this standard) | GB/T 17160-1997 | | Quoted Standard | GB/T 13923; GB/T 18315; GB/T 18316; GB/T 20257.1; CH/T 1007 | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 11 of 2008 (No. 124 overall) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the information source to 1: 2000 topographic maps, topographic maps scanned using digital means to obtain topographic data methods and requirements. This standard applies to use topographic maps for topographic maps digitized scan data, the corresponding scale digitization of other drawings kind may refer. | GB/T 17160-2008: Specifications for digitizing 1: 500 1: 1 000 and 1: 2 000 topographic maps---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Specifications for digitizing 1. 500 1. 1 000 and 1. 2 000 topographic maps
ICS 07.040
A79
National Standards of People's Republic of China
Replacing GB/T 17160-1997
1.500 1.1000 1.2000
Topographic map digitization specifications
Posted 2008-06-20
2008-12-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 Professional Equipment requirements 1
4.1 scanner 1
4.2 Plotter 1
4.3 digitizing software 2
Basic requirements 5 scans the original image 2
6 Data Classification and Code 2
7 Preparation 2
7.1 preparation 2
7.2 scanning original pretreatment 3
8 Scan and pretreatment 3
Scanning 8.1 Topographic Map 3
8.2 3 raster data preprocessing
9 topology data capture, edit and between elements 3
10 quality control and inspection 4
10.1 Job precision 4
Figure 10.2 Check Out 4
10.3 Check the contents of the job 4
11 Achievements handed 4
Appendix A (informative) uncommon word register 5
Foreword
This standard replaces GB/T 17160-1997 "1.500,1.1000,1.2000 topographic map digitization specifications."
This standard and GB/T 17160-1997 compared to the main changes are as follows.
--- According to GB/T 1.1-2000 "Standardization Guide Part 1. Standard structure and drafting of rules" were the standard
modify;
--- Deleted topographic map of handheld digital automatic tracking technology method, terrain map by digital scanning methods were refined;
--- Delete the original base map term, increase the scan picture, raster data terminology;
--- Delete the original 4.1 digitizer hand tracking, 4.2, 4.3 modify the scanner, plotter requirements;
--- 4.4.2 original data acquisition software to software features;
--- Delete the original data in Chapter 6 and 7, the requirements of Chapter hierarchical graph database and data file naming convention;
--- 8.1.6 deletes the original content inspection job content, replaced by a reference standards;
--- Article 8.2 scanning original digital refine the preparatory work, topology scan and pretreatment, data capture, edit and between elements,
Quality control and inspection four chapters.
--- Delete the original informative Annex. Figure calendar book, adding a reference to the basic geographic information digital product metadata.
Appendix A of this standard is an informative annex.
This standard was proposed by the State Bureau of Surveying and Mapping.
This standard by the National Standardization Technical Committee on Geographical Information.
This standard was drafted. National Mapping Bureau of Surveying and Mapping Standardization Institute.
The main drafters. Zhang Kun, Chen Jun, Zhao Libin, Jia industry wide.
This standard replaces the standards previously issued as follows.
--- GB/T 17160-1997.
1.500 1.1000 1.2000
Topographic map digitization specifications
1 Scope
This standard specifies the information source to 1.500,1.1000,1.2000 relief map, topographic map scanning using digital means to obtain
Methods and requirements for chart data.
This standard applies to the use of digital scanning topographic map topographic map data to obtain the corresponding scale species other figures may refer to digital.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 13923 fundamental geographic information features and classification codes
GB/T 18315 digital topographic map series and basic requirements
GB/T 18316 digital mapping products for inspection, acceptance and quality assessment
GB/T 20257.1 national basic scale map Schema Part 1. 1.500 1.1000 1.2000 Topographical Map
CH/T 1007 Basic Geographic Information Metadata digital products
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
Topographic map for the scan job.
3.2
Arrangement of data having different "gray value" according to the rows and columns of the grid after scanning picture by scanner.
3.3
After topographic map digitization process operation, the topographic map data after the editing process by the schema specification is used to check the number of output by the plotter
Map digitization job content and accuracy.
4 Professional equipment requirements
4.1 Scanner
The scanner should meet the following requirements.
a) scanning resolution is generally not less than 12/mm (300dpi);
b) Effective scanning area is not less than 841mm × 597mm (A1 format).
4.2 Plotter
FIG output for checking plotters should meet the following requirements.
a) Resolution of 10 points/mm (254dpi);
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 17160-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 17160-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 17160-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17160-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 17160-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17160-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|