| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| SN/T 2438.2-2010 | English | 639 |
Add to Cart
|
5 days [Need to translate]
|
Import and Export Toy Inspection procedures - Part 2: bamboo toys
| Obsolete |
SN/T 2438.2-2010
|
PDF similar to SN/T 2438.2-2010
Basic data | Standard ID | SN/T 2438.2-2010 (SN/T2438.2-2010) | | Description (Translated English) | Import and Export Toy Inspection procedures - Part 2: bamboo toys | | Sector / Industry | Commodity Inspection Standard (Recommended) | | Classification of Chinese Standard | Y57 | | Classification of International Standard | 97.200.50 | | Word Count Estimation | 16,115 | | Date of Issue | 2010-03-02 | | Date of Implementation | 2010-09-16 | | Older Standard (superseded by this standard) | SN/T 0734.2-1997 | | Quoted Standard | GB/T 2828.1; GB 5296.5; GB 6675-2003; SN/T 2791.2; ASTM F963-2008; EN 71-1-2005 + A6-2008; EN 71-3-1994 + A1-2000 + AC-2002 | | Regulation (derived from) | National Quality Inspection (2010) 98 | | Issuing agency(ies) | General Administration of Customs | | Summary | This standard specifies the import and export of bamboo toys sampling, testing and test results to determine the rules. This standard applies to wood, bamboo wood as the main raw material import and export of toys tested. | SN/T 2438.2-2010: Import and Export Toy Inspection procedures - Part 2: bamboo toys---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Import and Export Toy Inspection procedures - Part 2. bamboo toys
People's Republic of China Entry-Exit Inspection and Quarantine Standards
Instead of the SN/T 0734.2-1997
Import and Export Toy Inspection procedures
Part 2. Wood Toys
Part 2. Bambooandwoodentoys
Issued on. 2010-03-02
2010-09-16 implementation
People's Republic of China
The State Administration of Quality Supervision, Inspection and Quarantine released
Foreword
SN/T 2438 "Import and Export Toy Inspection Regulations" is divided into six sections.
--- Part 1. Weight bearing children toys;
--- Part 2. bamboo toys;
--- Part 3. Electric toys;
--- Part 4. Soft-filled toys, make clothing;
--- Part 5. mechanical toys;
--- Part 6. plastic toys.
This section SN/T 2438 Part 2.
This section drafted in accordance with GB/T 1.1-2009 given rules.
The partial replacement of SN/T 0734.2-1997 "export wooden toys for the inspection."
This section compared with the SN/T 0734.2-1997, mainly amended as follows.
--- According to the latest US, Europe and China's toy safety standards for toy safety inspection program has been revised.
--- Added "Appendix A special requirements for data export wood toys" that "specific hazardous substances and the corresponding finger
Order limits and testing standards. "
This section proposed and managed by the National Certification and Accreditation Administration Committee.
This section was drafted by. People's Republic of China Jiangsu Entry-Exit Inspection and Quarantine Bureau, People's Republic of China Zhejiang Entry-Exit Inspection and
Quarantine Bureau.
The main drafters of this section. xin Liu, Peng Yue Yang, Xu off the sea.
This part of the standard replaces the previous editions are.
--- SN/T 0734.2-1997.
Import and Export Toy Inspection procedures
Part 2. Wood Toys
1 Scope
This section GB/T 2438 specifies the rules for the determination of sampling, testing and test results of the import and export of wood toys.
This section applies to wood, bamboo wood as the main raw material import and export toys testing.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan
(ISO 2859-1.1999, IDT)
GB 5296.5 consumer use - Part 5. Toys
GB 6675-2003 National Safety Technical Code for Toys
SN/T 2791.2 Import and Export Toy Inspection General technical requirements - Part 2. Safety requirements for electrical performance
ASTMF963-08 Toy Safety
EN71-1.2005 A6.2008 Toy Safety mechanical and physical properties
EN71-3.1994 A1.2000 AC.2002 Safety of toys Migration of certain elements
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Unit product unitproduct
For the implementation of sampling and divided into the basic unit (or units only).
3.2
Submit Batch submittedlot
For the implementation of import and export inspection brings together a group of toys. Toys batch can contain a variety of specifications, it belongs to the same foreign trade contracts and at the same time
Between export. Submit a batch by one or more inspection lots constitution.
3.3
Inspection Lot inspectionbatch
To carry out the inspection pooled together a group of toys. Batch of toys for the same size and type, of the same foreign trade contracts, in the same production conditions
Continuous feed production, the quality requirements of the same product collection. Acronym batch.
3.4
Batch number batchfigure
The number included in each test batch.
|