|
Std ID |
Description (Standard Title) |
|
YY/T 1188-2010
|
EMB agar medium
|
|
YY/T 1189-2010
|
China blue agar medium
|
|
YY/T 1190-2010
|
Lactose bile salt fermentation medium
|
|
YY 0055.1-2009
|
Dentisitry. Powered polymerization activators. Part 1: Quartz tungsten halogen lamps
|
|
YY 0055.2-2009
|
Dentistry. Powered polymerization activators. Part 2: Light-emitting diode (LED) lamps
|
|
YY 0068.4-2009
|
Medical endoscopes. Rigid endoscopes. Part 4: Fundamental requirement
|
|
YY 0069-2009
|
Particular requirements for rigid bronchoscopes
|
|
YY 0096-2009
|
Co-60 teletherapy unit
|
|
YY 0271.1-2009
|
Dentistry-Water-based cements. Part 1: Power/liquid acid-base cements
|
|
YY 0271.2-2009
|
Dental water-based cements. Part 2: Light-activated cements
|
|
YY 0272-2009
|
Dentistry. Zinc oxide/eugenol and zinc oxide/non-eugenol cements
|
|
YY 0286.6-2009
|
Special infusion sets. Part 6: Flow rate-setting and adjustable infusion sets for single use
|
|
YY 0290.10-2009
|
Intraocular lenses. Part 10: Phakic intraocular lenses
|
|
YY 0290.2-2009
|
Ophthalmic implants. Intraocular lenses. Part 2: Optical properties and test methods
|
|
YY 0290.6-2009
|
Intraocular lenses. Part 6: Shelf-life and transport stability
|
|
YY 0300-2009
|
Dentistry. Artificial teeth for dental prostheses
|
|
YY 0304-2009
|
Plasma sprayed hydroxyapatite coated-titanium dental implant
|
|
YY 0321.1-2009
|
Single-use puncture set local anaesthesia
|
|
YY 0321.2-2009
|
Single-use needle for anaesthesia
|
|
YY 0322-2009
|
High frequency fulguration therapy equipment
|
|
YY 0329-2009
|
Leukocyte reduction filters for single use
|
|
YY 0339-2009
|
Suction catheter for use in the respiratory tract
|
|
YY 0448-2009
|
Ultrasonic Doppler foetal heartbeat detector
|
|
YY 0449-2009
|
Ultrasonic Doppler fetal monitor
|
|
YY 0460-2009
|
Ultrasonics dental descaler equipment
|
|
YY 0464-2009
|
Disposable hemoperfutor
|
|
YY 0465-2009
|
Disposable membrane plasmaseparator
|
|
YY 0601-2009
|
Medical electrical equipment. Particular requirements for basic safety and essential performance of respiratory gas monitors
|
|
YY 0635.2-2009
|
Inhalational anaesthesia systems. Part 2: Anaesthetic gas scavenging systems transfer and receiving systems
|
|
YY 0635.3-2009
|
Inhalational anaesthesia systems. Part 3: Anaesthetic vapour delivery devices
|
|
YY 0635.4-2009
|
Inhalational anaesthesia systems. Part 4: Requirements for anaesthetic ventilators
|
|
YY 0709-2009
|
Medical electrical equipment. Part 1-8: General requirements for safety. Collateral standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems
|
|
YY 0710-2009
|
Dentistry. Polymer-based crown and bridge materials
|
|
YY 0711-2009
|
Dental absorbent points
|
|
YY 0712-2009
|
Dental ethyl silicate bonded casting investments
|
|
YY 0713-2009
|
Dental gypsum-bonded casting investments
|
|
YY 0714.1-2009
|
Dentistry. Soft lining material for removable dentures. Part 1: Materials for short-term use
|
|
YY 0714.2-2009
|
Dentistry. Soft lining material for removable dentures. Part 2: Materials for long-term use
|
|
YY 0715-2009
|
Dentistry. Amalgam capsules
|
|
YY 0716-2009
|
Dental-Ceramic
|
|
YY 0717-2009
|
Dental root canal sealing materials
|
|
YY 0718-2009
|
Opthalmic instruments. Retinoscopes
|
|
YY 0719.1-2009
|
Ophthalmic optics. Contact lens care products. Part 1: Vocabulary
|
|
YY 0719.2-2009
|
Ophthalmic optics. Contact lens care products. Part 2: Fundamental requirements
|
|
YY 0719.3-2009
|
Ophthalmic optics. Contact lens care products. Part 3: Microbiological requirements and test methods for products and regiments for hygienic managements of contact
|
|
YY 0719.4-2009
|
Ophthalmic optics-contact lens care products. Part 4: Antimicrobial preservative efficacy testing and determining discard date
|
|
YY 0719.5-2009
|
Ophthalmic optics. Contact lens care products. Part 5: Determination of physical compatibility of contact lens care products with contact lenses [YY/T 0719.5-2009]
|
|
YY 0721-2009
|
Medical electrical equipment-Safety of radiotherapy record and verify systems
|
|
YY 0731-2009
|
Large steam sterilizers. Manual control type
|
|
YY 0732-2009
|
Oxygen concentrators for medical use. Safety requirements
|
|
YY 0755-2009
|
Anaesthetic vaporizers. Agent-specific filling systems
|
|
YY 0761.1-2009
|
Dentistry. Diamond rotary instrument. Part 1: Dimensions, requirements, marking and packaging
|
|
YY 0764-2009
|
Ophthalmic imtrameats. Chart projectors
|
|
YY 0765.1-2009
|
Sets for inactivation of viruses in blood and blood components for single use. Part 1: Sets for virus photodynamic inactivation with methylene blue
|
|
YY 0767-2009
|
Ultrasonic colour flow imaging systems
|
|
YY 0768-2009
|
Dentistry Denture base polymers Impact strength test
|
|
YY 0769-2009
|
Dental phosphoric acid etching agent
|
|
YY 0770.1-2009
|
Fitter material for medical infusion equipments. Part 1: Fluid filter material
|
|
YY 0770.2-2009
|
Filter material for medical infusion equipments. Part 2: Air filter material
|
|
YY 1026-2009
|
Dentistry. Mercury and alloys for dental amalsam
|
|
YY 1045.1-2009
|
Dental handpieces. Part 1: High-speed air turbine handpieces
|
|
YY 1080-2009
|
Ophthalmic instruments. Direct ophthalmoscopes
|
|
YY 1090-2009
|
Ultrasonic physiotherapy equipment
|
|
YY/T 0084.1-2009
|
Strength calculation and relevant regulations of primary pressure components of cylindrical pressure steam sterilizer
|
|
YY/T 0084.2-2009
|
Strength calculation and relevant regulations of primary pressure containing parts for rectangular pressure steam-heated sterilizer
|
|
YY/T 0110-2009
|
Piezoelectric materials for medical ultrasound
|
|
YY/T 0127.10-2009
|
Biological evaluation of medical devices used in dentistry. Part 2: Test method. Salmonella typhimurium reverse mutation assay (Ames mutagenicity test)
|
|
YY/T 0127.13-2009
|
Biological evaluation of medical devices used in dentistry. Part 2: Tset method. Oral mucous membrane irritation test
|
|
YY/T 0127.14-2009
|
Biological evaluation of medical devices used in dentistry. Part 2: Test method. Acute oral toxicity test
|
|
YY/T 0127.15-2009
|
Biological evaluation of medical devices used in dentistry. Part 2: Test method. Subacute and subchronic systemic toxicity test: oral route
|
|
YY/T 0127.16-2009
|
Biological evaluation of medical devices used in dentistry. Part 2: Test method. In Vitro mammalian chromosome aberration test
|
|
YY/T 0127.2-2009
|
Biological evaluation of medical devices used in dentistry. Part 2: Test method. Acute systemic toxicity: intravenous path
|
|
YY/T 0127.9-2009
|
Biological evaluation of medical devices used in dentistry. Part 2: Test method. Cytotoxicity tests: Agar diffusion test and filter diffusion test
|
|
YY/T 0162.1-2009
|
Medical ultrasound equipment class series. Part 1: B mode ultrasound disgnostic equipment
|
|
YY/T 0202-2009
|
Specifications for medical diagnostic X-ray device for tomography
|
|
YY/T 0269-2009
|
Dental. Orthodontic bracket adhesive materials
|
|
YY/T 0273-2009
|
Dental amalgamators
|
|
YY/T 0282-2009
|
Syringe needle
|
|
YY/T 0340-2009
|
Implants for surgery. Fundamental principles
|
|
YY/T 0347-2009
|
Particular specifications for mini medical diagnostic X-ray equipment
|
|
YY/T 0466.1-2009
|
Medical devices. Symbols to be used with medical device labels, labelling and information to be supplied. Part 1: General requirements
|
|
YY/T 0495-2009
|
Dental-root-casai obturating points
|
|
YY/T 0506.2-2009
|
Surgical drapes, gowns and clean air suits for patients, clinical staff and equipment. Part 2: Performance requirements and performance levels
|
|
YY/T 0506.5-2009
|
Surgical drapes, gowns and clean air suits for patients, clinical staff and equipment. Part 5: Test method for resistance to dry microbial penetration
|
|
YY/T 0506.6-2009
|
Surigical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment. Part 6: Test method to determine the resistance to wet bacterial penetration
|
|
YY/T 0507-2009
|
Medical elastic bandage. Characteristics and test methods for basic performance
|
|
YY/T 0508-2009
|
Specific requirements for external fixation devices
|
|
YY/T 0509-2009
|
Standard specification and test methods for bioabsorbable plates and screws for internal fixation implants
|
|
YY/T 0510-2009
|
Amorphous Poly (lactide) and Poly (lactide-co-glycolide) Resins for Surgical Implants
|
|
YY/T 0511-2009
|
Test method for evaluation of the biodegradation and osteogenesis of porous bioceramic in vivo
|
|
YY/T 0512-2009
|
Implants for surgery. Metallic materials. Classification of microstructures for alpha + beta titanium alloy bars
|
|
YY/T 0513.1-2009
|
Allogeneic bone grafts. Part 1: The basic requirements for bone bank
|
|
YY/T 0513.2-2009
|
Allogeneic bone grafts. Part 2: Deep-frozen allogeneic bone grafts and freeze-dried allogeneic bone grafts
|
|
YY/T 0513.3-2009
|
Allogeneic bone grafts. Part 3: Demineralized allogeneic bone grafts
|
|
YY/T 0514-2009
|
Dental handpieces. Hose connnectors
|
|
YY/T 0515-2009
|
Dentistry. Corrosion tests for amalgam
|
|
YY/T 0516-2009
|
Dental EDTA root canal lubricant/cleanser
|
|
YY/T 0517-2009
|
Dental prefabricated root post
|
|
YY/T 0518-2009
|
Dental polymer based adhesives for restoratives
|
|
YY/T 0519-2009
|
Dental materials. Testing of adhesion to tooth structure
|