|
US$139.00 ยท In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
SN/T 2498.2-2010: Basic environmental testing procedures for import and export fireworks. Test Ed: Free fall
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| SN/T 2498.2-2010 | English | 139 |
Add to Cart
|
2 days [Need to translate]
|
Basic environmental testing procedures for import and export fireworks. Test Ed: Free fall
| Valid |
SN/T 2498.2-2010
|
PDF similar to SN/T 2498.2-2010
Basic data | Standard ID | SN/T 2498.2-2010 (SN/T2498.2-2010) | | Description (Translated English) | Basic environmental testing procedures for import and export fireworks. Test Ed: Free fall | | Sector / Industry | Commodity Inspection Standard (Recommended) | | Classification of Chinese Standard | Y88 | | Classification of International Standard | 71.100.30 | | Word Count Estimation | 4,421 | | Date of Issue | 2010-03-02 | | Date of Implementation | 2010-09-16 | | Regulation (derived from) | National Quality Inspection (2010) 98; industry standard filing Notice 2010 No. 5 (No. 125 overall) | | Issuing agency(ies) | General Administration of Customs | | Summary | This standard specifies the fireworks free drop test conditions, severities, initial inspection, testing and final inspection conditions. This standard applies to non-packaged fireworks test sample, as well as their packaging in the transport box can be used as part of a test specimen samples. | SN/T 2498.2-2010: Basic environmental testing procedures for import and export fireworks. Test Ed: Free fall
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Basic environmental testing procedures for import and export fireworks.Test Ed. Free fall
Exit inspection and quarantine industry standard book People's Republic of China
Importers Pyrotechnic products Basic environmental testing norms
Issued on. 2010-03-02
2010-09-16 implementation
People's Republic of China
The State Administration of Quality Supervision, Inspection and Quarantine released
Foreword
SN/T 2498 "Importers Pyrotechnic products environmental testing norms" standard series is divided into two parts.
--- Test Db. Damp heat test, cyclic;
--- Test Ed. Free fall.
This section SN/T 2498 Part 2.
This section proposed and managed by the National Certification and Accreditation Administration Committee.
This section is responsible for drafting unit. People's Republic of China Tianjin Entry-Exit-Entry Inspection and Hunan People's Republic of China
Quarantine Bureau.
The main drafters of this section. Zhao Lihua, Wangli Bing, Han Wei, Zhao Zhuo, Xiongzhong Jiang, Li Xue Yang.
The first part of the Department of Inspection and Quarantine issued by industry standards.
Importers Pyrotechnic products Basic environmental testing norms
1 Scope
This section SN/T 2498 specifies the fireworks free drop test conditions, the severity, initial testing, test conditions and
Final inspection.
This section applies to fireworks test samples of non-packaging, and packaging in the transport box can be used as part of a test sample
sample.
2 Test conditions
2.1 test surface
The test surface should be smooth and made of concrete or steel, hard, rigid surface. When necessary, the relevant specification may specify other surfaces.
2.2 Drop height
Refers to the height of the test sample before the hanging drop when the test surface and the nearest sample between the parts.
2.3 release method
The method of release of test samples test samples from a hanging position of the free fall. When released, to make the minimum interference.
3 severities
The following values should be selected various drop height.
(100), 250, (500), (1000) mm.
Numerical values in parentheses are preferred.
4 Initial Detection
Marked in accordance with relevant provisions of the test sample visual inspection and safety testing.
5 test conditions
5.1 should be required to the relevant specification, the sample is in the normal posture when using transport and free-fall.
5.2 Unless otherwise specified in the relevant specification, the test sample should be dropped from the position of each of the two provisions.
6 final inspection
Test samples should be specified in the relevant specification visual inspection and safety testing.
|