|
US$139.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
SN/T 2176-2008: Determination of solvent separation for dangerous goods of flammable liquids
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| SN/T 2176-2008 | English | 139 |
Add to Cart
|
2 days [Need to translate]
|
Determination of solvent separation for dangerous goods of flammable liquids
| Valid |
SN/T 2176-2008
|
PDF similar to SN/T 2176-2008
Basic data | Standard ID | SN/T 2176-2008 (SN/T2176-2008) | | Description (Translated English) | Determination of solvent separation for dangerous goods of flammable liquids | | Sector / Industry | Commodity Inspection Standard (Recommended) | | Classification of Chinese Standard | A80 | | Classification of International Standard | 13.300 | | Word Count Estimation | 4,488 | | Date of Issue | 2008-09-04 | | Date of Implementation | 2009-03-16 | | Quoted Standard | GB 19458; United Nations "on the Recommendations on the Transport of Dangerous Goods. Model Regulations " (fourteenth revised edition); United Nations ' Recommendations on the Transport of Dangerous Goods book Manual of Tests and Criteria " (fourth revised edition) | | Regulation (derived from) | UN "on the Transport of Dangerous Goods Model Regulations Recommendations." (No. XIV Amendment Version), MOD; United Nations. "Recommendations on the Transport of Dangerous Goods Manual of Tests and Criteria" (No. IV revision Version), MOD | | Issuing agency(ies) | General Administration of Customs | | Summary | This standard specifies the dangerous flammable liquid solvent separation test materials, test procedures and test results. This standard applies to determine paints, varnishes, adhesives and polishes flashpoint below 23��C in a viscous liquid solvent degree of separation. | SN/T 2176-2008: Determination of solvent separation for dangerous goods of flammable liquids---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Determination of solvent separation for dangerous goods of flammable liquids
Exit inspection and quarantine industry standard book People's Republic of China
Dangerous flammable liquid solvent separation test methods
Posted 2008-09-04
2009-03-16 implementation
People's Republic of China
The State Administration of Quality Supervision, Inspection and Quarantine released
Foreword
This revised standard adopts the United Nations "on the Recommendations on the Transport of Dangerous Goods Model Regulations ·" (fourteenth revised edition) and "test and standard
Associate Handbook "(fourth revised edition).
This standard was proposed by the State Administration of Quality Supervision Inspection and Quarantine of People's Republic of China.
This standard by the National Certification and Accreditation Administration Committee.
This standard is drafted by. People's Republic of China Tianjin Exit Inspection and Quarantine.
Participated in the drafting of this standard. the Chemical Institute of Standardization, Jiangnan University, Tianjin Academy of Inspection and Quarantine Science and Technology.
The main drafters of this standard. in Yanjun, Li Jing, Xiongzhong Jiang, Zhou Lei, Chi Yu Feng, Zhao good Lippo.
This standard is the first release of the entry-exit inspection and quarantine industry standards.
Dangerous flammable liquid solvent separation test methods
1 Scope
This standard specifies the materials, test procedures and test results of dangerous flammable liquid solvent separation test.
This standard applies to the determination of paints, varnishes, adhesives and polishes like the degree of separation solvent flash point below 23 ℃ of viscous liquid.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references. All subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB 19458 safety inspection of hazardous properties of dangerous goods - General specifications
United Nations "on the Recommendations on the Transport of Dangerous Goods Model Regulations ·" (fourteenth revised edition)
United Nations "on the Recommendations on the Transport of Dangerous Goods, Tests and Criteria Handbook" (fourth revised edition)
3 Terms and Definitions
United Nations "on the Recommendations on the Transport of Dangerous Goods Model Regulations ·" (fourteenth revised edition), "on the Recommendations on the Transport of Dangerous Goods *
Manual of Tests and Criteria "(fourth revised edition), GB 19458 and established the following terms and definitions apply to this standard.
3.1
Flammable liquids, liquid mixtures or liquids containing solids, including but not because of its hazardous properties have been included in other categories of liquid
Body, flash point, closed cup test flash point equal to or lower than 60 ℃.
4 Materials
--- Top can be sealed with a plug;
--- Total height of about 25cm;
--- Inner diameter of the scale section of the agreement, approximately 3cm.
5 test procedure
5.1 The test Stir with a dangerous flammable liquid samples.
5.2 After stirring the liquid was poured into a graduated cylinder to the mark with 100mL.
5.3 with a plug or sealing membrane cylinder seal.
5.4 24h after standing height with the ruler to measure the separation of the liquid portion.
6 Test Results
6.1 percentage cylinder in the height of the separation solution accounted for the total height of the sample shows the test results.
6.2 was repeated 3 times, the arithmetic mean as the test result.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 2176-2008_English be delivered?Answer: Upon your order, we will start to translate SN/T 2176-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of SN/T 2176-2008_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 2176-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|