Powered by Google www.ChineseStandard.net Database: 189760 (20 Apr 2024)

SJ/T 10412-2002 (SJT10412-2002)

SJ/T 10412-2002_English: PDF (SJT 10412-2002, SJT10412-2002)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
SJ/T 10412-2002English230 Add to Cart 0--9 seconds. Auto-delivery Permanent ferrite powder Obsolete SJ/T 10412-2002

Standard ID SJ/T 10412-2002 (SJ/T10412-2002)
Description (Translated English) Permanent ferrite powder
Sector / Industry Electronics Industry Standard (Recommended)
Classification of Chinese Standard L19
Classification of International Standard 29.030
Word Count Estimation 8,837
Date of Issue 2002-07-31
Date of Implementation 2002-12-01
Older Standard (superseded by this standard) SJ/T 10412-1993
Drafting Organization Jinchuan state radio equipment factory
Administrative Organization National Standardization Technical Committee of Magnetic components and ferrite materials
Regulation (derived from) Ministry of Industry and Commerce Announcement No. 17 of 2016; Industry Standard Record Announcement No. 7 of 2016 (No. 199)
Summary This standard specifies the permanent ferrite powder (hereinafter referred to as "material powder") naming and classification, requirements, test methods and quality assessment procedures and signs, packaging, transport and storage. This standard applies to products manufactured permanent ferrite powders used in a variety of materials, the material powder can be molded directly or further processed.

Standards related to: SJ/T 10412-2002

SJ/T 10412-2002
ICS 29.030
L 19
Record number: 10547-2002
Replacing SJ/T 10412-1993
Permanent ferrite powder
ISSUED ON: JULY 31, 2002
Issued by: Ministry of Industry and Information Technology of China
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Naming and classification ... 4
4 Requirements ... 5
5 Test methods ... 6
6 Quality assessment procedure ... 6
7 Marking, packaging, transportation and storage ... 8
Appendix A (Informative) Magnet process conditions ... 10
Permanent ferrite powder
1 Scope
This Standard specifies the naming and classification, requirements, test methods,
quality assessment procedure, as well as marking, packaging, transportation and storage
of permanent ferrite powder (hereinafter referred to as “powder”).
This Standard applies to various powders used in the manufacture of permanent ferrite
products, which can be directly used or further shaped.
2 Normative references
The terms in the following documents become the terms of this Standard by reference
to this Standard. For dated references, all subsequent amendments (not including errata
content) or revisions do not apply to this standard. However, parties to agreements that
are based on this Standard are encouraged to study whether the latest versions of these
documents can be used. For undated references, the latest edition applies to this
GB 191-2000, Packaging - Pictorial marking for handling of goods
GB/T 2828-1987, Sampling procedures and tables for lot-by-lot inspection by
attributes (Apply to inspection of successive lots or batches)
GB/T 3217-1992, Method of test of the magnetic properties of permanent magnetic
(magnetically hard) materials
GB/T 5048-1985, Moisture proof packaging
SJ/T 10411-2002, Physical analysis methods for permanent ferrite materials
3 Naming and classification
3.1 Naming
The naming example of permanent ferrite powder is as follows:
Example 1:
comply with the provisions of GB/T 5048-1985. The packaging bag shall bear at least
30 kg. Impurities must not be mixed in the powder.
7.2.2 The net weight of each bag of powder is (25±0.3) kg.
7.2.3 Each bag of powder shall be provided with a certificate of conformity with the
seal of the quality inspection department of the manufacturer, and the certificate of
conformity shall be indicated the date of inspection and the name or code of the
7.3 Transportation
7.3.1 The powder is generally transported by conventional transportation methods, such
as automobiles, trains, ships, etc. However, no matter what mode of transportation is
used, the products shall be covered with awnings and shall not be damp.
7.3.2 There must be no mechanical damage to the packaging bag containing the powder
during transportation and loading. It is not allowed to directly hook, throw high, or fall
high during loading and unloading, and the falling-to-the-ground distance shall not be
higher than 50 cm.
7.3.3 If necessary, a simulated loading and unloading test can be carried out on the
packaging bag. During the test, the packaging bag shall be filled with powder such as
fine sand according to the specified weight of 25 kg, placed on a platform of (60~100)
cm and then thrown to the ground, at this time the packaging shall not be broken.
7.4 Storage
7.4.1 Powder shall be stored in warehouses with no acidic, alkaline or other harmful
substances in the surrounding air.
7.4.2 The manufacturer can make clear and detailed regulations on the warehouse
conditions for powder storage in the enterprise standards.