| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| RB/T 046-2020 | English | 239 |
Add to Cart
|
3 days [Need to translate]
|
(Requirements for authorized signatory for management and technical capability evaluation of inspection and testing institutions)
| Obsolete |
RB/T 046-2020
|
PDF similar to RB/T 046-2020
Basic data | Standard ID | RB/T 046-2020 (RB/T046-2020) | | Description (Translated English) | (Requirements for authorized signatory for management and technical capability evaluation of inspection and testing institutions) | | Sector / Industry | Chinese Industry Standard (Recommended) | | Classification of Chinese Standard | A00 | | Word Count Estimation | 6,623 | | Date of Issue | 2020-08-26 | | Date of Implementation | 2020-12-01 | | Regulation (derived from) | National Certification and Accreditation Administration Announcement No. 21 of 2020 | | Issuing agency(ies) | National Certification and Accreditation Administration | RB/T 046-2020: (Requirements for authorized signatory for management and technical capability evaluation of inspection and testing institutions)
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Requirements for authorized signatory for management and technical capability evaluation of inspection and testing institutions)
ICS 03:120:20
A00
The People's Republic of China Certification and Accreditation Industry Standard
Inspection and testing organization management and technical capability evaluation
Authorized signatory requirements
2020-08-26 released
2020-12-01 implementation
Issued by the National Certification and Accreditation Administration Commission
Table of contents
Foreword Ⅰ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 General 1
5 Qualifications 1
6 Duties of authorized signatory 2
7 Responsibilities of authorized signatory 2
Reference 3
Foreword
This standard was drafted in accordance with the rules given in GB/T 1:1-2009:
This standard was proposed and managed by the National Certification and Accreditation Administration Committee:
Drafting organizations of this standard: Beijing Guoshi Testing Technology Research Institute, China Power Investment Engineering Research and Testing and Evaluation Center Co:, Ltd:, Suzhou Electric Division
Research Institute Co:, Ltd:, Jiangsu Product Quality Supervision and Inspection Institute, China Academy of Communications Testing Technology (Beijing) Co:, Ltd:, Sea Inspection and Testing
Co:, Ltd:, Anhui Zhongqing Inspection and Testing Co:, Ltd:, Pony Testing Group Co:, Ltd:, China Railway Electrification Bureau Group Co:, Ltd:
Test Center, National Quality (Beijing) Construction Engineering Testing and Appraisal Center, Sichuan Zhongheng Testing Technology Co:, Ltd:, Fujian Product Quality Inspection Research
Institute, Shaanxi Provincial Medical Device Quality Supervision and Inspection Institute, Shanghai Coal Science Testing Technology Co:, Ltd:, Beijing Henggong Testing Technology Research Institute Co:, Ltd:,
Wuhan Product Quality Supervision and Inspection Institute, Xinjiang Uygur Autonomous Region Quality and Technical Supervision Cadre Education Center, Zhongshan City Construction Project Quality Inspection
Heart Co:, Ltd:, Beijing Xinnuo Judicial Appraisal Institute, Zigong Inspection and Testing Institute, Zhongjiayuan (Beijing) Testing and Certification Co:, Ltd:, China Railway Electrification Bureau
Mission First Engineering Co:, Ltd: Testing Center, Shanghai Lightning Protection Device Testing Station Engineering Department, CITIC Dicastal Co:, Ltd:, National Food Safety
Risk Assessment Center, Hebei Provincial Center for Disease Control and Prevention, Shanxi Provincial Certification and Accreditation Association, Beijing Physical and Chemical Analysis and Testing Center, Guangzhou Zhongke Inspection Center
Testing Technology Service Co:, Ltd:, Shanxi Hongshi Standardization Management Research Institute (Limited Partnership), Shanghai Anjie Environmental Technology Co:, Ltd:
The main drafters of this standard: Huang Tao, Li Yepeng, Li Shaolian, Wei Feng, Shen Ruijun, Cai Hu, Zhai Chuanming, Yang Jianguo, Wang Yuanyuan, Li Chuanzeng,
Song Wei, Zou Jie, Zhang Shengyong, Zhao Jie, Meng Yu, Yin Wanguo, Fei Bigang, Zhou Qibin, Zhang Bochao, Lin Jianguo, Fu Han, Chen Shuliang, Yang Pei, Shang Jie,
Li Qing, Yang Zhen, Gao Yu, Yuan Jianlong, Xue Ying, Huang Liang, Tan Jun, Feng Juan, Qiu Xinhai, Wan Xiaoli, Lu Yanzhang, Li Kai, Liu Jianhua, Cheng Kai, Huang Dingfang,
Wang Su, Alateng, Li Baoming, Gao Xia, Chen Yanhua, Guo Jie, Tang Changxiao, Wang Wenlin, Li Na, Liu Fengkui, Guo Yunfeng, Zhang Guimei, Hong Aizhu:
Inspection and testing organization management and technical capability evaluation
Authorized signatory requirements
1 Scope
This standard specifies the qualifications, responsibilities and responsibilities of authorized signatories of inspection and testing institutions:
This standard applies to the requirements for the ability of authorized signatories in inspection and testing activities:
2 Normative references
The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article
Pieces: For undated references, the latest version (including all amendments) applies to this document:
GB/T 19000 Quality Management System Foundation and Terminology
GB/T 27000 Conformity Assessment Vocabulary and General Principles
GB/T 27020 Operational requirements of various inspection agencies for conformity assessment
GB/T 27025 General requirements for the competence of testing and calibration laboratories
3 Terms and definitions
The following terms and definitions defined in GB/T 19000, GB/T 27000, GB/T 27020, and GB/T 27025 apply to this document:
3:1
Authorizedsignatory
Nominated by an inspection and testing agency, and authorized by the inspection and testing agency to issue an inspection report or certificate within its authorized capacity
personnel:
4 General
Unauthorized signatories shall not issue inspection reports or certificates:
5 Qualifications
The authorized signatory shall meet the following conditions:
a) Familiar with relevant laws and regulations of inspection and testing institutions;
b) Possess an intermediate or above professional technical title or equivalent ability;
c) Have work experience in relevant professional inspection and testing, master the inspection and testing technology in the field of signature, and be familiar with the signature
Corresponding standards, regulations or technical specifications in the word field;
d) Familiar with and master the verification/calibration status of relevant equipment;
e) Familiar with and master the inspection and testing methods and measurement uncertainty evaluation requirements used within the scope of the signature;
f) Be familiar with and master the measurement accuracy and/or measurement uncertainty of the inspection and testing equipment used within the scope of the signature, and comply with
Comply with the corresponding standards, regulations and specifications for inspection and testing;
|