|
US$289.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
LY/T 2001-2011: Ultra thin tungsten carbide tipped circular saw blade
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| LY/T 2001-2011 | English | 289 |
Add to Cart
|
3 days [Need to translate]
|
Ultra thin tungsten carbide tipped circular saw blade
| Valid |
LY/T 2001-2011
|
PDF similar to LY/T 2001-2011
Basic data | Standard ID | LY/T 2001-2011 (LY/T2001-2011) | | Description (Translated English) | Ultra thin tungsten carbide tipped circular saw blade | | Sector / Industry | Forestry Industry Standard (Recommended) | | Classification of Chinese Standard | B97 | | Classification of International Standard | 97.120.20 | | Word Count Estimation | 11,114 | | Date of Issue | 2011-06-10 | | Date of Implementation | 2011-07-01 | | Quoted Standard | GB/T 230.1; GB/T 4879; GB/T 14388; GB/T 14897.2; GB/T 18376.1-2008 | | Regulation (derived from) | State Forestry Administration in 2011 Notice No. 9 | | Issuing agency(ies) | State Forestry Administration | | Summary | This standard specifies the thin carbide saw blade types, sizes, requirements, load testing, inspection rules, marking, packaging and storage of the basic requirements. This standard applies to table sawing wood floor boards, blinds slat, pencil board, plywood, plastic and non-ferrous metals such as ultra-thin circular saw blades (hereinafter referred to as the blade). | LY/T 2001-2011: Ultra thin tungsten carbide tipped circular saw blade---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Ultra thin tungsten carbide tipped circular saw blade
ICS 79.120.20
B97
People's Republic of China Forestry Industry Standard
Ultra-thin carbide circular saw blade
Published on.2011-06-10
2011-07-01 implementation
State Forestry Administration released
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009 "Standardization Work Guide Part 1. Standard Structure and Compilation".
Please note that some elements of this standard may involve patents. Release of this standard
The organization is not responsible for identifying these patents.
This standard is proposed and managed by the National Standardization Technical Committee for Wood-based Panel Machinery (SAC/TC66).
This standard was drafted. Wood Industry Research Institute of China Academy of Forestry, Qianhua Machinery Cutting Tool Co., Ltd.
The main drafters of this standard. Zhang Zhankuan, Huang Liyuan, Li Weiguang.
Ultra-thin carbide circular saw blade
1 Scope
This standard specifies the type, size, requirements, load test, inspection rules, marking, packaging and storage of ultra-thin carbide circular saw blades.
This requirement.
This standard applies to sawn wood floor panels, louver slats, pencil boards, wood-based panels, plastic and non-ferrous metals, etc.
Saw blade (hereinafter referred to as saw blade).
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 230.1 Rockwell hardness test for metallic materials - Part 1. Test methods (A, B, C, D, E, F, G, H, K, N,
T ruler)
GB/T 4879 anti-rust packaging
GB/T 14388 woodworking carbide circular saw blade
GB/T 14897.2 woodworking knives term saw
GB/T 18376.1-2008 Carbide grades Part 1. Carbide grades for cutting tools
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
In the case of the same outer diameter of the saw blade, the ratio of the width of the serration to the outer diameter is smaller than the corresponding serration width and outer diameter of the woodworking carbide circular saw blade.
1/2 of the carbide saw blade.
4 type and size
4.1 The schematic diagram of the saw blade structure is shown in Figure 1, and should comply with the relevant provisions of GB/T 14897.2.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of LY/T 2001-2011_English be delivered?Answer: Upon your order, we will start to translate LY/T 2001-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of LY/T 2001-2011_English with my colleagues?Answer: Yes. The purchased PDF of LY/T 2001-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|