| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/Z 29626-2013 | English | RFQ |
ASK
|
6 days [Need to translate]
|
Guide of on-line monitoring system for turbine-generators
| Obsolete |
GB/Z 29626-2013
|
PDF similar to GBZ29626-2013
Basic data | Standard ID | GB/Z 29626-2013 (GB/Z29626-2013) | | Description (Translated English) | Guide of on-line monitoring system for turbine-generators | | Sector / Industry | National Standard | | Classification of Chinese Standard | K52 | | Classification of International Standard | 29.160.40 | | Word Count Estimation | 34,322 | | Quoted Standard | GB/T 191; GB/T 2423.1; GB/T 2423.2; GB/T 2423.4; GB/T 2423.10; GB 3836.1; GB/T 4798.1; GB/T 4798.2; GB/T 17626.2; GB/T 17626.3; GB/T 17626.4; GB/T 17626.5; GB/T 17626.8; GB/T 17799.2; GB/T 17799.4 | | Regulation (derived from) | National Standards Bulletin 2013 No. 10 | | Issuing agency(ies) | Ministry of Health of the People's Republic of China | | Summary | This standard specifies: turbo-generator line Monitoring System for a variety of devices basic technical conditions, general requirements, reliability requirements, acceptance of technical conditions, the design principle of selection, communication proto | GBZ29626-2013: Guide of on-line monitoring system for turbine-generators---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Guide of on-line monitoring system for turbine-generators
ICS 29.160.40
K52
People's Republic of China national standardization of technical guidance documents
Turbine status online monitoring system
Application Guidelines
2013-07-19 released
2013-12-02 Implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Directory
Foreword Ⅲ
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and definitions 2
4 online monitoring general requirements 3
5 Turbine Generator Online Monitoring Project 4
6 online monitoring system inspection, acceptance and verification 6
7 logo, packaging, transportation and storage 7
Completeness of supply 8
Appendix A (Informative) Generator fault location and features 9
Appendix B (Informative) Turbine - generator stator winding end vibration monitoring system
Appendix C (informative) Partial discharge online monitoring 13
Appendix D (Informative) Turbine Rotor On-line Short-circuit Monitoring 18
Appendix E (Informative) Insulation over-temperature alarm 22
Appendix F (Informative) Turbine Generator Shaft Torsional Vibration Online Monitoring System 25
Foreword
This instructional document has been drafted in accordance with the rules given in GB/T 1.1-2009.
This guidance document is proposed by China Electrical Equipment Industry Association.
This guidance document is organized by the National Large Scale Generator Standardization Technical Committee (SAC/TC511).
The main drafting of the technical guidance of this document. Shandong Electric Power Research Institute, North China Electric Power Research Institute Co., Ltd., East China Electric Power
Experimental Research Institute Co., Ltd., Harbin Institute of Electrical Engineers, Liaoning Provincial Electric Power Co., Ltd. Electric Power Research Institute, Anhui Electric Power Research Institute
Institute, Guangdong Yuedian Group Co., Ltd.
The guidance of technical documents to participate in the drafting unit. Beijing North Heavy Turbine Co., Ltd., Shandong Qilu Electric Manufacturing Co., Ltd.,
Dongfang Electric Co., Ltd., Shanghai Electric Power Station Equipment Co., Ltd., Beijing Sifang Automation Co., Ltd., Shanghai Jiaotong University, North
Jinghua Branch Tongan Monitoring Technology Co., Ltd., Guangzhou Hao Electric Automation Co., Ltd., Shanghai Habitat Technology Co., Ltd., Germany (Shandong) Electric
Force limited technology division.
The main drafters of this technical document are Sun Shumin, Bai Yamin, Bai Kai, Li Fuxing, Sun Yutian, Wang Jianjun, Sheng Mingjun, Ye Guohua,
Wang Anton, Cao Zhiwei, Cheng Yan.
The guidance of technical documents to participate in the drafters. Zhuge Wenbing, Zhang Zhonghai, Wang Yong, Liu Mingxing, Tian Jian, Jiang Xiuchen, Zhu Yuliang, He Wenwei,
Guo Weiqin, Bai Xueyan, Zhou Hang.
Introduction
With the increase of generators' stand-alone capacity, the impact of large generator faults on power generation companies and power grids is increasing. In order to be shipped
Line monitoring the status of the generator, the generator may predict the failure and monitor the development process, all kinds of on-line monitoring device in the turbine power
The machine has been promoted and applied. At present, most of the generator online monitoring equipment in addition to manufacturers standards there is no uniform standard can be based. user,
Design department, manufacturing department of the generator monitoring system may exist different understanding and misunderstanding, the generator online monitoring equipment performance
Parameters, measurement methods are not uniform, the reliability of monitoring equipment, monitoring sensitivity difference is not conducive to the formation of a unified criterion, it is difficult to
Guiding the operation and maintenance of the generator by the ground led to the extension of many of the equipment failures that could have been discovered and avoided in advance to even recurrences.
The purpose of this guidance document is to guide the selection, design, installation and operation of generator monitoring equipment.
Turbine status online monitoring system
Application Guidelines
1 Scope
This Guidance Document stipulates the basic technical conditions, requirements and reliability of various devices for on-line monitoring system of steam turbine condition
Sexual requirements, acceptance of technical conditions, design selection principles, communication protocols and power plant distributed control system DCS (DistributedControlSys-
tem) connection requirements.
This Guidance Document is applicable to Turbine Generator Online Monitoring System (hereinafter referred to as Monitoring System).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs (GB/T 191-2008, ISO 780.1997, MOD)
GB/T 2423.1 Environmental testing for electric and electronic products Part 2. Test methods Test A. Low temperature (GB/T 2423.1-
2008, IEC 60068-2-1.2007, IDT)
GB/T 2423.2 Environmental testing for electric and electronic products Part 2. Test methods Test B. High temperature (GB/T 2423.2-
2008, IEC 60068-2-2.2007, IDT)
GB/T 2423.4 Environmental testing for electric and electronic products Part 4. Test methods Test Db. Alternating hot and humid (12h 12h cycle
Ring) (GB/T 2423.4-2008, IEC 60068-2-30.2005, IDT)
GB/T 2423.10 Environmental testing for electric and electronic products Part 10. Test Fc. Vibration (sinusoidal) (GB/T 2423.10-
2008, IEC 60068-2-6.1995, IDT)
GB 3836.1 explosive atmospheres - Part 1. General requirements for equipment (GB 3836.1-2010, IEC 60079-0.2007,
MOD)
GB/T 4798.1 electrical and electronic product application environmental conditions Part 1. Storage (GB/T 4798.1-2005, IEC 60721-3-
1.1997, MOD)
GB/T 4798.2 electrical and electronic products application environmental conditions Part 2. Transport (GB/T 4798.2-2008,
IEC 60721-3-2.1997, MOD)
GB/T 17626.2 Electromagnetic compatibility test and measurement techniques Electrostatic discharge immunity test (GB/T 17626.2-2006,
IEC 61000-4-2.2001, IDT)
GB/T 17626.3 Electromagnetic compatibility test and measurement techniques RF electromagnetic radiation immunity test (GB/T 17626.3-
2006, IEC 61000-4-3.2002, IDT)
GB/T 17626.4 Electromagnetic compatibility test and measurement techniques Electrical fast transient burst immunity test (GB/T 17626.4-
2008, IEC 61000-4-4.2004, IDT)
GB/T 17626.5 electromagnetic compatibility test and measurement technology surge (impact) immunity test (GB/T 17626.5-2008,
IEC 61000-4-5.2005, IDT)
GB/T 17626.8 Electromagnetic compatibility test and measurement techniques Frequency magnetic field immunity test (GB/T 17626.8-2006,
IEC 61000-4-8.2001, IDT)
GB/T 17799.2 common standard electromagnetic compatibility Immunity test in industrial environments (GB/T 17799.2-2003,
|