|
US$489.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 39635-2020: Metallic materials - Measurement of indentation tensile properties and residual stresses by an instrumented indentation test
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 39635-2020 | English | 489 |
Add to Cart
|
5 days [Need to translate]
|
Metallic materials - Measurement of indentation tensile properties and residual stresses by an instrumented indentation test
| Valid |
GB/T 39635-2020
|
PDF similar to GB/T 39635-2020
Basic data | Standard ID | GB/T 39635-2020 (GB/T39635-2020) | | Description (Translated English) | Metallic materials - Measurement of indentation tensile properties and residual stresses by an instrumented indentation test | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | H22 | | Classification of International Standard | 77.040.10 | | Word Count Estimation | 26,284 | | Date of Issue | 2020-12-14 | | Date of Implementation | 2021-07-01 | | Regulation (derived from) | National Standard Announcement No. 28 of 2020 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 39635-2020: Metallic materials - Measurement of indentation tensile properties and residual stresses by an instrumented indentation test
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Metallic materials-Instrumented indentation method for measuring indentation tensile properties and residual stress)
ICS 77:040:10
CCSH22
National Standards of People's Republic of China
Instrumented indentation method for metal materials
Indentation tensile properties and residual stress
(ISO /T R29381:2008,Metalicmaterials-Measurementofmechanical
NEQ)
2020-12-14 release
2021-07-01 implementation
State Administration for Market Regulation
Issued by the National Standardization Management Committee
Table of contents
Preface Ⅲ
Introduction Ⅳ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Symbols and description 2
5 Principle 4
6 Testing machine 10
7 Sample 12
8 Test procedure 12
9 Uncertainty of results 13
10 Test report 13
Appendix A (informative) Comparison of uniaxial tensile properties and indentation tensile properties 15
Appendix B (informative) Comparison of residual stress testing by drilling method, cutting method, X-ray diffraction method and instrumented indentation test method 18
Reference 21
Foreword
This document is in accordance with the provisions of GB/T 1:1-2020 Standardization Guidelines Part 1: Structure and Drafting Rules of Standardization Documents
Drafting:
This document uses the redrafting method with reference to ISO /T R29381:2008 "Metallic material instrumented indentation test to determine mechanical properties
"Mark Tensile Performance" is compiled, and the degree of consistency with ISO /T R29381:2008 is not equivalent:
The main differences between this document and ISO /T R29381:2008 are as follows:
---Modify the standard name to "Metal material instrumented indentation method to determine the tensile properties and residual stress of indentation", adding the measurement of residual
For the stress part, use the instrumented indentation test method to determine the indentation tensile properties and residual stress;
---Modified the scope, deleted the description of the three methods in Chapter 1 of ISO /T R29381:2008, and added the description of residual stress;
---Modified the terms and definitions, and added the terms and definitions of spherical indenter and Vickers indenter;
---Modified the symbol and description, and added the symbol and name of the residual stress part;
---Retained ISO /T R29381:2008 stress strain method 5:1:1 principle and 5:1:16 data analysis as the 5:1 pressure of this document
The principle of measurement of tensile properties of traces is adjusted, and A:3 of ISO /T R29318 Appendix A is adjusted as 5:2 of this document for residual stress measurement:
The content principle is modified and the content is modified; the finite element analysis method and neural network method that are not directly effective without the stress-strain method are deleted
Content, enhance the operability of the instrumented press-in test method;
---Added the residual stress test procedure:
This document was proposed by the China Iron and Steel Association:
This document is under the jurisdiction of the National Steel Standardization Technical Committee (SAC/TC183):
Drafting organizations of this document: Shanghai Jiaotong University, Metallurgical Industry Information Standards Research Institute, State Grid Liaoning Electric Power Research Institute
Research Institute, Beijing Chunqiu Sunshine Technology Co:, Ltd:, Zhejiang Huadian Equipment Testing and Research Institute Co:, Ltd:, Shanghai Shangcai Inspection Machinery Co:, Ltd:, Shanghai Hai
Industrial Products and Raw Materials Testing Technology Center, Chengdu Haiguang Nuclear Power Technology Service Co:, Ltd:, Baoshan Iron and Steel Co:, Ltd:, Beijing Times
Zhifeng Technology Co:, Ltd:
The main drafters of this document: Yu Zhengyue, Dong Li, Sun Mingcheng, Xu Xuelong, Ma Heng, Deng Xiaowei, Hou Huining, Wei Zhiqing, Wu Yiwen, Gou Yuan,
Fang Jian, Chen Tianbin:
Introduction
This document provides methods for measuring tensile properties and residual stresses of metallic materials using instrumented indentation tests: Indentation test with spherical indenter
At the same time, measure the indentation test force-depth curve, and obtain the indentation yield strength, tensile strength and strain hardening index through this curve:
To characterize the tensile properties of metal materials: The Vickers indenter and the spherical indenter were pressed into the surface of the sample respectively, and the measured stress and non-response were compared:
The indentation test force-depth curve of the metal material in the state of force is used to obtain the surface residual stress of the metal material sample or component:
Due to the small diameter of the indenter and the shallow indentation depth, the instrumented indentation test method is a non-destructive or micro-destructive test method: Especially suitable for
Test the tensile properties and residual stress when the on-site equipment and components cannot be cut or the material is too small to make standard samples:
It is determined that it has significant advantages and broad application prospects in the rapid inspection of raw materials, small sample inspection and safety assessment of in-service engineering components:
Compared with the uniaxial tensile test, the indentation tensile performance obtained by the instrumented indentation test more reflects the local performance of the metal material:
Can be completely equivalent to uniaxial tensile properties: But when the tensile test cannot be carried out, this method can be used as a good supplement and reference:
Instrumented indentation method for metal materials
Indentation tensile properties and residual stress
1 Scope
This document specifies the terms and definitions, symbols and descriptions of the instrumented indentation test method for indentation tensile properties and residual stress of metallic materials:
Test principle, test machine, sample, test procedure, uncertainty of result and test report, etc:
This document is applicable to the instrumental indentation method determination of indentation tensile properties and residual stress of metallic materials: Instrumented indentation test
The classification of GB/T 21838:1 belongs to the macroscopic range, and the press-in test force is 2N~3kN:
2 Normative references
The contents of the following documents constitute indispensable clauses of this document through normative references in the text: Among them, dated quotations
Only the version corresponding to the date is applicable to this document: For undated references, the latest version (including all amendments) is applicable to
This document:
GB/T 21838:1-2019 Instrumental indentation test for hardness and material parameters of metallic materials-Part 1: Test method
(ISO 14577-1:2015, IDT)
GB/T 21838:2 Instrumental indentation test for hardness and material parameters of metallic materials-Part 2: Inspection and calibration of testing machines
(GB/T 21838:2-2008, ISO 14577-2:2002, MOD)
JJF1059:1-2012 Measurement Uncertainty Evaluation and Expression
3 Terms and definitions
The following terms and definitions apply to this document:
3:1
Instrumented indentation test
IIT
The test method of mechanical properties of metal materials is obtained by continuously recording the test force-depth curve when the indenter is pressed into the sample:
3:2
Sphericalindenter
The head is a spherical indenter:
3:3
Vickers indenter
The top is a square pyramid diamond indenter with an angle of 136° between two opposite faces:
3:4
Indentation tensile properties
Continuously record the indentation test force-depth curve of the metal material through the instrumented indentation test, and analyze it by establishing the stress-strain relationship
The tensile properties obtained include indentation yield strength, indentation tensile strength, strain hardening index, etc:
Note: For the comparison of uniaxial tensile properties and indentation tensile properties, see Appendix A:
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 39635-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 39635-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 39635-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 39635-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|