|
US$559.00 ยท In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32813-2016: Green manufacturing -- Life cycle assessment for mechanical products -- Detailed regulations
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 32813-2016 | English | 559 |
Add to Cart
|
5 days [Need to translate]
|
Green manufacturing -- Life cycle assessment for mechanical products -- Detailed regulations
| Valid |
GB/T 32813-2016
|
PDF similar to GB/T 32813-2016
Basic data | Standard ID | GB/T 32813-2016 (GB/T32813-2016) | | Description (Translated English) | Green manufacturing -- Life cycle assessment for mechanical products -- Detailed regulations | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J04 | | Classification of International Standard | 25.010 | | Word Count Estimation | 28,251 | | Date of Issue | 2016-08-29 | | Date of Implementation | 2017-03-01 | | Regulation (derived from) | National Standard Announcement 2016 No.14 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 32813-2016: Green manufacturing -- Life cycle assessment for mechanical products -- Detailed regulations
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Green manufacturing - Life cycle assessment for mechanical products - Detailed regulations
ICS 25.010
J04
National Standards of People's Republic of China
Life cycle evaluation of green manufacturing machinery products
Rules
2016-08-29 released
2017-03-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
China National Standardization Management Committee released
Directory
Preface III
Introduction IV
1 Scope 1
2 normative reference document 1
3 Terms and definitions 1
4 evaluation phase and process 1
5 Purpose and scope of determination 2
6 List Analysis 7
7 Life Cycle Impact Assessment 11
8 Life Cycle Interpretation
9 Report 15
10 Appraisal
Appendix A (informative) Evaluation Purpose and Scope Determination Example 16
Appendix B (informative) Source of data 17
Appendix C (informative) Data requirements 18
Appendix D (informative) Data collection table Example 20
Appendix E (informative) Examples of life cycle impact assessment of mechanical products
Reference 24
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This standard is proposed by the National Green Manufacturing Technology Standardization Technical Committee (SAC/TC337).
The drafting unit of this standard. Shandong University, in the machine productivity promotion center, Shandong University of Architecture, Shunde District of Foshan City, quality and technical supervision standards
And the code, Hefei University of Technology.
The main drafters of this standard. Li Fangyi, Xi Daoyun, Wang Xiaowei, Zhao Xiaochun, Zhang Lei.
Introduction
This standard is based on GB/T 26119-2010 "green manufacturing machinery product life cycle assessment of the General Principles" to develop the principles and framework,
According to the mechanical product manufacturing process discrete, complex process, the use of long cycle characteristics, the mechanical product life cycle assessment of the four stages of the process
And the contents of the refinement, given the evaluation of the steps and specific requirements.
Mechanical product life cycle assessment using the system point of view, the mechanical product life cycle or a certain stage (link) environmental impact into
Line identification, quantification, analysis and evaluation. This standard can be used for green manufacturing evaluation of mechanical products can also be used for enterprise environmental performance evaluation, mechanical production
Product identification and declaration of environmental labeling.
Life cycle evaluation of green manufacturing machinery products
Rules
1 Scope
This standard specifies the evaluation phase and process, purpose and scope of the LCA, the inventory analysis, the life
Periodic impact assessment, life cycle interpretation, reporting and accreditation.
This standard applies to assessing the potential environmental impact of the mechanical product life cycle or at the specified stage.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
Principles and framework for the assessment of environmental management life cycle GB/T 24040-2008
Environmental management life - cycle assessment requirements and guidance GB/T
General rules for the evaluation of life cycle of green manufacturing machinery products GB/T 26119
3 terms and definitions
GB/T 24040-2008, GB/T 24044-2008 and GB/T 26119-2010 The terms and definitions defined apply to this document.
4 evaluation phase and process
The life cycle evaluation of mechanical products is divided into four stages. the determination of the purpose and scope, the inventory analysis, the impact evaluation and interpretation.
The main content and process shown in Figure 1.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 32813-2016_English be delivered?Answer: Upon your order, we will start to translate GB/T 32813-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 32813-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 32813-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|