GB/T 32335-2015 PDF in English
GB/T 32335-2015 (GB/T32335-2015, GBT 32335-2015, GBT32335-2015)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 32335-2015 | English | 130 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Mechanical vibration and shock -- Parameters to be specified for the acquisition of vibration data
| Valid |
Standards related to (historical): GB/T 32335-2015
PDF Preview
GB/T 32335-2015: PDF in English (GBT 32335-2015) GB/T 32335-2015
GB
NATIONAL STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 17.160
J 04
GB/T 32335-2015 / ISO 21289.2008
Mechanical vibration and shock - Parameters to be
specified for the acquisition of vibration data
(ISO 21289.2008, IDT)
ISSUED ON. DECEMBER 31, 2015
IMPLEMENTED ON. JULY 1, 2016
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration Committee.
Table of Contents
Foreword ... 3
Introduction ... 4
1 Scope ... 5
2 Normative references ... 5
3 Terms and definitions ... 5
4 Abbreviated terms ... 5
5 Parameters to be specified ... 6
6 Vibration test reporting ... 13
Bibliography ... 18
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard uses translation method and identically adopts ISO 21289.2008
Mechanical vibration and shock - Parameters to be specified for the acquisition
of vibration data.
The Chinese document which has consistency with the international normative
reference in this Part is as follows.
- GB/T 2298-2010 Mechanical vibration, shock and condition monitoring -
Vocabulary (ISO 2041.2009, IDT)
This Standard was proposed by shall be under the jurisdiction of National
Technical Committee on Mechanical Vibration, Shock and Condition Monitoring
of Standardization Administration of China (SAC/TC 53).
The drafting organizations of this Standard. Zhengzhou University, Zhengzhou
Institute of Machinery, Shanghai Generator Factory of Shanghai Power Station
Equipment Co., Ltd., Hangzhou ECON Technology Co., Ltd..
Main drafters of this Standard. Miao Tongchen, Xu Wentao, Han Guoming,
Wang Yicui, Hu Jianbo, Zhao Yugang.
Mechanical vibration and shock - Parameters to be
specified for the acquisition of vibration data
1 Scope
This Standard identifies a set of parameters to be specified, as applicable, for
vibration measurements, analysis, reporting and archiving. It is intended for use
in the testing of structures, machines, vehicles, sensitive equipment and other
dynamic systems.
This Standard applies to measurements made by modern data acquisition
systems, including digital signal processors, using readily available commercial
instrumentation. It can be applied to a variety of common vibration
measurement types, including time history, spectrum and frequency-response
function measurements.
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any
amendments) applies.
ISO 2041, Mechanical vibration, shock and condition monitoring -
Vocabulary
ISO 18431-2, Mechanical vibration and shock - Signal processing - Part 2.
Time domain windows for Fourier Transform analysis
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 2041
apply.
4 Abbreviated terms
ASCII. American standard code for information interchange
UFF. universal file format
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|