|
US$259.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 31559-2015: Collets for tool holders with taper ratio 1: 10 -- Collets, holders, nuts
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 31559-2015 | English | 259 |
Add to Cart
|
3 days [Need to translate]
|
Collets for tool holders with taper ratio 1: 10 -- Collets, holders, nuts
| Valid |
GB/T 31559-2015
|
PDF similar to GB/T 31559-2015
Basic data | Standard ID | GB/T 31559-2015 (GB/T31559-2015) | | Description (Translated English) | Collets for tool holders with taper ratio 1: 10 -- Collets, holders, nuts | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J52 | | Classification of International Standard | 25.060.20 | | Word Count Estimation | 12,199 | | Date of Issue | 2015-05-15 | | Date of Implementation | 2016-01-01 | | Quoted Standard | GB/T 1804-2000 | | Adopted Standard | ISO 10897-1996, MOD | | Regulation (derived from) | National Standard Announcement 2015 No. 15 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Standard specifies the collet for gripping a cylindrical tool shank, taper seat and nut size, material, technical requirements and marking. Do not meet this standard collet chuck, chuck drawing as otherwise provided, for example, negotiated by both parties decide. A type for holding the deviation range is h10 situation. B-type lateral cut for no load conditions. | GB/T 31559-2015: Collets for tool holders with taper ratio 1: 10 -- Collets, holders, nuts---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Collets for tool holders with taper ratio 1.10. Collets, holders, nuts
ICS 25.060.20
J52
National Standards of People's Republic of China
1.10 tool shank taper shank collet chuck
Collets, taper seat nut
Colets, holders, nuts
(ISO 10897.1996, MOD)
Issued on. 2015-05-15
2016-01-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard uses redrafted Law Amendment uses ISO 10897.1996 "with the tool shank collet chuck collet chuck taper shank 1.10,
Taper seat nut. "
This standard and ISO 10897.1996 The main differences are as follows.
--- Remove the ISO 10897.1996 Foreword;
--- The ISO 2768-1. 1989 to the national standard GB/T 1804-2000;
--- The surface roughness Rz Ra value to value, Rz2.5 to Ra0.8, Rz6.3 to Ra1.6 (Figures 1, 2 and 4);
--- Table A.1 and A.2 in "0.81.3" and to "0.8 to 1.3" (see Appendix A).
The standard proposed by China Machinery Industry Federation.
The standard metal cutting machine tools by the National Standardization Technical Committee (SAC/TC22) centralized.
This standard is drafted by. Institute of Yantai Machine Tool Accessories, Shanghai Jin basket Precision Machine Parts Co., Ltd., the national quality monitoring tools
Governor Inspection Center.
The main drafters of this standard. Qing said, the money Zhiming, Zhang Wei.
1.10 tool shank taper shank collet chuck
Collets, taper seat nut
1 Scope
This standard specifies the collet chuck for holding a cylindrical tool shank, taper seat and nut size, material, technical requirements and marking. Correct
It does not meet this standard collet chuck, chuck, for example drawings as otherwise provided by the agreement between the decision.
A type for holding the deviation range h10 situation.
Type B for no transverse cutting load situation.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 1804-2000 General tolerances for linear and angular dimensions without individual tolerance tolerance (eqv ISO 2768-1. 1989)
3 Dimensions
Collets, taper and nut does not have to match the seat Figures 1 to 4; only the figure given should be the same size.
General tolerances shall comply with GB/T 1804-2000 m in class.
3.1 collet chuck
Figure 1, Figure 2 and Table 1.
Mm tolerance
Surface roughness m
the remaining
Figure 1 A-type collets unilateral grooved, short clamping bore
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 31559-2015_English be delivered?Answer: Upon your order, we will start to translate GB/T 31559-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 31559-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 31559-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|