|
US$569.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 31456-2015: Technical specification for surface oil and gas geochemical exploration
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 31456-2015 | English | 569 |
Add to Cart
|
5 days [Need to translate]
|
Technical specification for surface oil and gas geochemical exploration
| Valid |
GB/T 31456-2015
|
PDF similar to GB/T 31456-2015
Basic data | Standard ID | GB/T 31456-2015 (GB/T31456-2015) | | Description (Translated English) | Technical specification for surface oil and gas geochemical exploration | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | E11 | | Classification of International Standard | 75.010 | | Word Count Estimation | 27,210 | | Date of Issue | 2015-05-15 | | Date of Implementation | 2015-08-01 | | Quoted Standard | GB/T 958; GB/T 29173; DZ/T 0075; SY/T 5927 | | Regulation (derived from) | National Standard Announcement 2015 No. 15 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Standard specifies the oil and gas surface geochemical exploration mission, technical requirements and all aspects of the work program. This Standard is suitable for onshore oil and gas geochemical exploration, offshore oil and gas geochemical exploration work refer to this standard use. | GB/T 31456-2015: Technical specification for surface oil and gas geochemical exploration---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Technical speclfication for surface oil and gas geochemical exploration
ICS 75.010
E11
National Standards of People's Republic of China
Oil and Gas
Surface geochemical exploration technology specification
Issued on. 2015-05-15
2015-08-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 Working Phases 1
4.1 1 reconnaissance
4.2 census 2
4.3 sift 2
PRECISE 2 4.4
5 OIL AND GAS EXPLORATION design 2
5.1 Design Geology 2
5.2 Design of Construction
6 4 field work
6.1 points and deployment requirements 4
6.2 Sample collection methods and requirements 4
6.3 sampling point and observation catalog 6
6.4 original records inspection and field data compilation 6
6.5 fieldwork quality inspection and acceptance 6
7 Sample 7 Disposal
7.1 transfer of field samples 7
7.2 Sample Preparation 7
7.3 Transfer of samples 8
7.4 subsamples save the waste soil (rock) samples 8
8 samples were measured 8
8.1 Determination of Item 8
8.2 Test Requirements 9
9 Data processing and compilation of FIG. 9
9.1 Data Entry 9
9.2 data processing and data compilation 9
9.3 maps compiled 11
10 comprehensive interpretation and evaluation 11
10.1 index (parameter) screening and analysis 11
10.2 Influencing Factors 11
10.3 Exception known pattern analysis 12
10.4 Anomaly Analysis and Research 12
10.5 Comprehensive abnormal levels of classification and evaluation 12
Write 1211 results report
11.1 report writing requirements 12
11.2 main Report 12
Appendix A (normative) OIL AND GAS EXPLORATION about the quantization parameter 14
Appendix B (normative) soil (rock) sample record card 17
Annex C (normative) water chemistry sampling record card 18
Annex D (normative) gas sampling record card 19
Appendix E (normative) soil field naming method 20
Annex F (informative) field samples EIR 21
Annex G (informative) OIL AND GAS EXPLORATION single sample to send samples 22
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard by the National Standardization Technical Committee of Oil and Gas (SAC/TC355) and focal points.
This standard is mainly drafted by. Wuxi Institute of Petroleum Geology Research Institute of Petroleum Exploration and Development Co., Ltd. China Petroleum & Chemical.
Participated in the drafting of this Standard. China Geological Survey Bureau of Petroleum Resources Research Center, Qingdao Institute of Marine Geology China Geological Survey,
Geophysical and Geochemical Exploration Institute, Chinese Academy of Geological Sciences, China Petroleum Group Geophysical Exploration Co., Ltd.
The main drafters of this standard. Zhaoke Bin, Li Wu, Tang Yuping, Sun Changqing, with Cheng Jin, Hua Xia ring, Li Shuanglin, the Kingdom built Zhuhuai Ping, Wu Chuanzhi,
Sunzhong Jun, cable filial East.
Oil and Gas
Surface geochemical exploration technology specification
1 Scope
This standard specifies the surface geochemical exploration of oil and gas (hereinafter referred to as oil and gas geochemical) tasks, work procedures and various aspects of the technology
Surgery requirements.
This standard is suitable for onshore oil and gas geochemical exploration, marine oil and gas exploration work refer to this standard use.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 958 regional geological map legend
GB/T 29173 oil and gas geochemical exploration sample measurement method
DZ/T 0075 Figure type geochemical exploration, legends and standard colors
SY/T 5927 Petroleum Exploration Global Positioning System (GPS) measurement specification
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Surface Interference with surfaceinterferencezone
And the presence of near-surface atmospheric layer of soil material exchange.
3.2
Geochemical landscape geochemicallandscape
Having surface features consistent geomorphic units.
NOTE. Appendix B, column 14 shows the call of these landforms.
3.3
Abnormal contrast anomalycontrast
Geochemical anomaly index value ratio and overall strength mean, characterization of geochemical anomalies significant degree.
3.4
Late superimposed strength intensityoflatesuperimposition
The overall average of geological and geochemical indicators of normal mathematical expectation index content than the background values.
4 Working Phases
4.1 reconnaissance
Task is to investigate geochemical characteristics, geological and geophysical data to predict Basin oil and gas prospects for early evaluation mention basin
Available basis. Shall meet the following requirements.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 31456-2015_English be delivered?Answer: Upon your order, we will start to translate GB/T 31456-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 31456-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 31456-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|