SY/T 10011-2023 (SY/T 10011-2006) PDF English
Search result: SY/T 10011-2006 (SY/T 10011-2023 Newer Version)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| SY/T 10011-2023 | English | RFQ |
ASK
|
3 days
|
(Oilfield development plan preparation guide)
| Valid |
| SY/T 10011-2006 | English | 150 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Guide to programing overall development program for oil fields
| Obsolete |
| SY/T 10011-1997 | English | 199 |
Add to Cart
|
2 days
|
(The overall development program for offshore oil field guide)
| Obsolete |
SY/T 10011-2006: PDF in English (SYT 10011-2006) SY/T 10011‐2006
Translated English of Chinese Standard. SY/T 10011‐2006
SY
ICS 75.020
E 10
Record No.. 18096-2006
OIL & GAS INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
Replacing SY/T 10011-1997
Guide to programing overall development
program for oil fields
ISSUED ON. JULY 10, 2006
IMPLEMENTED ON. JANUARY 1, 2007
Issued by. National Development and Reform Commission
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Terms and definitions ... 5
4 Basic conditions of PREPARING the overall development program ... 6
5 Outline of PREPARING overall development program for oil fields ... 7
6 General introductions ... 9
7 Geology of oil fields and oil reservoir engineering ... 9
8 Drilling-and-completions and oil production technology ... 19
9 Oil fields surface / offshore development engineering ... 30
10 Project organization management and production operation ... 46
11 Occupational health, safety and environmental protection ... 47
12 Investment estimate and economic appraisal ... 51
13 Attachments ... 56
14 PREPARING requirements of report ... 56
Foreword
This Standard involves in various professions of PREPARING overall development
program for oil-fields. It is an important standard to guide to PREPARING overall
development program for oil-fields. This Standard replaces SY/T 10011-1997 Guide to
Programming Overall Development Program for Offshore Oil Fields.
[Translator’s Note. Words “PREPARING / PREPARE / PREPARATION” could also be
replaced by the words “programming / program”, as used by the original Chinese version
of this Standard (in standard title and terms definition).]
This Standard is divided into 14 chapters. Chapter 1 is "Scope"; Chapter 2 is "Normative
references"; Chapter 3 is "Terms and definitions"; Chapter 4 defines “Basic conditions of
PREPARING overall development program”; Chapter 5 specifies “Outline of PREPARING
overall development program for oil fields”; Chapter 6~13 specifies the basic contents of
each volume in “Overall development program report”; Chapter 14 defines “PREPARING
requirements of report”. Energy-saving principle requirements have been integrated in
each chapters of this Standard, so it is not listed separately.
Compared with SY/T 10011-1997, the main changes of this Standard are as follows.
— Add the "Terms and definitions", in order to clarify the early study stages and
corresponding requirements of the development (see Chapter 3 of this edition);
— Add the "Basic Conditions of PREPARING Overall Development Program".
Clearly define the basic conditions of PREPARING the program (see Chapter 4 of
this edition);
— According to the latest national requirements, modify the chapters and combine
the “Occupational health, safety and environmental protection” into one chapter;
— Add the "Attachment" and delete the Appendix, in order to improve the
PREPARING quality and efficiency and reduce the length of the text body;
— In addition, this Standard expands the adaption to the requirements of SY/T
10011-1997, according to the actual situations and needs on land; and adds or
deletes the contents accordingly.
This Standard was proposed and shall be centralized by the Petroleum Industry
Standardization Technical Committee.
Drafting organizations of this Standard. China National Offshore Oil Corporation, China
National Petroleum Corporation, China National Petroleum Corporation, China
Petrochemical Corporation, and China Petroleum & Chemical Corporation.
Main drafters of this Standard. Sun Jialing, Jin Yunming, He Luping, Hou Guihua, Zhao
Xiangsheng, Yang Changhu, Wang Shiqing, and Yang Xueyan.
Guide to programing
overall development program for oil fields
1 Scope
This Standard specifies the main contents and PREPARING requirements of the overall
development program for oil fields. This Standard is applicable to PREPARING the overall
development program for oil fields.
[Translator’s Note. Words “PREPARING / PREPARE / PREPARATION” could also be
replaced by the words “programming / program”, as used by the original Chinese version
of this Standard (in standard title and terms definition).]
2 Normative references
The articles contained in the following documents have become part of this Standard
when they are quoted herein. For the dated documents so quoted, all the modifications
(excluding corrections) or revisions made thereafter shall not be applicable to this
Standard. For the undated documents so quoted, the latest editions shall be applicable to
this Standard.
GB 9052.1 Liquefied petroleum gas of oil-and-gas field
GB 9053 Natural gasoline
GB/T 19492 Classifications for petroleum resources/reserves
DZ/T 0217 Regulation of petroleum reserves estimate
SY/T 5087 Recommended practice for safe drilling operations involving hydrogen
sulfide
SY/T 5225 Safety production technology procedures for fire & explosive protection of
oil & gas drilling, development and storage transportation
SY 6320 Safety regulation of petroleum gathering-transporting in land oil-and-gas
field
State Economic and Trade Commission of People’s Republic of China (September, 29
2000) Safety Rules for Offshore Fixed Platform
3 Terms and definitions
For the purpose of this Standard, the following terms and definitions shall apply.
4.3 Other conditions
Other conditions required for PREPARING the overall development program include.
a) The reserves reports of oil-fields have been approved.
b) Other preliminary study works for development of oil-fields have been basically
completed.
c) The enterprise decision-makers have approved to start the project of overall
development program.
5 Outline of PREPARING overall development program for oil fields
5.1 Sub-volume
The contents of the whole program can be PREPARED by eight volumes, including.
a) Volume I General introduction;
b) Volume II Geology of oil fields; and oil reservoir engineering;
c) Volume III Drilling-and-completions; and oil production technology;
d) Volume IV Oil field surface / offshore development engineering;
e) Volume V Project organization and management; and production operation;
f) Volume VI Occupational health, safety and environmental protection;
g) Volume VII Investment estimate; and economic appraisal;
h) Volume VIII Annex.
5.2 Description
5.2.1 The national energy-saving and water-saving fundamental policy and principle shall
be throughout the PREPARING process of overall development program for oil-fields.
5.2.2 The PREPARING of the whole program shall include, but not limited to the above
eight volumes. It can be added as required.
5.2.3 The contents and understandings, from Volume I to Volume VII, shall not be
contradicted.
5.2.4 The conclusions of the special study reports in the contents and attachments of
Volume I throughout Volume VII shall be consistent in principle; If there are new
information and data supplement, or there exists difference with the special reports, it shall
point out the difference and demonstrate in details, and explain the reason.
c) Basic appraisal for seismic interpretation methods and results maps.
d) Seismic special processing data.
Seismic network diagram shall be attached.
7.1.4.2 Drilling data
Drilling data of oil-fields include.
a) Number of drilled exploratory wells and appraisal wells.
b) Accumulative drilling footage, coring footage, core length, recovery of core, and core
length of Oil-bearing core.
The exploration results table and coring summary table, etc. shall be attached.
7.1.4.3 Well logging data
Well logging data of oil-fields include.
a) Well logging series of drilled exploratory wells and appraisal wells.
b) Environmental correction and standardization of well logging data.
c) Basic appraisal for the data processing and interpretation of results.
Well logging series of statistical table, well logging interpretation data table, and typical
well logging interpretation diagram shall be attached.
7.1.4.4 Analytical test data
The analytical test data of oil-fields include core and fluid sampling situation, lab-test items
and quantity.
Sampling and analytical lab-test items table shall be attached.
7.1.4.5 Test, pilot production and pilot test data
Test, pilot production and pilot test data of oil-fields include.
a) Well number and well quantity of testing wells, well testing intervals and results.
b) Pilot production and pilot test profile when necessary.
Test, well testing and pilot production result summary table shall be attached.
7.2 Oil reservoir geological characteristics
7.2.1 Stratigraphic characteristics of oil (gas) beating series
Division and contrast of oil (gas) beating series stratum.
The Integrated histogram, characteristic diagram (table) of contrast sign, and profile map
of stratigraphic contrast of main oil (gas) beating series shall be attached.
7.2.2 Structural characteristics
The structural characterist...
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
PDF Preview: SY/T 10011-2006
|