|
US$459.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 30264.2-2013: Software engineering -- Automated testing capability -- Part 2: Personal capability maturity model
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 30264.2-2013 | English | 459 |
Add to Cart
|
4 days [Need to translate]
|
Software engineering -- Automated testing capability -- Part 2: Personal capability maturity model
| Valid |
GB/T 30264.2-2013
|
PDF similar to GB/T 30264.2-2013
Basic data | Standard ID | GB/T 30264.2-2013 (GB/T30264.2-2013) | | Description (Translated English) | Software engineering -- Automated testing capability -- Part 2: Personal capability maturity model | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L77 | | Classification of International Standard | 35.080 | | Word Count Estimation | 20,221 | | Quoted Standard | GB/T 11457 | | Regulation (derived from) | National Standards Bulletin 2013 No. 27 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the level of the model used to measure the ability of automated testing practitioners. This standard applies to the ability to evaluate automated testing of employees. | GB/T 30264.2-2013: Software engineering -- Automated testing capability -- Part 2: Personal capability maturity model
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Software engineering Automated testing capability Part 2. Personal capability maturity model
ICS 35.080
L77
National Standards of People's Republic of China
Automated testing software engineering capacity
Part 2. practitioners ability level model
Part 2. Personalcapabilitymaturitymodel
Issued on. 2013-12-31
2014-07-15 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 Automated Test Capability Model 1
4.1 Model Structure 1
4.2 Model 2 Content
5 employees automated testing capability 3
5.1 Contract Management 3
5.2 automated test plan design 4
5.3 automated test execution 6
5.4 automated test analysis and review 7
5.5 test results back 9
5.6 automated test process control 9
6 automated test capability level 10
6.1 execution stage 10
6.2 Demand level 11
6.3 Design of stage 12
6.4 Analysis of stage 12
6.5 Management level 13
Appendix A (informative) List of work products 14
References 16
Foreword
GB/T 30264 "automated testing software engineering capacity" is divided into the following sections.
--- Part 1. Test institutional capacity level model;
--- Part 2. Employees capability level model.
This section GB/T Part of 230,264.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This part of the National Information Technology Standardization Technical Committee (SAC/TC28) and focal points.
This section is drafted. Beijing University of Posts and Telecommunications, China Electronics Standardization Institute, Nanning square Software Technology Co., Ltd. Company
Division of Beijing Branch High-tech Co., Ltd. Cheng-yu, Chinese Academy of Sciences Institute of Automation.
The main drafters of this section. Yuan Yuyu, Hu Yu, Li Yinghua, GUO Xin-wei, Zhang Yang Yang, Wu Yujun, Huang Jiayu, Yang Tsui, high-Yi, Han Qiang,
Shi Guiji.
Automated testing software engineering capacity
Part 2. practitioners ability level model
1 Scope
This section GB/T 30264 is defined in the model used to measure the level of employees automated testing capabilities.
This section applies to the ability to evaluate the automated testing of employees.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 11457 IT software engineering terminology
3 Terms and Definitions
Terms and definitions GB/T 11457 apply as defined in this document.
4 Automated Test Capability Model
4.1 Model Structure
Structure employing automated testing ability of the model shown in Figure 1. Employing automated testing capability model over a plurality of test automation
Cheng composition within each process is divided into a plurality of Practice.
Employees grade automated testing ability of the model is divided into five, namely, the implementation level, demand level, level design, analysis and management levels.
Executive-level personnel should have the ability to perform automated testing, automated testing to ensure the normal automated test execution
get on. Demand level should have automated testing requirements analysis and planning capabilities to ensure the realization of the contract in the contract management process
Automation needs analysis and project evaluation, planning and realization of automated test planning and design process automation. Design level staff
Should have the ability to design automated testing, automated testing to ensure that the process of planning and design for test design automation. Analytical grade
The staff should have the ability to analyze and feedback automated testing, automated testing to ensure that the analysis and evaluation process for test and analysis
Review automation, and automated testing to ensure that the feedback process feedback for test automation. Management-level personnel should have automation
Process management capability testing, test automation can manage the automation project in the testing process to ensure the smooth implementation of automated testing.
Practitioners automated testing capability level evaluation model is based on the level of practice evaluation and formation.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 30264.2-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 30264.2-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 30264.2-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 30264.2-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|