|
US$929.00 · In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 30062-2013: Terminology of steel pipes and tubes
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 30062-2013 | English | 929 |
Add to Cart
|
7 days [Need to translate]
|
Terminology of steel pipes and tubes
| Valid |
GB/T 30062-2013
|
PDF similar to GB/T 30062-2013
Basic data | Standard ID | GB/T 30062-2013 (GB/T30062-2013) | | Description (Translated English) | Terminology of steel pipes and tubes | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | H48 | | Classification of International Standard | 77.140.75 | | Word Count Estimation | 42,427 | | Adopted Standard | API Std 5T1, NEQ | | Regulation (derived from) | National Standards Bulletin No. 25 of 2013 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the name of the pipe, size, weight, deviation, shape, surface quality, delivery status, defect common terms and definitions. This standard applies to the preparation of seamless steel tubes, welded steel pipes, cast steel, special | GB/T 30062-2013: Terminology of steel pipes and tubes---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Terminology of steel pipes and tubes
ICS 77.140.75
H48
National Standards of People's Republic of China
Pipe term
Issued on. 2013-12-17
2014-09-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
1 Scope 1
2 nomenclature 1
2.1 General terms 1
2.2 by manufacturing methods classification 1
2.3 by 3 cross-sectional shape classification
2.4 Classified by material composition 4
3 Dimensions, weight and deviation term 5
4 the shape, surface quality terminology 6
5 10 term delivery status
6 Defect Terminology 10
10 6.1 General terms
Imperfections and defects 6.2 Non-Weld 11
Weld imperfections and defects 6.3 22
Appendix A (informative) commonly used welding method terminology 32
Chinese index 33
English 36 Index
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The standard reference APIStd5T1 "defect term" formulation.
The standard proposed by China Iron and Steel Association.
This standard by the National Steel Standardization Technical Committee (SAC/TC183) centralized.
This standard is mainly drafted by. Pangang Group Chengdu Steel & Vanadium Co., Metallurgical Industry Information Standards Institute, Hengyang Valin Steel Tube Co.,
The company, Panyu Zhujiang Steel Pipe Co., Ltd., Tianjin Pipe Group Co., Ltd., Zhejiang Jiuli Special Materials Technology Co., Ltd., Jiangsu bound up
Specific New Material Co., Ltd. Shanghai on the stainless steel pipe, Zhejiang Jinzhou Pipeline Technology Co., Ltd., Baoji Petroleum Steel
Pipe limited liability company.
The main drafters of this standard. Li Qi, Yan such as Haitao, Dong Li, Zhao Bin, Wang Li tree, An Jianbo, Shao Yu, Wang Wei, the money in music, Yang Weifang,
Wang Hui, Li, Yang Fan.
Pipe term
1 Scope
This standard specifies the name of the pipe, size, weight, deviation, shape, surface quality, delivery status, defect common terms and definitions.
This standard applies to the preparation of seamless steel tubes, welded steel pipe standards at all levels, casting pipe, shaped steel, composite steel and metal hose and have
Off the technical documentation.
2 nomenclature
2.1 General terms
2.1.1
Pipe steelpipe (steeltube)
Open at both ends and having a hollow closed section, and the length and cross-section of a steel product typically has a circumference greater proportion.
NOTE. In the power piping, process piping and pipeline applications, the use of internal and external heat exchange medium pipe commonly used "tube", such as boiler water-cooled
Wall tubes, superheater tubes, reheater tubes; medium conveying pipe applications typically use "pipe", such as steel transport oil and gas, steam, water and other fluid medium
tube. In other applications, "tube" and "pipe" is used in general no distinction.
2.1.2
Tube pipebody
For welded steel pipe, steel pipe means does not include the entire weld and heat affected zone; other pipe, refers to the entire steel pipe.
2.1.3
Tube end pipeend
From the tip ends of the provisions of section steel pipe or pipe segment length range. Different standards for the length of the pipe end may have different requirements.
2.2 by manufacturing methods classification
2.2.1
Seamless steel pipe seamlesssteelpipe
Using perforated billet, or perforation after rolling (drawing, extruding, expanding the system, the top pressure, forging), or a method of manufacturing a forged machining without welding
Seam pipe.
2.2.1.1
Hot-rolled (extrusion, top, forging, expansion) seamless steel pipe hotroled (extruded, upset, forged, expanded) seamlesssteelpipe
Use in the recrystallization temperature above the final rolling (extrusion, top pressure, forging, expanding system) deformation pressure processing method for producing seamless steel tubes.
2.2.1.2
Cold drawn (rolled, spinning) seamless steel pipe colddrawn (roled, spun) seamlesssteelpipe
Carried out at the factory using ambient temperature of the final drawing mill (rolling, spinning) deformation pressure processing method for producing seamless steel tubes.
2.2.1.3
Boring seamless steel forging forgedandboredseamlesssteelpipe
After the tube by forging using drill boring molding method for manufacturing a seamless steel pipe.
2.2.2
Welded steel pipe weldedsteelpipe
Plate or strip Edge pressure is mechanically crimped and welded together forming (the term commonly used welding method, see Appendix A) is made with a welding
Seam steel pipe, referred to as pipe.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 30062-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 30062-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 30062-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 30062-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|