|
US$439.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 21468-2008: Pallet stackers and high-lift platform trucks -- Stability tests
Status: Obsolete
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 21468-2008 | English | 439 |
Add to Cart
|
3 days [Need to translate]
|
Pallet stackers and high-lift platform trucks -- Stability tests
| Obsolete |
GB/T 21468-2008
|
PDF similar to GB/T 21468-2008
Basic data | Standard ID | GB/T 21468-2008 (GB/T21468-2008) | | Description (Translated English) | Pallet stackers and high-lift platform trucks -- Stability tests | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J83 | | Classification of International Standard | 53.060 | | Word Count Estimation | 11,175 | | Date of Issue | 2008-02-28 | | Date of Implementation | 2008-08-01 | | Quoted Standard | GB/T 8591 | | Adopted Standard | ISO 5766-1990, IDT | | Regulation (derived from) | National Standard Approval Announcement 2008 No.3 (Total No.116) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the basic walk-test verification and Ride pallet stackers and high lift pallet truck stability. This standard applies to rated capacity of not more than 5000 kg, the door frame, loading platform, forks can be tilted or non-tilted stacking cars and vans. Also applies to work under the same conditions of load handling attachments equipped vehicles. This standard does not apply to vehicles with retractable device, does not apply to vehicles carrying suspended load can swing freely. | GB/T 21468-2008: Pallet stackers and high-lift platform trucks -- Stability tests---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Pallet stackers and high-lift platform trucks. Stability tests
ICS 53.060
J83
National Standards of People's Republic of China
GB/T 21468-2008/ISO 5766.1990
Pallet stackers and high-lift pallet truck
Stability Test
(ISO 5766.1990, IDT)
Posted 2008-02-28
2008-08-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard is identical with ISO 5766.1990 "Pallet stackers and high-lift pallet truck stability test" (in English).
This standard is equivalent translation ISO 5766.1990.
For ease of use, this standard made the following editorial changes.
--- "This International Standard" be replaced by "this standard";
--- Instead of using the decimal point as a decimal point ",". ",";
--- Deleted international standards foreword;
--- Removed all imperial units corresponding values, formulas and notes.
The standard proposed by China Machinery Industry Federation.
This standard is under the jurisdiction of Beijing Materials Handling Research Institute.
This standard is drafted by. Beijing Materials Handling Research Institute.
Participated in the drafting of this standard. Anhui Heli Co., Ltd., Zhejiang Hangzhou Construction Machinery Co., Ltd., Ningbo Ruyi shares have
Ltd., Zhejiang Connaught Machinery Co., Ltd. and Tianjin Port (Group) Co., Ltd.
The main drafters of this standard. Zhao Chunhui, Tao good red.
GB/T 21468-2008/ISO 5766.1990
Pallet stackers and high-lift pallet truck
Stability Test
1 Scope
This standard specifies the basic walk-test verification and ride pallet stackers and high-lift pallet truck stability.
This standard applies to the rated capacity of not more than 5000kg, door frame, loading platforms, forks can be tilted or not tilted stacking and transport vehicle
Transport vehicles. Also applies to work under the same conditions of load handling attachments equipped vehicles.
This standard does not apply to vehicles with a telescopic device (such as a door frame or fork), and does not apply to handling can swing freely suspended load
Dutch vehicles.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 8591 moving machinery - Seat index point (GB/T 8591-2000, eqv ISO 5353.1995)
3 test purposes
3.1 Normal operating conditions
Basic test specified in this standard is used to verify pallet stackers and high lift pallet truck is reasonable and under normal operating conditions following
Good stability when properly used has, namely.
a) substantially perpendicular to the mast, the fork is relatively level, solid, stacking operation performed on a flat, level and paved roads;
b) After the mast or fork tilt (if possible), at a low load (run) position, running on a solid, flat and paved roads;
c of job) load in the vehicle about the centroid of the longitudinal center plane.
3.2 Non-normal operating conditions
When not working with the same conditions as specified in 3.1, shall be used.
Additional job stability test 1) GB/T 21467 industrial vehicles stacked under certain conditions mast anteversion
a) comply with other standards (for example, GB 214671) different vehicle under the specified conditions); or
b) the stability of the relevant parties agreed to test the stability requirements but not less than prescribed under normal operating conditions (see 3.1) of the
vehicle.
4 Stability Test
4.1 Test requirements
Stability of the vehicle, one of the following authentication methods should be used for verification. In case of dispute, the tilt platform shall serve as the arbitration law
method.
4.2 authentication method
4.2.1 tilt platform
You should use about one side inclined platform. The vehicle to be tested according to the conditions specified in 4.3, placed in a horizontal state of the initial test level
Stage, the respective positions are given in Table 2 were tested sequentially.
When each test, the test platform shall be gradually tilted to the inclination specified in Table 2. If the vehicle passes all the tests without tipping, the
Considered stable.
GB/T 21468-2008/ISO 5766.1990
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 21468-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 21468-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 21468-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 21468-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|