|
US$279.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 21409-2008: Glass plant, pipeline and fittings -- General rules for testing, handling and use
Status: Obsolete
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 21409-2008 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Glass plant, pipeline and fittings -- General rules for testing, handling and use
| Obsolete |
GB/T 21409-2008
|
PDF similar to GB/T 21409-2008
Basic data | Standard ID | GB/T 21409-2008 (GB/T21409-2008) | | Description (Translated English) | Glass plant, pipeline and fittings -- General rules for testing, handling and use | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G94 | | Classification of International Standard | 71.120; 81.040.30 | | Word Count Estimation | 7,754 | | Date of Issue | 2008-02-01 | | Date of Implementation | 2008-07-01 | | Quoted Standard | ISO 3585 | | Adopted Standard | ISO 3586-1976 (2005), IDT | | Regulation (derived from) | National Standard Approval Announcement 2008 No.2 (Total No.115) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the glass equipment, inspection to install and use general rules pipes and pipe fittings. This standard does not involve glass piece design. When installing equipment or piping should comply with the relevant safety procedures for pressure equipment should comply with the rules relating to the pressure vessel. | GB/T 21409-2008: Glass plant, pipeline and fittings -- General rules for testing, handling and use
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Glass plant, pipeline and fittings. General rules for testing, handling and use
ICS 71.120; 81.040.30
G94
National Standards of People's Republic of China
GB/T 21409-2008/ISO 3586. 1976 (2005)
Glass equipment, pipes and fittings
The general rule testing, installation and use
(ISO 3586. 1976 (2005), IDT)
Posted 2008-02-01
2008-07-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard is identical with ISO 3586. 1976 (2005) "Glass equipment, pipes and fittings --- testing, installation and use of the general rule."
(In English).
This standard is equivalent translation ISO 3586. 1976 (2005).
For ease of use, this standard made the following editorial changes.
--- "This International Standard" by "this standard";
--- Delete foreword international standards;
--- Some of the statements apply to international standards to apply to our standard formulation;
--- Remove the "Normative references" in the ISO 4704 "glass equipment, pipes and fittings --- glass assembly" and ISO 3587 "Glass
Glass equipment, pipes and fittings --- 15mm ~ 150mm diameter pipe and fittings versatility and interchangeability, "two documents, because
These two files in a standard text virtually no reference.
The standard proposed by China Petroleum and Chemical Industry Association.
This standard by the National Non-metallic chemical equipment Standardization Technical Committee centralized (SAC/TC162).
This standard was drafted. Beijing Glass Instrument Factory, Tianhua Institute of Chemical Machinery and Automation.
The main drafters of this standard. Wu Wenling, Zhang Branch, Liu Bojun.
GB/T 21409-2008/ISO 3586. 1976 (2005)
Glass equipment, pipes and fittings
The general rule testing, installation and use
1 Scope
This standard specifies the general rules for glass equipment, pipes and fittings test installation and use.
This standard does not involve the design of the glass pieces.
When installing piping or equipment shall comply with the relevant safety procedures for pressure equipment must also comply with the rules relating to the pressure vessel.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
ISO 3585 borosilicate glass 3.3 performance
3 Materials
Physical and chemical properties of the structural material of glass equipment shall comply with the requirements of ISO 3585.
The working fluid in contact with the material of the gasket, the manufacturer's instructions should be used.
4 test
4.1 factory inspection
As all parts of the pressure vessel equipment, the manufacturer shall conduct regular stress testing.
Hydraulic test pressure test should be used.
All pressure tests should be recorded in detail, in order to review past tests and to provide users with inspection certificate.
4.2 inspected by the user
Glass equipment and the assembled system, and its maximum operating temperature must not exceed the maximum working pressure recommended by the manufacturer data.
4.2.1 no manufacturer or supplier sectors agreed by both parties participate, the user shall not carry out on-site inspection of pressure.
When assembly 4.2.2 pipe pressure test site, should also be used hydraulic test. When the device is connected, it should pay attention to drain the system empty
Gas, in order to ensure that the various stresses of the device is not connected by the assembly or by pressure testing equipment caused. Added to the total on the entire assembly
Pressure must not exceed its maximum operating pressure. Equipment should have the proper screen protection layer to protect the operator.
Note. measuring overall system pressure at a certain point, indicating the pressure value with the pressure of the system deviation, with the difference of the static liquid
Head values. Therefore, if the pressure is not measured at the lowest point of assembly were, it is estimated that there will be a pressure higher than the indicated values.
4.2.3 above the standpipe assembly of hydrostatic head as the hydraulic pressure source. If this is not possible in practice, in order to reliably, can be
Hydraulic pump.
4.2.4 In fact, if the hydraulic test method can not be used, you can use the device with a water seal air pressure to test its air pressure
10kPa (Figure 1), and check whether the junction leakage. If you find leaks, before the device begins working pressure should be reduced
force. When used under vacuum conditions, equipment to be evacuated by the pressure with respect to the known internal volume increase can be detected any leaks.
4.2.5 Test Method should be a detailed written report, its purpose is to carry out the inspection and subsequent security operations, and user-friendly system
Factory inspection process can be made to make this record. After the inspection, any equipment necessary changes or adjustments must be recorded in the report.
GB/T 21409-2008/ISO 3586. 1976 (2005)
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 21409-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 21409-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 21409-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 21409-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|