Path: Home > GB/T > Page257 > GB/T 21225-2007 Home > Standard_List > GB/T > Page257 > GB/T 21225-2007
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 21225-2007 | English | 859 |
Add to Cart
|
6 days [Need to translate]
|
Emergency power supply with inverter
| Valid |
GB/T 21225-2007
|
PDF similar to GB/T 21225-2007
Basic data | Standard ID | GB/T 21225-2007 (GB/T21225-2007) | | Description (Translated English) | Emergency power supply with inverter | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K85 | | Classification of International Standard | 29.200 | | Word Count Estimation | 34,372 | | Date of Issue | 2007-12-03 | | Date of Implementation | 2008-05-20 | | Regulation (derived from) | China Announcement of Newly Approved National Standards No. 12 of 2007 (No. 112 overall) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the inverter emergency power supply (referred EPS) of the definition, product classification and characterization parameters, technical requirements, test methods, inspection rules and face logo, packaging, transportation Discovery and storage. This standard applies to general industrial, civil and other places in the state of emergency lighting, power, etc., and to provide AC power for mixed workloads EPS. This standard applies to single-phase or three-phase output frequency sine wave, rated voltage not exceeding 1000 V, power of 0. 5 kW-1 MW of EPS. | GB/T 21225-2007: Emergency power supply with inverter---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Emergency power supply with inverter
ICS 29.200
K85
National Standards of People's Republic of China
Emergency power inverter
Posted 2007-12-03
2008-05-20 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions 2
4 Categories and characteristic parameter 6
5 Technical requirements 8
6 Test methods 13
7 Inspection rules 20
8 signs, packaging, transportation and storage 22
Appendix A (Normative Appendix) EPS 24 categories and for the environment
Technical Appendix B (Normative Appendix) EPS intermediate DC circuit and/battery circuit of claim 25
Derating factor Appendix C (Normative Appendix) EPS altitude of 1000m or more in 26
Special Conditions Annex D (normative) determined by the purchaser 27
Annex E (informative) Guidelines for the use (circuit configuration) 28
References 29
Foreword
The Standard Appendix A, Appendix B, Appendix C and Appendix D is normative appendix, Appendix E is an information appendix.
The standard proposed by China Electrical Equipment Industrial Association.
This standard by the National Standardization Technical Committee on Electronic electrodynamic (SAC/TC60) centralized.
This standard was drafted. Qingdao Economic and Technological Development Zone of EC Technology Development Co., Ltd., Dalian Biao State Emergency Power Supply Co., Ltd., Qingdao
City of Quality and Technical Supervision, China Architecture Design Institute, Nanjing First Second Power Equipment Co., Ltd., Shanghai Fudan Science and Technology Company Limited
Secretary, Hefei Sunshine Power Co., Ltd., Xi'an Institute of Power Electronics.
The main drafters of this standard. Sui Xueli, INDUSTRIAL ENGINEERING, Hua Ning, Li Binghua, Zhang sound, Zhang Haibo, Wang Ao students, Cao Renxian, Zhouguan Yun, Yang Guodong,
Well burning pipe, Wei red flag.
This standard is the first release.
Emergency power inverter
1 Scope
This standard specifies the inverter emergency power supply (referred to as EPS) definition, product classification and characteristic parameters, technical requirements, test methods, inspection
Rules and signs, packaging, transportation and storage.
This standard applies to general industrial, civil and other places in the state of emergency to provide AC power to the lighting, power, etc., and mixed load
The EPS.
This standard applies to single or three phase output sine wave frequency, rated voltage not exceeding 1000V, power 0.5kW ~ 1MW
The EPS.
Note 1. The output voltage exceeds 1000V or power exceeding 1MW of EPS, the output frequency is not the frequency (50Hz or 60Hz) and/or non-sinusoidal wave EPS should
The supplier and the purchaser by the consultation requirements.
Note 2. The high-intensity discharge lamps, 0ms conversion of EPS and other special purpose load in addition to meeting the requirements of this standard, should also meet the supplier and purchaser Association
Suppliers for determining requirements.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 191-2000 Packaging - Pictorial signs (eqv ISO 780.1997)
GB/T 2423.1-2001 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold (idt IEC
60068-2-1.1990)
GB/T 2423.2-2001 Environmental testing for electric and electronic products Part 2. Test methods Test B. high temperature (idt IEC
60068-2-2. 1974)
GB/T 2423.5-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Ea and guidance. Shock
(Idt IEC 60068-2-27. 1987)
GB/T 2423.8-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Ed. Free fall (idt IEC
60068-2-32.1990)
GB/T 2423.9-2001 Environmental testing for electric and electronic products Part 2. Test methods Test Cb. Damp heat, equipment
(Idt IEC 60068-2-56. 1988)
GB/T 2900.1 Electrotechnical Basic terminology
GB/T 2900.11 Battery Terminology
GB/T 2900.33 Electrotechnical terminology - Power Electronics (GB/T 2900.33-2004, IEC 60050-551.1998 and
IEC 60050-551-20.2001, IDT)
GB/T 3797-2005 Electric Control Equipment
GB/T 3859.1 Semiconductor converters of basic requirements (GB/T 3859.1-1993, eqv IEC 60146-1-1.1991)
GB/T 3859.4 Semiconductor converters DC to DC converter comprising a semiconductor self-commutated converter (GB/T 3859.4-
2004, IEC 60146-2.1999, IDT)
GB 4208 housing protection (IP Code) (GB 4208-1993, eqv IEC 60529. 1989)
GB/T 4365 Electrotechnical terminology Electromagnetic compatibility (GB/T 4365-2003, idt IEC 60050-161.1990)
GB 7251.1-2005 Low-voltage switchgear and control equipment Part 1. Type - tested and partially type-tested assemblies provided
Price & DeliveryUS$859.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 21225-2007: Emergency power supply with inverter
Status: Valid
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 21225-2007_English be delivered?Answer: Upon your order, we will start to translate GB/T 21225-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 21225-2007_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 21225-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |