GB/T 32620.2-2016 PDF English
Search result: GB/T 32620.2-2016
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
GB/T 32620.2-2016 | English | 115 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Lead-acid batteries used for electric road vehicles - Part 2: Kinds of products and specifications
| Valid |
PDF Preview: GB/T 32620.2-2016
GB/T 32620.2-2016: PDF in English (GBT 32620.2-2016) GB/T 32620.2-2016
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 29.220.20
K 84
Lead-acid batteries used for electric road vehicles -
Part 2. Kinds of products and specifications
ISSUED ON. FEBRUARY 24, 2016
IMPLEMENTED ON. SEPTEMBER 01, 2016
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
China.
3. No action is required - Full-copy of this standard will be automatically &
immediately delivered to your EMAIL address in 0~60 minutes.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Battery model preparation and polarity identification ... 4
4 Battery product appearance structure, specifications models and sizes ... 6
5 Battery terminal location and dimensions ... 8
Foreword
GB/T 32620 “Lead-acid batteries used for electric road vehicles” is divided into
two parts.
- Part 1. Technical condition;
- Part 2. Kinds of products and specifications.
This part is part 2 of GB/T 32620.
This part was drafted in accordance with the rules given GB/T 1.1-2009.
This part was proposed by China Electrical Equipment Industry Association.
This part shall be under the jurisdiction of the National Standardization
Technical Committee on Lead-acid Battery (SAC/TC 69).
The main drafting organizations of this part. Chaowei Power Co., Ltd., Anhui
Leoch Power Technology Co., Ltd., Anhui Hongda Power Co., Ltd., Zhejiang
Guyue Power Co., Ltd., Shenyang Battery Research Institute, Fujian Yaheng
Power Technology Group Co., Ltd., Zhejiang Liban Energy Technology Co.,
Ltd., Shandong Shengyang Power Co., Ltd., Jiangsu Huafu Chuneng New
Technology Co., Ltd., Dongbin International (Wujiang) Battery Co., Ltd.,
Yangzhou Golden Happy Power Co., Ltd., Chongqing Yusiang Battery Co.,
Ltd., Zhangzhou Huawei Power Technology Co., Ltd., National Chemical
Power Products Quality Supervision and Inspection Center.
The main drafters of this part. Deng Jidong, Zhou Mingming, Dong Jie, Fang
Liping, Cao Miaogen, Xie Zhenhua, Qiao Fenghua, Ma Jianping, Zhou
Shoubin, Li Laichao, Dai Xiuling, Bai Qiang, Ke Zhimin, Jin Miao, Xie Shuang.
Lead-acid batteries used for electric road vehicles -
Part 2. Kinds of products and specifications
1 Scope
This part of GB/T 32620 specifies the model compilation and polarity
identification, battery model and classification, battery terminal location,
terminal size and marking of the lead-acid batteries used for electric road
vehicles.
This part is applicable to the lead-acid batteries (hereinafter referred to as
batteries) and batteries pack having a rated capacity of 32 Ah (inclusive) above
for electric vehicles, electric tricycles, golf carts, tourist vehicles, electric
motorcycles which use the battery as the main power source.
This part does not apply to battery and battery pack which are used for start-up,
electric power, traction and other purposes.
2 Normative references
The following documents are essential to the application of this document. For
the dated documents, only the versions with the dates indicated are applicable
to this document; for the undated documents, only the latest version (including
all the amendments) are applicable to this Standard.
JB/T 2599 Name, type organization and naming convention of lead-acid
battery
3 Battery model preparation and polarity
identification
3.1 Model preparation
Battery model shall be prepared in accordance with the requirements of JB/T
2599. Specifically. product type is identified by the first English capital letter
“EV” of the Chinese character “electric vehicles”. AND the detailed
nomenclature is as shown in Figure 1 (enterprises can determine their own
“other” characteristic identifications in accordance with the actual situation and
...... Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|