|
US$274.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 20725-2025: Microbeam analysis - Electron probe microanalysis - Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
Status: Valid GB/T 20725: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 20725-2025 | English | 274 |
Add to Cart
|
3 days [Need to translate]
|
Microbeam analysis - Electron probe microanalysis - Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
| Valid |
GB/T 20725-2025
|
| GB/T 20725-2006 | English | 214 |
Add to Cart
|
3 days [Need to translate]
|
Electron probe microanalysis guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
| Valid |
GB/T 20725-2006
|
PDF similar to GB/T 20725-2025
Basic data | Standard ID | GB/T 20725-2025 (GB/T20725-2025) | | Description (Translated English) | Microbeam analysis - Electron probe microanalysis - Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G04 | | Classification of International Standard | 71.040.99 | | Word Count Estimation | 14,150 | | Date of Issue | 2025-03-28 | | Date of Implementation | 10/1/2025 | | Older Standard (superseded by this standard) | GB/T 20725-2006 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 20725-2025: Microbeam analysis - Electron probe microanalysis - Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
National Standard of the People's Republic of China
ICS 71.040.99CCS G 04
Microbeam analysis Electron probe microscopy
Guidelines for the analysis of neutral points by spectroscopy
Microbeam analysis-Electron probe microanalysis-Guidelines for qualitative
point analysis by wavelength dispersive X⁃ray spectrometry
(ISO 17470.2014, IDT)
2025-03-28 Release
2025-10-01 Implementation
State Administration for Market Regulation
The National Standardization Administration issued
Replace GB/T 20725-2006
Table of contents
Preface Ⅲ
Introduction Ⅳ
1 Scope...1
2 Normative references ...1
3 Terms and Definitions 1
4 Abbreviations 1
5 Equipment...2
6 Qualitative analysis process 2
7 Test Report...4
Appendix A (Informative) Example of a test report for qualitative analysis of stainless steel samples using EPMA ...6
References 8
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting is required.
This document replaces GB/T 20725-2006 "Guidelines for Electron Probe Microanalysis of Polarization Points by Spectroscopy" and is compatible with GB/T 20725-
Compared with.2006, in addition to structural adjustments and editorial changes, the main technical changes are as follows.
a) Changed the term “high-order diffraction” to “higher-order diffraction” and corrected the definition (see 3.1, 3.1 of the.2006 Edition);
b) Change the content in the note "When the intensity of the identified spectral peak is close to the background intensity, it means that the suspicious peak is not the background." to the main text (see
6.3.1, Note to 6.3.1 of the.2006 edition);
c) The values of confidence level and probability of peak existence have been modified (see 6.3.1, 6.3.1 of the.2006 edition).
This document is equivalent to ISO 17470.2014 "Guidelines for qualitative point analysis by electron probe microanalysis spectroscopy in microbeam analysis".
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document was proposed and coordinated by the National Microbeam Analysis Standardization Technical Committee (SAC/TC 38).
This document was drafted by. Shanghai Institute of Ceramics, Chinese Academy of Sciences.
The main drafters of this document are Zeng Yi, Li Xiangting and Peng Fan.
This document was first published in.2006 and this is the first revision.
Introduction
Electron probe microanalysis is often used to qualitatively identify the elements present in a micro-region of a sample. In order to avoid erroneous analysis results,
It is necessary to standardize the measurement conditions and element identification methods.
Microbeam analysis Electron probe microscopy
Guidelines for the analysis of neutral points by spectroscopy
1 Scope
This document gives the results of using an electron probe microanalyzer or a spectrometer accessory to a scanning electron microscope to obtain the
A method of using X-ray spectra to identify elements and confirm the presence of specific elements.
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB/T 30705-2014 Microbeam analysis electron probe microanalysis spectroscopy experimental parameters determination guide (ISO 14594.
2009, MOD)
Note. There is no technical difference between the contents cited in GB/T 30705-2014 and those cited in ISO 14594.2003.
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Higher order reflections
Spectral peaks appear corresponding to diffraction angles of n = 2, 3, and 4.
Note. In a wave spectrometer (WDS), X-rays are diffracted according to Bragg’s law nλ=2dsinθ, where λ is the wavelength of the X-rays, d is the interplanar spacing of the crystal, and θ is the diffraction distance.
The diffraction angle is n = 2, 3, 4, and n is an integer.
3.2
point analysis
The incident electron beam is fixed to illuminate the selected area of the sample surface for analysis.
NOTE. This method also includes the analysis of a very small area of the sample surface where the incident electron beam is scanned rapidly. The maximum electron beam size or the electron beam scanning range is
The range is determined by the fact that the relative intensity of X-rays does not change when the analysis area is expanded.
3.3
Rowland circle
The focusing circle of the X-ray source, diffraction crystal and detector satisfies the Bragg diffraction conditions.
3.4
X-ray line table
X-ray data sheet for EPMA qualitative analysis.
Note. The X-ray table for EPMA qualitative analysis lists the wavelength values of the K, L, and M lines of the element observed on each diffraction crystal.
The relative intensity, half-height width, interplanar spacing of the diffraction crystal and the wavelength of the satellite peak of each peak are given.
4 Abbreviations
EPMA. Electron probe microanalysis
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 20725-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 20725-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 20725-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 20725-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 20725-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 20725-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|