GB/T 15385-2011 (GB/T15385-2011, GBT 15385-2011, GBT15385-2011)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 15385-2011 | English | 439 |
Add to Cart
|
3 days [Need to translate]
|
Method for hydraulic burst test of gas cylinder
| Obsolete |
GB/T 15385-2011
|
| GB/T 15385-2022 | English | 185 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Method for hydraulic burst test of gas cylinder
| Valid |
GB/T 15385-2022
|
Newer version: GB/T 15385-2022 Standards related to: GB/T 15385-2022
| Standard ID | GB/T 15385-2011 (GB/T15385-2011) | | Description (Translated English) | Method for hydraulic burst test of gas cylinder | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J74 | | Classification of International Standard | 23.020.30 | | Word Count Estimation | 10,173 | | Date of Issue | 2011-12-30 | | Date of Implementation | 2012-06-01 | | Older Standard (superseded by this standard) | GB 15385-1994 | | Quoted Standard | GB/T 13005 | | Drafting Organization | Beijing Tianhai Industry Co., Ltd. | | Administrative Organization | National Standardization Technical Committee cylinders | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 22 of 2011 | | Proposing organization | National Standardization Technical Committee cylinder (SAC/TC 31) | | Issuing agency(ies) | Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China; Standardization Administration of China | | Summary | This standard specifies the cylinders hydraulic burst test method and test device 's basic requirements. This standard applies to nominal working pressure of 1MPa ~ 35MPa, the nominal volume of 0. 4L ~ 3000L of seamless steel gas cylinders, welding gas cylinders, seamless aluminum alloy gas cylinders and winding cylinders hydraulic burst test. This standard does not apply to industrial use non-refillable welded steel cylinders. | GB/T 15385-2011
Method for hydraulic burst test of gas cylinder
ICS 23.020.30
J74
National Standards of People's Republic of China
Replacing GB 15385-1994
Hydraulic cylinder burst test methods
Issued on. 2011-12-30
2012-06-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
Accordance with the standards GB/T 1.1-2009. Drafting Rules "Standardization Guide Part 1 standard structure and preparation of" given.
This standard replaces GB 15385-1994 "hydraulic cylinder burst test methods."
This standard compared with GB 15385-1994, the main amendments are as follows.
--- Expanding the scope of the standard;
--- Test principle and clear objectives;
--- Perfect test equipment system;
--- Read visually by the test data to the sensor directly into the computer;
--- Provisions accuracy of the flow and pressure sensors requirements;
--- Cancel the provisions of this Rule shall belong to the post operation of law or testing procedures;
--- Canceled must set aside a predetermined grid requirements on the bottle before the test;
--- Rate stress test cylinders made when different categories of limited scope;
--- Treatment process often special circumstances clearly defined test;
--- Detailed provisions inspection, measurement and test results recorded content.
This standard by the National Standardization Technical Committee cylinder (SAC/TC31) presented and interpreted.
This standard was drafted. Beijing Tianhai Industry Co., Ltd., Shenyang 斯林达安科 New Technology Co., Ltd. Hangzhou Jinniu Machinery
the company.
Drafters of this standard. Shen Wu Yue, Li Xiuzhen, Deng Hong, Chen fragrant roots.
This standard replaces the standards previously issued as follows.
--- GB 15385-1994.
Hydraulic cylinder burst test methods
1 Scope
This standard specifies the cylinder hydraulic blasting Test Method and apparatus basic requirements.
This standard applies to nominal working pressure 1MPa ~ 35MPa, nominal volume of 0.4L ~ 3000L of seamless steel gas cylinders, welding
Cylinders, seamless aluminum alloy cylinders and hydraulic cylinders wound burst test.
This standard does not apply to industrial non-refillable welding cylinders.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 13005 cylinders term
3 Terms and definitions, symbols
3.1 Terms and Definitions
GB/T 13005 and established the following terms and definitions apply to this document.
3.1.1
Test bottle testingcylinder
To be tested or being tested cylinders.
3.1.2
Burst pressure burstpressure
Cylinders blasting process actually reach the maximum pressure.
3.1.3
Yield pressure yieldpressure
Under the action of the internal pressure cylinders, cylinder wall thickness along the material begins to yield when full pressure.
3.2 Symbol
The following symbols apply to this document.
pb --- hydraulic test bottle burst pressure, MPa;
py --- test bottles yield pressure, MPa;
Volume deformation rate E --- rupture of the test bottle,%;
Actual volume V --- test bottle, mL;
Volume deformation values \u200b\u200bΔV --- rupture of the test bottle, mL;
A --- burst pressure test bottles at the total amount of water, mL;
B --- pressure in the pressure pipe burst under the pressure of the water, mL;
βt --- average compression coefficient test water temperature and the water burst pressure, MPa-1; βt calculation in Appendix A.
...
|