|
US$194.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 12859.201-2012: Piezoelectric ceramic resonators -- A specification in the quality assessment System for electronic components (IECQ) -- Part 2-1: Blank detail specification -- Assessment level E
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 12859.201-2012 | English | 194 |
Add to Cart
|
3 days [Need to translate]
|
Piezoelectric ceramic resonators -- A specification in the quality assessment System for electronic components (IECQ) -- Part 2-1: Blank detail specification -- Assessment level E
| Valid |
GB/T 12859.201-2012
|
PDF similar to GB/T 12859.201-2012
Basic data | Standard ID | GB/T 12859.201-2012 (GB/T12859.201-2012) | | Description (Translated English) | Piezoelectric ceramic resonators -- A specification in the quality assessment System for electronic components (IECQ) -- Part 2-1: Blank detail specification -- Assessment level E | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L21 | | Classification of International Standard | 31.140 | | Word Count Estimation | 10,110 | | Older Standard (superseded by this standard) | GB/T 12861-1991; GB/T 12863-1991 | | Quoted Standard | GB/T 2828.1-2003; GB/T 12859.1-2012; GB/T 12859.2-2012; IEC QC 001005-2003 | | Adopted Standard | IEC 61253-2-1-1993, IDT | | Regulation (derived from) | National Standards Bulletin No. 28 of 2012 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 12859.201-2012: Piezoelectric ceramic resonators -- A specification in the quality assessment System for electronic components (IECQ) -- Part 2-1: Blank detail specification -- Assessment level E
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS31.140
L21
National Standards of People's Republic of China
GB/T 12859.201-2012/IEC 61253-2-1.1993
Replacing GB/T 12861-1991, GB/T 12863-1991
Quality assessment system for electronic components
Piezoelectric ceramic resonators
Part 2-1. Blank detail specification - Assessment level E ---
AspecificationintheIEC qualityassessmentsystemforelectronic
components (IEC Q) -Part 2-1. Blankdetailspecification-AssessmentlevelE
(IEC 61253-2-1.1993, IDT)
Issued on. 2013-02-15 2012-11-05 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 12859 "Quality Assessment System for Electronic Components piezoelectric ceramic resonator" is divided into the following parts.
--- Part 1. Generic specification --- Qualification approval;
--- Part 2. Sectional specification --- Qualification approval;
--- Part 2-1. Blank detail specification --- Assessment level E.
This is Part 2-1 GB/T 12859 in.
Rules in this section in accordance with GB/T 1.1-2009 given draft.
This Part replaces GB/T 12861-1991 "electronic equipment - Piezoelectric ceramic resonators for low frequency Blank detail specification for piezoelectric ceramic resonators
Assessment level E (Applicable for certification) "and GB/T 12863-1991" electronic equipment - Blank detail specification for piezoelectric ceramic resonators high
Frequency piezoelectric ceramic resonators Assessment level E (Applicable for certification) ", compared with the GB/T 12861-1991 and GB/T 12863-1991,
The main changes are as follows.
--- Low-frequency and high-frequency piezoelectric ceramic resonators piezoelectric ceramic resonator requires combined into a single blank detail specification;
--- According to specification modify the citations.
This section uses the translation method identical with IEC 61253-2-1.1993 "Piezoelectric ceramic resonators IEC Electronic Components Quality Assessment body
Department - Part 2. Sectional specification --- Qualification approval Section 1. Blank detail specification --- Assessment level E ".
This section also made the following editorial changes.
--- With GB/T 2828.1-2003 instead of IEC 410. 1973 "counter check sampling plan and procedures", the former and the latter in use
No technical difference.
This part is proposed by the Ministry of Industry and Information Technology of the People's Republic of China.
This part of the National Focal frequency control and selection piezoelectric Standardization Technical Committee (SAC/TC182) devices.
This section drafted by. China Electronic Components Industry Association Branch of the piezoelectric crystal, Zhejiang Jia Kang Electronics Co., Ltd.
The main drafters of this section. Zhang Yi, Jiang Liansheng, Dai Liming, Shen gold leaf.
This part of the standard replaces the previous editions are.
--- GB/T 12861-1991, GB/T 12863-1991.
GB/T 12859.201-2012/IEC 61253-2-1.1993
Introduction
Blank detail specification of this specification is a supplementary document provides a detailed specification of the format, layout and minimum content requirements. It is not used
Detailed specification of these requirements may be considered non-compliant specification.
Developing detailed specifications, should be considered in the content specification 2.3.
Fill in the following table at a position corresponding to the bracketed numbers marked.
Detailed specification of identification
[1] authorized the release of detailed specifications institutions. the International Electrotechnical Commission or national standards bodies.
[2] IEC or National Standards number of the detail specification, additional information, release date and system requirements of national standards.
[3] IEC or national standards, general specification and version numbers.
[4] Blank detail specification number.
Identification of the resonator
[5] Description of the resonator type.
[6] The typical structure information (when applicable).
[7] Outline drawing with main dimensions of these dimensions is the frequency control and selection Device outline drawing guidelines and/or national standards or
International Standard for appearance requirements for compatibility is very important. These dimensions can also be given in the detailed specification of the appendix.
[8] assessed the level of use and/or use an assessment level of application groups.
Note. The assessment of the level of detail should regulate the use of GB/T 12859.2-2012 specification 3.5.4 select each test group as long as the same one.
Blank detail specification may be used in combination of several assessment level.
[9] The most important characteristic of the reference data to enable comparison of the different resonators.
Issuing authority the detail specification [1] specification version [2]
Release date
Page of Page
According to GB/T 12859.1-2012 [3]
Qualification approval assessed quality components
[4]
Dimensions (see Table 1) [7]
(Third Angle)
In this column's size range, allowing other shapes.
Electronic equipment - Piezoelectric ceramic resonators [5]
[6]
Assessment level. E [8]
Performance Level.
[9]
NOTE. The detailed specification accredited valid information components given in IEC QC001005 in.
GB/T 12859.201-2012/IEC 61253-2-1.1993
Quality assessment system for electronic components
Piezoelectric ceramic resonators
Part 2-1. Blank detail specification - Assessment level E ---
1 General Data
1.1 Recommended installation method
See GB/T 12859.2-2012 2.3.3.
1.2 Dimensions
Table 1 Dimensions in millimeters
Housing and/or related Type Size
WHTL
Note. The size should be a maximum or nominal value and tolerances are given.
1.3 ratings and characteristics
a) operating frequency range, --- Hz ~ --- Hz (see Table 2);
b) Operating frequency deviation (initial frequency accuracy), ---%;
c) measuring the operating frequency of the circuit (see FIG. 1);
d) rated voltage;
e) Climate categories. -/-/-;
f) resonance resistance (see Table 2);
g) Insulation resistance;
h) temperature characteristics.
GB/T 12859.201-2012/IEC 61253-2-1.1993
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 12859.201-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 12859.201-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 12859.201-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 12859.201-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|