Path: Home > GB > Page122 > GB 474-2008 || Home > Standard_List > GB > Page122 > GB 474-2008
GB 474-2008 English PDF
Price & DeliveryUS$135.00 · In stock · Download in 9 secondsGB 474-2008: [GB/T 474-2008] Method for preparation of coal sample Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
GB 474: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB 474-2008 | English | 135 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
[GB/T 474-2008] Method for preparation of coal sample
| Valid |
| GB 474-1996 | English | 319 |
Add to Cart
|
3 days
|
Preparation of coal sample
| Obsolete |
| GB 474-1983 | English | RFQ |
ASK
|
3 days
|
Methods for the preparation of coal sample
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB 474-2008
GB 474-2008: [GB/T 474-2008] Method for preparation of coal sample
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB474-2008
D 21
NATIONAL STANDARD
OF THE PEOPLE'S REPUBLIC OF CHINA
GB474-2008
Replacing GB 474-1996
Method for Preparation of Coal Sample
(ISO 18283.2006, Hard Coal and Coke-Manual Sampling, MOD)
Issued on: DECEMBER 04, 2008
Implemented on: MAY 01, 2009
Jointly Issued by. General Administration of Quality Supervision,
Inspection and Quarantine of the People's Republic of
China;
Standardization Administration of the People's
Republic of China.
GB
Table of Contents
Foreword... I
1 Scope... 1
2 Normative References... 1
3 Terms and Definitions... 1
4 General and Precision of Sample Preparation... 2
4.1 General of Sample Preparation... 2
4.2 Sample Preparation Precision... 3
5 Apparatus... 3
6 Constitution of Sample... 4
7 Division... 5
7.1 General... 5
7.2 Minimum Mass of the Divided Sample... 5
7.3 Mechanical Methods... 6
7.4 Manual Methods... 12
8 Reduction... 15
9 Mixing... 16
10 Air-drying... 16
11 Preparation of Various Coal Samples... 17
11.1 Types of Coal Sample... 17
11.2 Moisture Sample of Coal... 17
11.3 General-analysis Test Sample of Coal... 19
11.4 Common Sample of Coal... 21
11.5 Size Analysis Sample of Coal... 22
11.6 Coal Samples for other Tests... 22
12 Reserve Sample... 23
Appendix A (Informative) Comparison of Chapter and Article Numbers between this Standard
and ISO 18283.2006(E)... 24
Appendix B (Informative) Technical Differences between this Standard and ISO 18283.
2006(E) and the Reasons... 26
Appendix C (Normative) Verification for Precision of Sample Preparation and Assays and
Bias Test... 28
Appendix D (Normative) Method for Flotation of Coal Sample... 30
IForeword
Chapter 4, Chapter 6, Chapter 7, Chapter 10 and Chapter 11 of this standard are
mandatory and the others are recommendatory.
This standard is modified in relation to ISO 18283.2006(E) "Hard Coal and
Coke-Manual Sampling" (English version).
This standard was re-drafted mainly according to ISO 18283.2006(E). The list for
comparison of chapter and article numbers between this standard and ISO 18283.2006(E) is
given in Appendix A.
In consideration of the national condition of China, this standard is subjected to some
modifications in the adoption of ISO 18283.2006(E). Technical differences have already been
incorporated into the text and marked with perpendicular single line at the margin of relevant
clauses. The list for these technical differences and their reasons is given in Appendix B for
reference.
For convenient application, some editorial changes are made to ISO 18283.2006(E) as
follows.
——"This international standard" is replaced by "this standard";
——Introduction of ISO 18283.2006(E) is modified;
——Comma ",", which serves as decimal point in ISO standard, is replaced by ".".
This standard replaces GB 474-1996 "Preparation of Coal Sample".
Compared with GB 474-1996, main changes of this standard are as follows.
——Contents on general and precision of sample preparation (Chapter 3 of the original
edition and Chapter 4 of this edition) are improved;
——Contents on sample constitution are added (Chapter 6 of this edition);
——"Coal sample greater than 25mm (particle size) shall not be divided before being
crushed" is modified into "division may be carried out at any stage and the minimum mass of
divided sample shall meet those specified in 7.2" (6.3 of the original edition and 7.1 of this
edition);
——The minimum mass of divided sample at each particle size level is modified (6.7 of
the original edition and 7.2 of this edition);
——Contents on mechanical dividing method and mechanical divider are added (7.3 of
this edition);
——Two manual dividing methods are added (7.4.2 and 7.4.3 of this edition);
——Detailed explanations and specifications on division, reduction, mixing and
air-drying etc. are added (Chapter 7, Chapter 8, Chapter 9 and Chapter 10 of this edition);
——Preparation methods of various coal samples are added (Chapter 11 of this edition);
——Operating requirements for extracting moisture sample of coal from common
sample of coal with the nine-point picking out method are defined (11.4.1 of this edition).
Appendix A and Appendix B of this standard are informative, Appendix C and Appendix
D of this standard are normative.
This national standard is proposed by the China National Coal Association.
This standard is under the jurisdiction of the National Technical Committee on Coal
Chemical Industry of Standardization Administration of China.
1NATIONAL STANDARD
OF THE PEOPLE'S REPUBLIC OF CHINA
Method for Preparation of Coal Sample
1 Scope
This standard specifies terms and definitions, sample constitution, reduction, mixing,
division and air-drying for coal sample preparation, the preparation of various coal samples
and reserve sample.
This standard is applicable to lignite, bitumite and hard coal.
2 Normative References
The following documents contain provisions which, through reference in this standard,
constitute provisions of this standard. For dated references, subsequent amendments to
(excluding correction to), or revisions of, any of these publications do not apply. However,
parties to agreements based on this standard are encouraged to investigate the possibility of
applying the most recent editions of the standards indicated below. For undated references, its
latest editions apply.
GB/T 211 "Determination of Total Moisture in Coal" (GB/T 211-2007, ISO 589-2003,
NEQ)
GB/T 217 "Determination of True Relative Density of Coal"
GB 475 "Method for Manual Sampling of Commercial Coal" (GB 475-2008, ISO 18283.
2006 "Hard Coal and Coke-Manual Sampling", MOD)
GB/T 19494.3 "Mechanical Sampling of Coal-Part 3.Determination of Precision and
Bias Test" (GB/T 19494.3-2004, ISO 13909-7.2001, ISO 13909-8.2001, NEQ)
3 Terms and Definitions
Terms and definitions specified in GB 475 and those below are applicable to this
standard.
3.1
Sample preparation
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB 474-2008 be delivered?Answer: The full copy PDF of English version of GB 474-2008 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB 474-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB 474-2008_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 474-2008 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB 474-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 474-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB 474-2008?A step-by-step guide to download PDF of GB 474-2008_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as USD, Euro, KRW, JPY, AUD, CAD, RMB, IDR, INR, THB, HKD etc.).
Step 2: Search keyword "GB 474-2008".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 | Steps 4~6 | Step 7 | Step 8 | Step 9
|